Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£14.78
The WAGO 756-5404/030-010 is a factory-assembled 1 m, 3-pole M12 sensor/actuator cable featuring a right-angled M12 A-coded female socket at one end and a right-angled M12 A-coded male plug at the other. Designed for industrial automation, machine building and field-device connectivity, this cable provides a compact and convenient solution for connecting compatible sensors, actuators and industrial I/O equipment.
Part of the WAGO 756 Series, this cable assembly features 90° connector outlets at both ends, making it particularly suitable for installations where straight connectors would require additional clearance. Its factory-fitted M12 interfaces eliminate manual connector assembly and help simplify installation, maintenance and equipment replacement.
The cable uses three 0.34 mm² conductors within a flexible, black, halogen-free polyurethane (PUR) sheath. Its unshielded construction is suitable for conventional industrial sensor and actuator connections where additional electromagnetic screening is not required.
With a 250 V AC/DC operating voltage, 4 A operating current, 2.5 kV rated surge voltage and IP67 connector protection when correctly mated, the WAGO 756-5404/030-010 provides a reliable, space-efficient connection solution for industrial automation systems.
Industrial automation systems require dependable electrical connections between sensors, actuators, distributed I/O equipment and machine controllers. The WAGO 756-5404/030-010 provides a factory-assembled M12 cable solution designed to simplify installation while supporting reliable field-device connectivity.
The cable features right-angled M12 connectors at both ends. The female socket connects to a compatible M12 male interface, while the male plug connects to a compatible M12 female interface. Both connectors allow the cable to exit at 90° relative to the mating direction, helping simplify routing in confined spaces.
This configuration is particularly useful where sensors, actuators or I/O modules are mounted close to machine frames, guards or adjacent components. By reducing the straight-line clearance required at the connector, the angled arrangement can help improve cable organisation and installation accessibility.
The 3-pole construction provides three electrical paths through the cable. The conductors correspond to M12 pins 1, 3 and 4, with brown, blue and black identification respectively. This configuration is commonly associated with three-wire industrial sensor connections, although the actual function of each pin must be checked against the connected equipment's documentation.
The 1 m cable length is suitable for compact machinery and short device-to-device connections. The factory-fitted connectors eliminate manual conductor termination and support straightforward replacement of compatible cable assemblies during maintenance.
The unshielded cable construction is intended for compatible industrial sensor and actuator circuits where additional electromagnetic screening is not required. For applications with significant electrical interference, the complete installation's electromagnetic compatibility requirements should be considered.
The black PUR sheath provides a flexible, mechanically durable cable construction. Its halogen-free, flame-resistant and self-extinguishing material characteristics support industrial installations where cable durability and material properties are important.
The cable is specified as suitable for drag chain applications. For moving installations, the manufacturer's requirements for bending radius, mechanical loading, cable guidance and operating temperature should be followed.
The IP67 connector protection rating applies when both M12 connectors are correctly mated with compatible counterparts. Proper connector engagement and the specified tightening torque help maintain the intended environmental protection.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Positioning cable feed, box-sided | Angled |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 1 m |
| Material of contact surface | Other |
| Rated voltage | 250 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5404/030-010 |
| Product series | 756 Series |
| Product category | Sensor/Actuator Cable Assembly |
| Connection configuration | M12 female socket to M12 male plug |
| Connector 1 | M12 A-coded female socket |
| Connector 2 | M12 A-coded male plug |
| Connector 1 orientation | Right-angled, 90° |
| Connector 2 orientation | Right-angled, 90° |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 2.5 kV |
| Conductor cross-section | 0.34 mm² |
| Conductor configuration | 3 × 0.34 mm² |
| Conductor material | Bare copper, fine-stranded |
| Conductor stranding | 42 × 0.1 mm |
| Pin 1 | Brown conductor |
| Pin 3 | Blue conductor |
| Pin 4 | Black conductor |
| Shielding | Unshielded |
| Cable type | LiF9YH-11YH or LiF9YC11YFHF |
| Cable construction | Round multicore cable |
| Conductor insulation | PP9Y, halogen-free |
| Cable sheath material | Polyurethane (PUR) |
| Cable sheath colour | Black |
| Nominal cable diameter | 4.3 mm |
| Cable diameter range | 4.1–4.5 mm |
| Halogen-free | Yes, according to DIN VDE 0472 Part 815 |
| Flame characteristics | Flame-resistant and self-extinguishing, according to IEC 332-2 |
| Connector housing material | Polyurethane (PUR) |
| Contact material | Copper-tin alloy (CuSn) |
| Contact plating | Nickel/gold (CuNi/Au) |
| Connector tightening torque | 1 Nm |
| Degree of protection | IP67 when correctly mated |
| Pollution degree | 3 according to VDE 0110 |
| Operating temperature, stationary installation | −50 to +90 °C |
| Operating temperature, moving installation | −25 to +90 °C |
| Drag chain suitability | Yes, subject to manufacturer installation requirements |
| Product weight | 46 g |
| Country of origin | Hungary |
| GTIN / EAN | 4044918975117 |
| Typical application | Industrial sensor and actuator interconnection |
The WAGO 756-5404/030-010 is an industrial sensor/actuator cable used to connect compatible automation equipment through a right-angled 3-pole M12 A-coded female socket and a right-angled 3-pole M12 A-coded male plug.
The cable is 1 m long, making it suitable for short connections between nearby industrial sensors, actuators and control equipment.
It features a 90° right-angled 3-pole M12 A-coded female socket at one end and a 90° right-angled 3-pole M12 A-coded male plug at the other. Both connectors are factory-assembled.
No. The WAGO 756-5404/030-010 is unshielded and is suitable for compatible industrial sensor and actuator circuits where additional electromagnetic screening is not required.
The cable has an operating voltage of 250 V AC/DC, an operating current of 4 A and a rated surge voltage of 2.5 kV. The complete installation must remain within the electrical ratings of the connected equipment.
The cable contains three 0.34 mm² conductors, identified as brown on pin 1, blue on pin 3 and black on pin 4.
The connectors have an IP67 protection rating when correctly mated with compatible M12 counterparts. Both connections must be properly secured to maintain the intended environmental protection.
The 90° connector outlets allow the cable to exit sideways from compatible M12 interfaces, helping simplify routing where straight connector clearance is limited.
Yes. The cable is specified as suitable for drag chain applications, provided the manufacturer's requirements for bending radius, mechanical loading and cable guidance are followed.
The WAGO 756-5404/030-010 has a nominal cable diameter of 4.3 mm, with a specified range of 4.1–4.5 mm.
WAGO sensor/actuator cable assemblies provide practical connectivity for industrial automation and machine building. The WAGO 756-5404/030-010 combines two right-angled 3-pole M12 A-coded connectors, a 1 m flexible PUR cable and IP67 connector protection to support compact, dependable field wiring in manufacturing, material handling and automated production equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.