Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£63.79
The WAGO 756-5401/060-020 is a high-quality, pre-assembled 5-pole shielded M12 A-coded sensor/actuator cable designed for reliable industrial automation connections. Featuring a straight M12 female socket at one end and a straight M12 male plug at the other, this 2 m cable provides a convenient connection solution for compatible sensors, actuators, distributed I/O modules and control equipment.
Unlike unshielded M12 cable assemblies, the WAGO 756-5401/060-020 incorporates an overall tinned copper braided shield with approximately 80% optical coverage. This construction helps reduce susceptibility to electromagnetic interference when the cable shielding is correctly integrated into the installation's grounding and electromagnetic compatibility design.
With a durable black polyurethane (PUR) outer sheath, 250 V AC/DC operating voltage, 4 A operating current and IP67-rated M12 connections when correctly mated, the WAGO 756-5401/060-020 is designed for demanding industrial environments. Its factory-assembled connectors simplify installation, while its flexible construction supports applications where dependable signal transmission and mechanical durability are important.
Modern industrial automation systems depend on dependable electrical connections between sensors, actuators, distributed I/O modules and control equipment. The WAGO 756-5401/060-020 provides a standardised 5-pole M12 A-coded female-to-male connection, allowing compatible devices to be connected using a factory-assembled cable rather than individually terminated conductors.
A key feature of this cable is its tinned copper braided shield, which provides approximately 80% optical coverage. In industrial environments containing variable-speed drives, motors, switching equipment and other potential interference sources, shielding can help improve electromagnetic compatibility. Effective performance depends on correct shield continuity, connector compatibility, grounding and cable routing.
The straight M12 female and male connectors provide a convenient arrangement for extending compatible M12 connections. Both ends are factory-assembled, helping reduce installation work and providing a repeatable connection solution for machine builders, maintenance engineers and automation integrators.
The 2 m cable length is particularly useful for connections between nearby industrial devices, including sensors, I/O modules and machine-mounted equipment. The cable's 0.34 mm² conductors and 250 V AC/DC, 4 A electrical ratings support suitable industrial circuits, provided the complete system remains within the ratings of its lowest-rated component.
The black PUR sheath and halogen-free cable construction are designed for demanding industrial use. WAGO also specifies drag-chain suitability, making the cable suitable for consideration in applications involving repeated movement when the manufacturer's bending radius, routing and mechanical requirements are followed.
Both M12 interfaces provide IP67 protection when correctly mated to compatible connectors. This helps protect against dust and temporary water immersion, but the protection rating depends on proper connector engagement and does not apply to disconnected or incorrectly sealed connections.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Screened | Yes |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 2 m |
| Material of contact surface | Nickel/gold |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5401/060-020 |
| Product series | 756 |
| Product type | Shielded M12 sensor/actuator connection cable |
| Connection configuration | M12 female socket to M12 male plug |
| Connector 1 | Straight M12 female socket |
| Connector 2 | Straight M12 male plug |
| Connector coding | A-coded at both ends |
| Connector orientation | 0° / straight at both ends |
| Nominal cable length | 2 m |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Protection rating | IP67 when correctly mated |
| Shielding | Shielded |
| Shield material | Tinned copper braid |
| Shield optical coverage | Approximately 80% |
| Cable type code | Li9YC11Y-HF 5x0.34 mm² |
| Number of conductors | 5 |
| Conductor cross-section | 0.34 mm² |
| Conductor construction | Bare copper wire, 7 × 0.25 mm |
| Conductor insulation | Halogen-free polyethylene (PE) |
| Outer sheath material | PUR (polyurethane) |
| Outer sheath colour | Black |
| Overall cable diameter | 6.3–6.7 mm |
| Connector housing material | PUR (polyurethane) |
| Contact material | CuSn (copper-tin alloy) |
| Contact plating | CuNi/Au |
| Connector tightening torque | 1 Nm |
| Operating temperature, stationary | −50 to +90 °C |
| Operating temperature, moving | −25 to +90 °C |
| Halogen-free | Yes, according to DIN VDE 0472 Part 815 |
| Flame resistance | Self-extinguishing according to IEC 332-2 |
| Drag-chain suitability | Yes |
| Pollution degree | 3 according to VDE 0110 |
| Product weight | 154 g |
| UL approval | UL 2238 |
| Country of origin | Hungary |
| EAN / GTIN | 4045454724634 |
| Packaging unit | 1 piece |
| Termination | Factory-assembled M12 connectors at both ends |
The WAGO 756-5401/060-020 is a pre-assembled, shielded industrial sensor/actuator cable used to connect or extend compatible M12 field-device connections. It features a straight 5-pole M12 A-coded female socket at one end and a straight male plug at the other.
The cable has a nominal length of 2 m and features straight 5-pole M12 A-coded female and male connectors. Both ends are factory-terminated, so no free-wire termination is required.
Yes. The WAGO 756-5401/060-020 is shielded using a tinned copper braid with approximately 80% optical coverage. The shielding helps manage electromagnetic interference when correctly connected and grounded as part of the complete installation.
The cable has an operating voltage of 250 V AC/DC, an operating current of 4 A and a rated surge voltage of 1.5 kV. The complete installation must remain within the applicable ratings of the cable, connectors and connected equipment.
Yes. The cable features a halogen-free PUR outer sheath, IP67-rated M12 connectors when correctly mated and specified drag-chain suitability. Its operating temperature ranges are −50 to +90 °C for stationary use and −25 to +90 °C for moving applications, subject to the manufacturer's installation requirements.
WAGO industrial connection technology supports dependable field-device wiring in machine building, manufacturing and distributed automation systems. The WAGO 756-5401/060-020 combines straight 5-pole M12 A-coded female and male connectors, a 2 m shielded PUR cable, tinned copper braided shielding and IP67 connector protection to provide a practical connection solution for compatible industrial sensors, actuators and control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.