Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£57.58
The WAGO 756-3504/050-050 is a 5 m, 5-pole M12 L-coded industrial power cable designed for dependable electrical connections in decentralised automation systems, industrial machinery and field-mounted equipment. Featuring a 90° angled M12 L-coded male plug at one end and free, unterminated conductors at the other, this factory-assembled cable provides a practical connection between compatible automation equipment and industrial DC power distribution systems.
Part of the WAGO 756 Series industrial connectivity range, the cable is designed as a power connection accessory for the WAGO I/O System Field. Its angled connector supports space-efficient installation around machinery and field-mounted devices, while the 5 m cable length provides flexible routing between decentralised equipment and associated power distribution points.
The WAGO 756-3504/050-050 combines a 63 V rated voltage, 16 A rated current, IP68 connector protection when correctly mated and a durable grey polyurethane (PUR) outer sheath. Its 5 × 1.5 mm² conductor configuration, halogen-free construction and drag chain suitability make it an effective choice for demanding industrial installations.
The WAGO 756-3504/050-050 provides a dependable connection solution for industrial automation systems requiring efficient power distribution. Its M12 L-coded male plug is designed for compatible industrial power interfaces, making it suitable for decentralised equipment where compact electrical connections are important.
The 90° angled connector is particularly beneficial in machinery installations where the available space around a connection point is limited. By directing the cable away from the mating interface at a right angle, the connector helps accommodate routing around machine frames, equipment housings and mounting plates.
The cable's free, unterminated conductors allow connection to suitable terminal blocks or electrical distribution equipment. This arrangement provides installation flexibility while retaining the convenience of a factory-fitted M12 connector.
With a nominal length of 5 m, the cable provides greater installation flexibility than shorter variants in the same product family. It is suitable for connections between field-mounted automation equipment and power distribution points located elsewhere on the machine or production line.
The grey PUR outer sheath provides mechanical durability and flexibility for industrial use. The cable is designed with good resistance to oils, chemicals, microbes and hydrolysis, together with good weathering characteristics and low-temperature flexibility. Its halogen-free, PVC-free and silicone-free construction further supports use in demanding machinery environments.
For moving machinery applications, the cable is specified as drag chain compatible, with a documented endurance of 10 million bending cycles under defined test conditions. WAGO specifies a minimum bending radius greater than 4 × cable diameter for fixed installations and greater than 7.5 × cable diameter for flexible installations. These requirements should be considered when planning cable routes and energy chain layouts.
The IP68-rated connector provides environmental protection when correctly mated with compatible equipment. The free cable end must be terminated within an appropriately protected enclosure or connection system, with suitable strain relief and electrical protection.
For dependable electrical operation, engineers should verify the 63 V rated voltage, 16 A rated current, M12 L-coded pin assignment and conductor termination requirements. The 5 m cable length should also be considered when assessing voltage drop and supply performance.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 16 A |
| Cable length | 5 m |
| Material of contact surface | Nickel/gold |
| Rated voltage | 63 V |
| Degree of protection (IP) | IP68 |
| Type of plug-in contact, field sided | Male (plug) |
| Continuity resistance | 5 mOhm |
| Permitted cable outer temperature after assembling without vibration | -40 – 90 °C |
| Material contact body | CuZn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Grey |
| Permitted cable outer temperature during assembling/handling | -30 – 90 °C |
| Manufacturer | WAGO |
| Series | WAGO 756 Series |
| Manufacturer part number | 756-3504/050-050 |
| Product designation | Power cable; M12L plug; angled; 5-pole; length 5 m |
| Product type | Industrial power connecting cable |
| Connector interface | M12 L-coded |
| Connector 1 | M12 male plug |
| Connector 2 | Free cable end |
| Connector orientation | Angled, 90° |
| Connection arrangement | Angled M12 L-coded male plug to free conductors |
| Rated current | 16 A |
| Contact resistance | 5 mΩ |
| Contact base material | Copper-zinc alloy (CuZn) |
| Contact plating | Nickel/gold |
| Connector housing material | Thermoplastic polyurethane (TPU) |
| Connector housing colour | Black |
| Connector tightening torque | 1 Nm |
| Protection rating | IP68 when correctly mated |
| Cable type code | LiF9YH-11Y-0B 5 × 1.5 mm² |
| Conductor configuration | 5 × 1.5 mm² |
| Conductor material | Bare copper |
| Conductor construction | 84 × 0.15 mm strands |
| Conductor insulation | PP9Y, halogen-free |
| Cable construction | Multicore round cable |
| Cable shielding | Unshielded |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Grey |
| Cable outer diameter | 9.6–10.2 mm |
| Halogen-free | Yes |
| PVC-free | Yes |
| Silicone-free | Yes |
| Operating temperature, fixed installation | −40 to +90 °C |
| Temperature during installation and handling | −30 to +90 °C |
| Drag chain suitability | Yes |
| Minimum bending radius, fixed installation | Greater than 4 × cable diameter |
| Minimum bending radius, flexible installation | Greater than 7.5 × cable diameter |
| Specified bending endurance | 10 million cycles |
| Microbial and hydrolysis resistance | Good |
| Weather resistance | Good to very good, including UV and ozone resistance |
| Chemical and oil resistance | Good |
| Weld-spatter resistance | Good |
| Country of origin | Germany |
| GTIN/EAN | 4055143982085 |
| UL approval | UL 2237, file E519600 |
| RoHS status | Compliant |
| Primary application | Industrial DC power distribution |
| Compatible product family | WAGO I/O System Field |
The WAGO 756-3504/050-050 is a 5 m M12 L-coded industrial power cable designed for connecting compatible decentralised automation equipment and industrial DC power distribution systems.
The cable has a nominal length of 5 m, providing flexible routing between field-mounted equipment and associated power distribution points.
The cable features a 90° angled, 5-pole M12 L-coded male plug at one end and free, unterminated conductors at the opposite end.
It is a male connector cable. The factory-fitted M12 L-coded plug has male contacts and is designed to mate with a compatible M12 L-coded female socket.
Both products feature a 90° angled, 5-pole M12 L-coded male plug and a free cable end. The 756-3504/050-020 is 2 m long, whereas the 756-3504/050-050 is 5 m long.
Both are 5 m, 5-pole M12 L-coded power cables with a male plug and free cable end. The 756-3503/050-050 has a straight plug, whereas the 756-3504/050-050 has a 90° angled plug.
No. It has a factory-fitted angled M12 L-coded male plug at one end and a free cable end at the other, allowing termination into compatible electrical equipment.
The WAGO 756-3504/050-050 has a rated voltage of 63 V. The connected equipment and complete electrical installation must remain within the applicable ratings.
The cable has a rated current of 16 A. The permissible circuit loading must also account for connected equipment, conductor termination, ambient conditions and protective devices.
The M12 L-coded connector provides IP68 protection when correctly mated with compatible equipment. The unterminated cable end must be installed in a suitably protected connection system.
The cable uses a 5 × 1.5 mm² conductor configuration with flexible copper conductors.
No. The WAGO 756-3504/050-050 is an unshielded multicore industrial power cable.
The cable has a grey polyurethane (PUR) outer sheath. It is halogen-free, silicone-free and PVC-free, with resistance characteristics suitable for demanding industrial environments.
Yes. The WAGO 756-3504/050-050 is drag chain compatible and has a specified endurance of 10 million bending cycles under defined test conditions. The manufacturer's bending radius and mechanical installation requirements must be followed.
Yes. The WAGO 756-3504/050-050 is part of the power cable accessory range for the WAGO I/O System Field. The specific device must provide a compatible M12 L-coded female power interface and matching electrical requirements.
WAGO industrial power cables provide dependable connectivity for decentralised automation and industrial machinery. The WAGO 756-3504/050-050 combines a space-saving 90° angled M12 L-coded male plug, 5 m grey PUR cable, 16 A current rating, IP68 connector protection and drag chain compatibility to support efficient installation, organised power distribution and reliable field-level equipment connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.