Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.03
The WAGO 756-5312/030-015 is a factory-assembled 1.5 m industrial sensor/actuator cable featuring a 3-pole, right-angled M12 A-coded male plug and an unterminated free cable end. Designed for industrial automation, machine building and field wiring, this cable provides a convenient connection between compatible M12 female interfaces and control equipment, junction boxes or terminal blocks.
Part of the WAGO 756 Series, this cable combines standardised M12 connectivity with a durable black polyurethane (PUR) outer sheath. Its flexible, halogen-free construction is well suited to industrial installations where dependable electrical connections, mechanical durability and straightforward cable routing are important.
The 90° angled connector is particularly useful where space around the connection point is restricted. Instead of extending directly away from the equipment, the cable exits at a right angle, helping installers route wiring alongside machine frames, sensor brackets and compact automation assemblies.
With a 1.5 m cable length, 250 V AC/DC operating voltage, 4 A rated current, 3 × 0.34 mm² conductor configuration and IP67 connector protection, the WAGO 756-5312/030-015 offers a practical solution for reliable industrial sensor and actuator connections.
Industrial automation installations often require dependable connections in compact spaces where straight connectors can make cable routing difficult. The WAGO 756-5312/030-015 addresses this requirement with a 90° right-angled M12 male plug, allowing the cable to exit sideways from a compatible female connection.
This connector arrangement is particularly useful for sensors mounted close to machine frames, guards, brackets and other equipment. By directing the cable at a right angle, the assembly can help reduce the space required behind the connection and support tidier cable management.
The 3-pole M12 A-coded interface provides a standardised connection for compatible industrial sensors and actuators. Its factory-assembled construction reduces the need for field connector assembly and helps simplify installation, maintenance and replacement.
The cable contains three 0.34 mm² conductors, identified by brown, blue and black insulation. These correspond to connector pins 1, 3 and 4 respectively, supporting straightforward conductor identification during installation. The final wiring arrangement should always follow the electrical requirements of the connected equipment.
With a 1.5 m cable length, the WAGO 756-5312/030-015 is suitable for short-distance connections between field-mounted devices and nearby junction boxes, distributed I/O equipment or control panels. The unterminated cable end allows installers to prepare and terminate the conductors according to the application.
The PUR cable sheath provides flexibility and mechanical durability for industrial use. Its unshielded construction makes it a practical choice for compatible conventional sensor and actuator circuits where additional electromagnetic screening is not required.
The IP67 protection rating applies when the M12 connector is correctly mated with a compatible counterpart. The free cable end must be appropriately terminated and protected to maintain the environmental integrity of the complete installation.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Cable length | 1.5 m |
| Material of contact surface | Other |
| Rated voltage | 250 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5312/030-015 |
| Product series | 756 Series |
| Product category | Sensor/Actuator Cable |
| Connection configuration | M12 male plug to free cable end |
| Connector size | M12 |
| Connector gender | Male |
| Connector coding | A-coded |
| Connector orientation | Right-angled, 90° |
| Operating voltage | 250 V AC/DC |
| Rated operating current | 4 A |
| Conductor configuration | 3 × 0.34 mm² |
| Pin 1 | Brown conductor |
| Pin 3 | Blue conductor |
| Pin 4 | Black conductor |
| Cable type | Round multicore cable |
| Cable sheath material | Polyurethane (PUR) |
| Cable sheath colour | Black |
| Nominal cable diameter | 4.3 mm |
| Cable diameter tolerance | ±0.2 mm |
| Shielding | Unshielded |
| Halogen-free | Yes |
| Contact base material | Copper-tin alloy (CuSn) |
| Contact resistance | 10 mΩ |
| Degree of protection | IP67 when correctly mated |
| Operating temperature, stationary installation | −50 to +90 °C |
| Operating temperature, moving installation | −25 to +90 °C |
| Connector arrangement | Factory-assembled right-angled M12 male plug with free cable end |
| GTIN / EAN | 4045454942205 |
| Typical application | Industrial sensor and actuator wiring |
The WAGO 756-5312/030-015 is an industrial sensor/actuator cable used to connect compatible automation equipment through a right-angled 3-pole M12 A-coded male plug and an unterminated free cable end.
The cable is 1.5 m long, making it suitable for short-distance connections between industrial field devices and nearby control equipment.
It features a 90° right-angled, 3-pole M12 A-coded male plug at one end and an unterminated free cable end at the other.
The WAGO 756-5312/030-015 has an operating voltage of 250 V AC/DC and a rated operating current of 4 A, subject to the ratings of the connected equipment.
The cable contains three 0.34 mm² conductors, identified by brown, blue and black insulation. These correspond to connector pins 1, 3 and 4 respectively.
No. The WAGO 756-5312/030-015 is an unshielded cable, intended for compatible industrial sensor and actuator circuits where additional electromagnetic screening is not required.
The cable has an IP67 connector protection rating when the M12 plug is correctly mated with a compatible connector. The free cable end requires suitable termination and environmental protection.
A right-angled M12 connector allows the cable to exit at 90° from the connection point, making it particularly useful where axial clearance is limited or where wiring needs to run alongside machine frames and equipment.
The WAGO 756-5312/030-015 has a nominal cable diameter of 4.3 mm, with a specified tolerance of ±0.2 mm.
WAGO sensor/actuator cables provide dependable connectivity for modern industrial automation systems. The WAGO 756-5312/030-015 combines a right-angled 3-pole M12 A-coded male plug, 1.5 m flexible PUR cable and IP67 connector protection to support reliable field wiring in compact machinery, manufacturing equipment and automated production installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.