Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.46
The WAGO 756-5111/030-015 is a 1.5 m, 3-pole M8 sensor/actuator cable designed for dependable signal and power connections in industrial automation systems. Featuring a straight M8 male plug at one end and free wire ends at the other, this pre-assembled cable provides a practical connection between compatible field devices and electrical terminals.
Designed for industrial sensor and actuator installations, the WAGO 756-5111/030-015 supports an operating voltage of 60 V AC/DC and an operating current of 4 A. Its IP67-rated connector provides protection against dust and water ingress when correctly mated, making it suitable for demanding machine-building and factory automation environments.
The cable features a black polyurethane (PUR) outer sheath, halogen-free construction and an unshielded three-conductor arrangement. It offers good resistance to oils, chemicals, microbial influences, hydrolysis and UV radiation. Its drag-chain-compatible design also makes it suitable for appropriately specified moving machinery applications.
The WAGO 756-5111/030-015 provides a convenient connection between compatible industrial sensors or actuators and control equipment. Its straight, three-pole M8 male plug connects to a suitable M8 female interface, while the free wire ends allow the conductors to be terminated into an appropriate electrical connection.
The cable uses a conventional three-wire conductor arrangement, with brown for positive supply, blue for negative supply and black for signal. This configuration is commonly used for industrial sensors, although the pin assignment and electrical requirements of the connected device must always be checked before wiring.
The PUR outer sheath offers good resistance to oils, chemicals, microbial influences, hydrolysis and UV radiation. Combined with the cable's drag-chain-compatible construction, this makes it suitable for demanding industrial machinery and moving automation applications when the manufacturer's specified bending radius, travel speed and mechanical limits are observed.
When correctly mated, the IP67-rated M8 connector provides dust-tight protection and resistance to temporary immersion under specified test conditions. The free wire ends must be terminated and protected appropriately to maintain the required level of protection for the complete installation.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Other |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Cable length | 1.5 m |
| Material of contact surface | Other |
| Rated voltage | 60 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5111/030-015 |
| Product category | Industrial sensor/actuator cables |
| Product designation | Sensor/actuator cable; M8 plug; straight; 3-pole; length 1.5 m |
| Product type | Pre-assembled sensor/actuator cable with free wire ends |
| Product series | WAGO 756 Series |
| Connection type | M8 plug to free wire ends |
| Connector type | M8 male plug |
| Connector orientation | Straight, 0° |
| Conductor cross-section | 0.25 mm² |
| Cable diameter | 4.1 mm ± 0.2 mm |
| Operating voltage | 60 V AC/DC |
| Operating current | 4 A |
| Rated surge voltage | 1.5 kV |
| Insulation resistance | > 109 Ω |
| Contact resistance | 10 mΩ |
| Conductor resistance | ≤ 60 Ω/km |
| Pollution degree | 3 according to VDE 0110 |
| Protection rating | IP67 when correctly mated |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Black |
| Shielding | Unshielded |
| Halogen-free | Yes |
| Drag-chain compatible | Yes |
| Minimum bending radius | 10 × cable diameter |
| Specified bending cycles | 2 million |
| Drag-chain acceleration | Minimum 5 m/s² as stated in manufacturer data |
| Maximum travel speed | 3.33 m/s |
| Maximum horizontal travel path | 5 m |
| Maximum vertical travel path | 2 m |
| Torsional capacity | 180°/m |
| Static operating temperature | −50 to +90 °C |
| Dynamic operating temperature | −25 to +90 °C |
| Oil resistance | Good |
| Chemical resistance | Good |
| Microbial resistance | Good |
| Hydrolysis resistance | Good |
| UV resistance | Good |
| Cable approval | UL listed cable |
| Pin 1 conductor | Brown, positive supply (+) |
| Pin 3 conductor | Blue, negative supply (−) |
| Pin 4 conductor | Black, signal (S) |
| Assembly configuration | Factory-assembled straight M8 male plug with free wire ends |
The WAGO 756-5111/030-015 is a 1.5 m, three-pole M8 sensor/actuator cable used to connect compatible industrial sensors and actuators to electrical terminals and automation equipment.
The cable has a fixed length of 1.5 m, making it suitable for short connections between field devices and nearby control equipment.
The cable features a straight, three-pole M8 male plug at one end and free wire ends at the opposite end.
No. The WAGO 756-5111/030-015 has a factory-assembled M8 male plug at one end and unterminated conductors at the other, allowing connection to suitable terminals.
The cable supports an operating voltage of 60 V AC/DC and an operating current of 4 A, subject to the ratings of the complete installation and connected equipment.
The three-pole cable uses pin 1 with a brown conductor for positive supply, pin 3 with a blue conductor for negative supply and pin 4 with a black conductor for signal. The connected device's wiring requirements must be checked before installation.
The cable uses conductors with a cross-sectional area of 0.25 mm².
The cable has a nominal outer diameter of 4.1 mm ± 0.2 mm.
The M8 connector has an IP67 protection rating when correctly mated. The free wire end must be terminated in a suitably protected connection arrangement.
No. The WAGO 756-5111/030-015 is an unshielded sensor/actuator cable intended for compatible industrial control connections.
The cable features a black polyurethane (PUR) outer sheath with halogen-free construction and good resistance to oils, chemicals, hydrolysis, microbial influences and UV radiation.
Yes. The cable is drag-chain compatible and is specified for up to 2 million bending cycles under the manufacturer's defined conditions. Its minimum specified bending radius is 10 times the cable diameter.
The specified operating temperature range is −50 to +90 °C for static applications and −25 to +90 °C for dynamic applications.
Yes. The cable can be used to connect a compatible three-wire sensor or actuator to a PLC input or other suitable control interface, provided the connector pinout and electrical ratings match the equipment requirements.
Both products are 1.5 m, three-pole M8 sensor/actuator cables with free wire ends. The WAGO 756-5111/030-015 features a straight M8 male plug, while the 756-5112/030-015 features a right-angled M8 male plug.
WAGO industrial connectivity products are designed to support dependable electrical connections in factory automation, machinery and distributed control installations. The WAGO 756-5111/030-015 combines a straight three-pole M8 male plug, a flexible 1.5 m PUR cable and free wire ends to provide a practical connection solution for compatible industrial sensors and actuators.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.