Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£12.25
The WAGO 756-5111/030-050 is a 5 m, 3-pole M8 sensor/actuator cable designed for reliable electrical connections in industrial automation and machine-building applications. Featuring a straight M8 male plug at one end and free wire ends at the other, this pre-assembled cable provides a convenient connection between compatible sensors, actuators and industrial control equipment.
Part of the WAGO 756 Series, the 756-5111/030-050 supports an operating voltage of 60 V AC/DC and an operating current of 4 A. Its three-pole connector, factory-assembled termination and IP67 protection rating make it suitable for industrial installations where dependable connectivity and straightforward wiring are essential.
The cable features a black, halogen-free polyurethane (PUR) outer sheath and three conductors with a cross-sectional area of 0.25 mm². Its robust construction provides good resistance to oils, chemicals, microbes, hydrolysis and UV radiation. With suitability for drag-chain applications, the WAGO 756-5111/030-050 is an effective choice for both stationary and appropriately specified moving machinery installations.
The WAGO 756-5111/030-050 provides a practical connection between compatible industrial sensors, actuators and control systems. Its straight, three-pole M8 male connector connects to a suitable female interface, while the free wire ends allow direct termination into appropriately rated electrical terminals.
The cable uses a conventional three-wire conductor assignment: brown for positive supply, blue for negative supply and black for signal. This arrangement is commonly used for industrial sensor circuits. Engineers should confirm the pin assignment and electrical requirements of the connected device before installation.
The 5 m cable length provides useful routing flexibility when sensors or actuators are installed away from their associated control equipment. The factory-assembled connector reduces wiring work, while the free wire ends provide flexibility when connecting to terminal blocks or control panels.
The halogen-free PUR sheath provides good resistance to oils, chemicals, microbial influences, hydrolysis and UV radiation. The cable is also suitable for drag-chain applications, with a specified minimum bending radius of 10 times the cable diameter and a rated bending endurance of 2 million cycles under defined operating conditions.
When correctly mated, the IP67-rated M8 connector provides protection against dust and temporary water immersion under specified test conditions. The free wire ends must be terminated within a suitably protected connection arrangement to maintain the required protection level of the complete installation.
| Type of electrical connection, field-sided | M8 |
|---|---|
| Type of electrical connection, box-sided | Other |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Cable length | 5 m |
| Material of contact surface | Other |
| Rated voltage | 60 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5111/030-050 |
| Product category | Industrial sensor/actuator cables |
| Product designation | Sensor/actuator cable; M8 plug; straight; 3-pole; length 5 m |
| Product series | WAGO 756 Series |
| Connection type | M8 plug to free wire ends |
| Connector type | M8 male plug |
| Connector orientation | Straight, 0° |
| Conductor cross-section | 0.25 mm² |
| Conductor construction | Fine-stranded bare copper, 42 × 0.1 mm |
| Conductor insulation | PP9Y, halogen-free |
| Cable diameter | 4.1 mm ± 0.2 mm |
| Operating voltage | 60 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Insulation resistance | > 109 Ω |
| Contact resistance | 10 mΩ |
| Conductor resistance | ≤ 60 Ω/km |
| Pollution degree | 3 according to VDE 0110 |
| Protection rating | IP67 when correctly mated |
| Contact material | Copper-tin alloy (CuSn) |
| Connector housing material | Polyurethane (PUR) |
| Connector tightening torque | 0.6 Nm |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Black |
| Shielding | Unshielded |
| Halogen-free | Yes |
| Flame-retardant sheath | Yes |
| Drag-chain compatible | Yes |
| Minimum bending radius | 10 × cable diameter |
| Specified bending cycles | 2 million |
| Maximum travel speed | 3.33 m/s |
| Maximum horizontal travel path | 5 m |
| Maximum vertical travel path | 2 m |
| Torsional capacity | 180°/m |
| Static operating temperature | −50 to +90 °C |
| Dynamic operating temperature | −25 to +90 °C |
| Oil resistance | Good |
| Chemical resistance | Good |
| Microbial resistance | Good |
| Hydrolysis resistance | Good |
| UV resistance | Good |
| Cable approval | UL-listed cable |
| Pin 1 conductor | Brown, positive supply (+) |
| Pin 3 conductor | Blue, negative supply (−) |
| Pin 4 conductor | Black, signal (S) |
| Assembly configuration | Factory-assembled straight M8 male plug with free wire ends |
| EAN / GTIN | 4045454941925 |
The WAGO 756-5111/030-050 is a 5 m, three-pole M8 sensor/actuator cable used to connect compatible industrial sensors and actuators to electrical terminals and automation equipment.
The cable has a fixed length of 5 m, providing convenient reach between field devices and control equipment.
The cable features a straight, three-pole M8 male plug at one end and free wire ends at the opposite end.
No. The cable has a factory-assembled M8 male connector at one end and unterminated conductors at the other, allowing connection to suitable electrical terminals.
The cable supports an operating voltage of 60 V AC/DC and an operating current of 4 A, subject to the ratings of the connected equipment and complete installation.
The three-pole cable uses pin 1 with a brown conductor for positive supply, pin 3 with a blue conductor for negative supply and pin 4 with a black conductor for signal. Always verify the connected device's wiring requirements before installation.
The cable uses three conductors with a cross-sectional area of 0.25 mm².
The cable has a nominal outer diameter of 4.1 mm ± 0.2 mm.
The M8 connector has an IP67 protection rating when correctly mated. The free wire ends must be terminated in a suitably protected connection arrangement.
No. The WAGO 756-5111/030-050 is an unshielded sensor/actuator cable intended for compatible industrial control connections.
The cable features a black polyurethane (PUR) outer sheath with halogen-free construction and good resistance to oils, chemicals, microbes, hydrolysis and UV radiation.
Yes. The cable is drag-chain compatible and is specified for 2 million bending cycles under defined operating conditions. Its minimum specified bending radius is 10 times the cable diameter.
The specified operating temperature range is −50 to +90 °C for static applications and −25 to +90 °C for dynamic applications.
Yes. The cable can connect a compatible three-wire sensor or actuator to a PLC input or other suitable control interface, provided the connector pinout and electrical ratings match the equipment requirements.
Both products feature a straight, three-pole M8 male connector and free wire ends. The WAGO 756-5111/030-050 has a 5 m cable length, while the 756-5111/030-015 has a 1.5 m cable length.
Both products are 5 m, three-pole M8 sensor/actuator cables with free wire ends. The WAGO 756-5111/030-050 features a straight M8 male plug, while the 756-5112/030-050 features a right-angled M8 male plug.
WAGO industrial connectivity products support dependable electrical connections in factory automation, machine building and distributed control installations. The WAGO 756-5111/030-050 combines a straight three-pole M8 male plug, a durable 5 m PUR cable and free wire ends to provide a flexible connection solution for compatible industrial sensors and actuators.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.