Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£17.94
The WAGO 756-5312/050-050 is a pre-assembled 5-pole M12 A-coded sensor/actuator cable designed for dependable industrial automation connections. Featuring a 90° angled M12 male plug at one end and free wire ends at the other, it provides a practical connection between compatible field devices and industrial control equipment.
Part of the WAGO 756 series, this cable features a durable black polyurethane (PUR) outer sheath designed for demanding industrial environments. Its halogen-free construction and resistance to oils, chemicals, UV radiation, hydrolysis and microbial attack support reliable operation in manufacturing and machine-building applications.
With a nominal length of 5 m, an operating voltage of 250 V AC/DC and an operating current rating of 4 A, the WAGO 756-5312/050-050 is suitable for a variety of compatible sensor and actuator connections. Its IP67-rated M12 interface provides protection against dust and temporary water immersion when correctly mated, while the angled connector helps accommodate installations with restricted clearance.
Modern industrial automation systems depend on secure electrical connections between sensors, actuators, distributed I/O modules and control equipment. The WAGO 756-5312/050-050 provides a standardised 5-pole M12 A-coded male interface for compatible equipment, making it a practical choice for machine building and industrial control applications.
The 90° angled connector is especially useful where equipment is installed close to machine frames, protective guards or adjacent components. Rather than requiring the cable to exit directly outward, the right-angle design helps engineers route the cable alongside equipment, supporting organised installations where connection space is limited.
The free wire ends allow the cable to be terminated into suitable terminal blocks, junction boxes or control cabinets. This provides installation flexibility while retaining the convenience of a factory-assembled M12 connector at the field-device end. The cable's unshielded construction makes it appropriate for applications where additional electromagnetic shielding is not specified.
The PUR outer sheath is designed for industrial conditions involving exposure to oils, chemicals, UV radiation, hydrolysis and microbial attack. Its halogen-free construction and specified drag-chain compatibility also make it suitable for consideration in moving machinery, provided the manufacturer's bending radius, travel speed and installation requirements are observed.
The IP67-rated M12 connector helps protect the electrical interface against dust and temporary water immersion when correctly mated to a compatible socket. The unterminated cable end does not independently provide IP67 protection and must be installed within a suitable enclosure or termination system where environmental sealing is required.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Cable length | 1.5 m |
| Material of contact surface | Other |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5312/050-050 |
| Product series | 756 |
| Product type | Sensor/actuator connection cable |
| Connection type | M12 male plug to free wire ends |
| Connector interface | M12 |
| Connector gender | Male |
| Connector coding | A-coded |
| Connector orientation | Angled, 90° |
| Number of conductors | 5 |
| Nominal cable length | 5 m |
| Operating voltage | 250 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Protection rating | IP67 when correctly mated |
| Conductor cross-section | 0.34 mm² |
| Pin 1 | Brown |
| Pin 2 | White |
| Pin 3 | Blue |
| Pin 4 | Black |
| Pin 5 | Grey |
| Shielding | Unshielded |
| Outer sheath material | PUR (polyurethane) |
| Outer sheath colour | Black |
| Operating temperature, stationary | −50 to +90 °C |
| Operating temperature, moving | −25 to +90 °C |
| Insulation resistance | Greater than 109 Ω |
| Contact resistance | 10 mΩ |
| Conductor resistance | ≤60 Ω/km |
| Pollution degree | 3 according to VDE 0110 |
| Halogen-free | Yes |
| Drag-chain compatibility | Yes |
| Minimum drag-chain bending radius | 10 × cable diameter |
| Specified bending endurance | 2 million cycles under defined test conditions |
| Maximum drag-chain travel speed | 3.33 m/s |
| Maximum horizontal travel path | 5 m |
| Maximum vertical travel path | 2 m |
| Torsional capacity | 180°/m |
| Oil resistance | Yes |
| Chemical resistance | Yes |
| UV resistance | Yes |
| Hydrolysis resistance | Yes |
| Microbial resistance | Yes |
| Cable listing | UL-listed cable |
| EAN / GTIN | 4045454942342 |
| Termination | Factory-assembled angled M12 male plug with free wire ends |
The WAGO 756-5312/050-050 is an industrial sensor/actuator connection cable used to connect compatible field devices to automation and control equipment. It features an angled 5-pole M12 A-coded male plug and free wire ends.
The cable is 5 m long and features a 90° angled, 5-pole M12 A-coded male plug at one end and free wire ends at the other. It is designed to mate with compatible M12 female interfaces.
No. The WAGO 756-5312/050-050 is unshielded. It is intended for compatible sensor and actuator connections where additional electromagnetic shielding is not required. For installations with specific electromagnetic compatibility requirements, a suitable shielded alternative should be considered.
The cable has an operating voltage of 250 V AC/DC, an operating current rating of 4 A and a rated surge voltage of 1.5 kV. The complete installation must remain within the applicable ratings of the cable and connected equipment.
Yes. WAGO specifies drag-chain compatibility and a bending endurance of 2 million cycles under defined test conditions. The minimum specified bending radius is 10 times the cable diameter. Actual service life depends on the operating conditions, cable routing and compliance with the manufacturer's installation requirements.
WAGO industrial connection technology supports dependable field-device wiring in machine building, manufacturing and distributed automation systems. The WAGO 756-5312/050-050 combines a 90° angled 5-pole M12 A-coded male connector, a durable 5 m PUR cable and flexible free-wire termination to support practical sensor and actuator connections in industrial machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.