Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£37.33
The WAGO 756-5401/060-010 is a high-quality 5-pole shielded M12 sensor/actuator connection cable designed for reliable connections between industrial sensors, actuators and automation equipment. Featuring a straight M12 A-coded female socket and a straight M12 A-coded male plug, this factory-assembled cable provides a convenient solution for extending compatible industrial field-device connections.
As part of the WAGO 756 sensor/actuator connectivity series, the cable combines dependable electrical connectivity with shielded construction to support electromagnetic compatibility in industrial installations. Its black polyurethane (PUR) outer sheath offers mechanical durability, while the IP67-rated connector interfaces provide protection against dust and temporary water immersion when correctly mated.
With a 1 m cable length, 4 A operating current and 250 V AC/DC operating voltage, the WAGO 756-5401/060-010 is particularly suitable for compact automation installations. Its straight female-to-male connector arrangement allows compatible M12 devices to be connected without manual conductor termination, helping simplify installation and maintenance.
The WAGO 756-5401/060-010 provides a compact, factory-assembled connection between compatible M12 industrial devices. Its 5-pole A-coded female and male connectors enable direct connections between suitable sensors, actuators, distribution modules and industrial control equipment. The straight connector configuration is especially practical where both devices provide sufficient clearance for an in-line cable connection.
The cable incorporates an overall tinned copper braid shield with approximately 80% optical coverage. This shielding supports electromagnetic interference management when the cable is correctly integrated into an appropriately designed installation. Proper grounding, shield continuity and cable routing remain important for achieving the required electromagnetic compatibility performance.
Its 1 m black PUR cable provides a convenient length for compact machinery, local field-device extensions and distributed automation installations. The halogen-free, flame-resistant and self-extinguishing sheath contributes to the cable's suitability for industrial environments, while the IP67-rated M12 connector interfaces help protect the electrical connections against dust and moisture when correctly mated.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Screened | Yes |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 1 m |
| Material of contact surface | Nickel/gold |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Series | 756 Sensor/Actuator Connectivity |
| Manufacturer part number | 756-5401/060-010 |
| Product type | Shielded sensor/actuator connection cable |
| Connection type | M12 socket to M12 plug |
| Connector 1 | M12 female socket, straight |
| Connector 2 | M12 male plug, straight |
| Connector coding | A-coded at both ends |
| Connector size | M12 |
| Connector orientation | Straight / straight (0° / 0°) |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Protection rating | IP67 |
| Number of conductors | 5 |
| Nominal conductor cross-section | 0.34 mm² |
| Cable type | Li9YC11Y-HF 5 × 0.34 mm² |
| Cable construction | Round, multicore |
| Conductor material | Bare copper |
| Conductor construction | 7 × 0.25 mm |
| Conductor insulation | Halogen-free polyethylene (PE) |
| Shielding | Shielded |
| Shield material | Tinned copper braid |
| Shield coverage | Approximately 80% optical coverage |
| Cable sheath material | Polyurethane (PUR) |
| Cable colour | Black |
| Cable outer diameter | 6.3–6.7 mm |
| Halogen-free | Yes, according to DIN VDE 0472 Part 815 |
| Flame resistance | IEC 332-2 |
| Sheath properties | Self-extinguishing |
| Contact material | Copper-tin alloy (CuSn) |
| Contact plating | Copper-nickel/gold (CuNi/Au) |
| Connector housing material | Polyurethane (PUR) |
| Connector tightening torque | 1 Nm |
| Operating temperature, fixed installation | -50 to +90 °C |
| Operating temperature, moving installation | -25 to +90 °C |
| Drag-chain suitability | Yes |
| Pollution degree | 3 according to VDE 0110 |
| Connector mounting | Free-hanging / in-line |
| Product weight | 92 g |
| Country of origin | Hungary |
| EAN / GTIN | 4045454724641 |
The WAGO 756-5401/060-010 is a 5-pole shielded M12 sensor/actuator connection cable used to connect compatible industrial sensors, actuators and automation equipment. Its female-to-male configuration is also suitable for extending compatible M12 connections.
The cable has a straight M12 A-coded female socket at one end and a straight M12 A-coded male plug at the other. Both connectors are factory assembled.
The cable is 1 m (1,000 mm) long, making it suitable for short-distance connections between nearby industrial devices and automation equipment.
Yes. The cable features an overall tinned copper braid shield with approximately 80% optical coverage. Correct shield termination and installation practices are important for electromagnetic compatibility.
The cable has a 4 A operating current, a 250 V AC/DC operating voltage and a 1.5 kV rated surge voltage. The complete installation must remain within the ratings of all connected components.
Yes. The cable's M12 connector interfaces provide IP67 protection when correctly mated with compatible connectors, offering protection against dust ingress and temporary water immersion under the relevant test conditions.
The cable has a black polyurethane (PUR) sheath that is halogen-free according to DIN VDE 0472 Part 815, flame-resistant according to IEC 332-2 and self-extinguishing.
The WAGO 756-5401/060-010 features five conductors with a nominal cross-section of 0.34 mm² each, within a shielded multicore cable construction.
Yes. WAGO identifies the cable as suitable for drag-chain applications. The installation must comply with the manufacturer's specified bending radius, movement and environmental operating conditions.
The cable supports temperatures from -50 to +90 °C in fixed installations and -25 to +90 °C in moving installations, subject to the specified operating conditions.
WAGO sensor/actuator connection cables provide dependable connectivity for industrial automation engineers, machine builders and maintenance professionals. The 756-5401/060-010 combines a 1 m shielded PUR cable, straight 5-pole M12 A-coded female and male connectors, and IP67-rated connection protection to support reliable industrial field-device wiring and automation system integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.