Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£21.66
The WAGO 756-5302/060-015 is a pre-assembled, 5-pole shielded M12 A-coded sensor/actuator cable designed for dependable electrical connections in industrial automation systems. Featuring a 90° angled M12 female socket at one end and free wire ends at the other, it provides a convenient solution for connecting compatible sensors, actuators and field devices to control equipment.
Unlike unshielded sensor cables, the WAGO 756-5302/060-015 incorporates an overall tinned copper braided shield with approximately 80% optical coverage. This construction helps reduce susceptibility to electromagnetic interference when the shield is correctly terminated and grounded. The cable also features a durable black polyurethane (PUR) sheath offering resistance to oils, chemicals, UV radiation, hydrolysis and microbes.
With a nominal length of 1.5 m, an operating voltage of 250 V AC/DC and a rated current of 4 A, this cable is suitable for a range of industrial sensor and actuator connections. Its angled connector supports installation in confined spaces, while the IP67-rated connection provides protection against dust and temporary water immersion when correctly mated.
Industrial automation equipment often operates close to motors, variable-speed drives, switching devices and other potential sources of electromagnetic interference. The WAGO 756-5302/060-015 addresses this challenge with an overall tinned copper braided shield, making it a useful option where shielded sensor and actuator connections are specified. To achieve effective electromagnetic compatibility, the shield must be terminated appropriately and the complete installation must follow the equipment manufacturer's grounding recommendations.
The 5-pole M12 A-coded connector provides a standardised circular interface for compatible industrial field devices. Its right-angle configuration is especially useful where space behind a sensor or actuator is limited. The factory-assembled female connector also helps maintain consistent connection quality, while the free cable end allows engineers to select a termination arrangement suitable for the control system.
The PUR cable sheath is intended for demanding industrial conditions, offering resistance to oils, chemicals, UV exposure, hydrolysis and microbial attack. Its halogen-free, flame-retardant construction supports industrial installations where material performance is important. The cable is also suitable for drag-chain applications, provided the manufacturer's bending, routing and movement requirements are respected.
For installations exposed to dust or moisture, the IP67-rated M12 interface helps protect the electrical connection when correctly mated. The open cable end does not independently provide IP67 protection and should be terminated inside an appropriately rated enclosure where environmental sealing is required.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Screened | Yes |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Cable length | 1.5 m |
| Material of contact surface | Nickel/gold |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5302/060-015 |
| Product series | 756 |
| Product type | Shielded sensor/actuator connection cable |
| Connector interface | M12 |
| Connector gender | Female socket |
| Connector coding | A-coded |
| Connector orientation | 90° angled |
| Termination | M12 female socket to free wire ends |
| Nominal cable length | 1.5 m |
| Operating voltage | 250 V AC/DC |
| Rated current | 4 A |
| Rated surge voltage | 1.5 kV |
| Protection rating | IP67 when correctly mated |
| Shielding | Overall tinned copper braid |
| Shield optical coverage | Approximately 80% |
| Cable designation | Li9YC11Y-HF 5 × 0.34 mm² |
| Number of conductors | 5 |
| Conductor cross-section | 0.34 mm² |
| Conductor material | Bare copper |
| Conductor construction | 7 × 0.25 mm |
| Conductor insulation | Halogen-free PE |
| Outer sheath material | PUR (polyurethane) |
| Outer sheath colour | Black |
| Overall cable diameter | 6.3–6.7 mm |
| Connector housing material | PUR (polyurethane) |
| Contact material | CuSn (copper-tin alloy) |
| Connector tightening torque | 1 Nm |
| Halogen-free standard | DIN VDE 0472 Part 815 |
| Flame resistance | IEC 332-2, self-extinguishing |
| Drag-chain suitability | Yes, subject to specified installation conditions |
| Oil resistance | Yes |
| Chemical resistance | Yes |
| UV resistance | Yes |
| Hydrolysis resistance | Yes |
| Microbial resistance | Yes |
| Approval | UL 2238 |
| Country of origin | Hungary |
| EAN / GTIN | 4045454724665 |
The WAGO 756-5302/060-015 is a shielded M12 sensor/actuator cable used to connect compatible industrial sensors and actuators to automation and control equipment. It features a 5-pole angled M12 female socket and free wire ends.
Yes. The cable has an overall tinned copper braided shield with approximately 80% optical coverage. This helps reduce electromagnetic interference when the shield is correctly terminated and grounded as part of the complete installation.
The cable is 1.5 m long and has a 90° angled, 5-pole M12 A-coded female socket at one end and free wire ends at the other. The angled connector is useful for installations with restricted clearance.
The cable has an operating voltage of 250 V AC/DC, a rated current of 4 A and a rated surge voltage of 1.5 kV. The complete circuit must remain within the ratings of all connected components.
Yes. The cable has a halogen-free PUR sheath with resistance to oils, chemicals, UV radiation, hydrolysis and microbes. The M12 connector provides IP67 protection when correctly mated, and the cable is suitable for drag-chain applications when installed according to the manufacturer's requirements.
WAGO connection technology is used in industrial automation, machine building and distributed control systems. The WAGO 756-5302/060-015 combines a shielded 5-pole M12 A-coded connection, a compact angled connector and a durable 1.5 m PUR cable to support dependable field-device connectivity in demanding industrial environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.