Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£61.96
The WAGO 756-5311/090-100 is a factory-assembled 10 m shielded industrial sensor/actuator cable featuring a straight, 8-pole M12 male plug and an unterminated free cable end. Designed for industrial automation and field wiring, this cable provides a convenient connection between compatible 8-pole M12 interfaces and industrial control equipment, terminal blocks or distributed I/O systems.
Part of the WAGO 756 Series, the 756-5311/090-100 combines an 8-contact M12 connection with a screened cable construction. Its eight 0.25 mm² conductors provide multiple electrical connections within a single cable assembly, making it particularly useful for compatible multi-signal sensors, actuators and automation devices.
The cable features a black polyurethane (PUR) outer sheath designed for demanding industrial environments. Its shielded construction helps manage electromagnetic interference when correctly terminated and integrated into an appropriate grounding arrangement, while the flexible sheath supports installation in industrial machinery and moving equipment.
With a 10 m cable length, 250 V AC/DC operating voltage, 4 A maximum operating current, 1.5 kV rated surge voltage and IP67 connector protection, the WAGO 756-5311/090-100 provides a practical solution for reliable industrial connectivity.
Modern industrial automation systems increasingly rely on reliable multi-conductor connections between sensors, actuators, distributed I/O equipment and machine control systems. The WAGO 756-5311/090-100 provides a factory-assembled 8-pole M12 connection solution that helps simplify industrial field wiring.
The straight 8-pole M12 male plug provides a standardised connection to compatible female interfaces. Its factory-assembled construction reduces the need for manual connector assembly, while the unterminated free cable end allows the conductors to be connected according to the requirements of the installation.
The cable contains eight 0.25 mm² conductors, identified by white, brown, green, yellow, grey, pink, blue and red insulation. These correspond to connector pins 1 through 8 respectively, supporting straightforward conductor identification during installation and maintenance.
The shielded cable construction is particularly useful where electromagnetic compatibility must be considered. Industrial equipment such as variable frequency drives, motors and switching devices can generate electromagnetic interference. Correctly installed cable shielding can help reduce unwanted interference in connected circuits.
The 10 m cable length provides flexibility when routing connections between field-mounted equipment and control panels or distributed I/O systems. For longer cable runs, installers should consider conductor resistance, voltage drop, signal characteristics and the requirements of the connected equipment.
The PUR cable sheath provides flexibility and durability for industrial environments. The cable is specified as suitable for drag chain applications, with a bending endurance of at least two million cycles under the manufacturer's stated test conditions. Actual service life depends on cable routing, bending radius, movement speed and mechanical loading.
The IP67 connector protection rating applies when the M12 plug is correctly mated with a compatible connector. The free cable end must be suitably terminated and protected, while the cable screen should be connected according to the electromagnetic compatibility requirements of the installation.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Screened | Yes |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Cable length | 10 m |
| Material of contact surface | Other |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5311/090-100 |
| Product series | 756 Series |
| Product category | Shielded Sensor/Actuator Cable |
| Connection configuration | M12 male plug to free cable end |
| Connector size | M12 |
| Connector gender | Male |
| Connector orientation | Straight |
| Operating voltage | 250 V AC/DC |
| Maximum operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Conductor configuration | 8 × 0.25 mm² |
| Pin 1 | White conductor |
| Pin 2 | Brown conductor |
| Pin 3 | Green conductor |
| Pin 4 | Yellow conductor |
| Pin 5 | Grey conductor |
| Pin 6 | Pink conductor |
| Pin 7 | Blue conductor |
| Pin 8 | Red conductor |
| Shielding | Shielded |
| Cable type | Round multicore industrial cable |
| Cable sheath material | Polyurethane (PUR) |
| Cable sheath colour | Black |
| Nominal cable diameter | 6.3 mm |
| Cable diameter tolerance | ±0.2 mm |
| Degree of protection | IP67 when correctly mated |
| Operating temperature, moving installation | −25 to +90 °C |
| Drag chain suitability | Yes |
| Drag chain bending endurance | At least 2 million bending cycles under specified test conditions |
| Connector arrangement | Factory-assembled straight M12 male plug with free cable end |
| Typical application | Shielded industrial sensor and actuator wiring |
The WAGO 756-5311/090-100 is a shielded industrial sensor/actuator cable used to connect compatible automation equipment through a straight 8-pole M12 male plug and an unterminated free cable end.
The cable is 10 m long, making it suitable for connecting industrial field devices to control equipment over extended installation distances.
It features a straight 8-pole M12 male plug at one end and an unterminated free cable end at the other.
Yes. The WAGO 756-5311/090-100 is a shielded cable intended for industrial applications where electromagnetic interference must be considered. Effective shielding depends on correct termination, grounding and installation.
The cable has an operating voltage of 250 V AC/DC, a maximum operating current of 4 A and a rated surge voltage of 1.5 kV.
The cable contains eight 0.25 mm² conductors, identified by white, brown, green, yellow, grey, pink, blue and red insulation, together with cable shielding.
Yes. The cable is specified as suitable for drag chain applications, with a bending endurance of at least two million cycles under specified test conditions. The manufacturer's mechanical installation requirements must be followed.
The cable has an IP67 connector protection rating when the M12 plug is correctly mated with a compatible connector. The free cable end requires suitable termination and environmental protection.
The WAGO 756-5311/090-100 has a nominal cable diameter of 6.3 mm, with a specified tolerance of ±0.2 mm.
WAGO shielded sensor/actuator cables provide dependable multi-conductor connectivity for industrial automation systems. The WAGO 756-5311/090-100 combines a straight 8-pole M12 male plug, 10 m shielded PUR cable, IP67 connector protection and drag chain suitability to support reliable industrial field wiring in machine building, manufacturing and automated production equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.