Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£82.67
The WAGO 756-3205/140-050 is a high-quality 5 m, 14-pole M16 sensor/actuator connecting cable designed for reliable electrical connections between industrial M8 sensor/actuator distribution boxes and automation control equipment. Part of the WAGO 756 industrial connectivity range, this pre-assembled cable features a straight M16 female socket at one end and free conductor ends at the other, providing a practical solution for distributed industrial field wiring.
Engineered for industrial automation environments, the WAGO 756-3205/140-050 combines a compact 14-pole M16 connector with durable black cable construction. The multipole connection enables several sensor and actuator circuits to be routed through a single cable assembly, reducing the need for individual cable runs between field-mounted distribution boxes and centralised control equipment. Its IP67-rated connector provides protection against dust and temporary water immersion when correctly mated.
With a 5 m cable length, 150 V operating voltage rating and current ratings of 4 A and 6 A depending on conductor cross-section, the WAGO 756-3205/140-050 supports reliable industrial power and signal connections. Its drag-chain-compatible construction, specified endurance of 2 million bending cycles and dynamic operating temperature range of −30 to +90 °C make it suitable for demanding machinery applications where flexible and dependable connectivity is required.
The WAGO 756-3205/140-050 is designed to connect compatible industrial M8 sensor/actuator distribution boxes to automation control equipment through a single multipole cable assembly. Sensor/actuator distribution boxes consolidate individual field-device connections, helping simplify machinery wiring and reduce the number of separate cables required between field equipment and control cabinets.
The cable features a straight, 14-pole M16 female socket at one end and free conductor ends at the other. This arrangement provides a convenient connection at the distribution box while allowing the individual conductors to be terminated into compatible control equipment. The straight connector orientation is suitable for installations where an inline cable exit is preferred and sufficient clearance is available.
The 14-pole M16 configuration supports multiple sensor and actuator circuits through one connection. The cable incorporates 0.34 mm² signal conductors and 0.75 mm² conductors for designated power connections. Its wiring arrangement includes internally bridged contacts, with pin M connected to pin A and pin U connected to pin L. Engineers should verify the connector pin assignment and the wiring requirements of the connected distribution box before installation.
With a 150 V operating voltage rating, a 4 A general current rating and a 6 A rating for the 0.75 mm² conductors, the WAGO 756-3205/140-050 supports appropriately rated industrial electrical circuits. The permissible current for each circuit depends on the assigned contact, conductor cross-section, connected equipment and installation conditions.
The cable is specified as drag-chain suitable, with a rated endurance of 2 million bending cycles under appropriate test and installation conditions. Its dynamic operating temperature range of −30 to +90 °C supports applications involving repeated cable movement. Suitable cable routing, mechanical support and bending conditions should be maintained to achieve reliable service life.
The IP67-rated M16 connector provides protection against dust and temporary water immersion when correctly mated with a compatible interface. The free conductor end does not independently provide IP67 protection and must be terminated within a suitably protected enclosure or connection system. With its 5 m cable length, the WAGO 756-3205/140-050 is particularly suitable for connecting nearby M8 sensor/actuator distribution boxes to industrial control equipment.
| Type of electrical connection, field-sided | Other |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 14 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Cable length | 5 m |
| Material of contact surface | Other |
| Rated voltage | 150 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Permitted cable outer temperature after assembling without vibration | -40 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -30 – 90 °C |
| Manufacturer | WAGO |
| Series | WAGO 756 |
| Manufacturer part number | 756-3205/140-050 |
| Product type | Industrial M16 sensor/actuator connecting cable |
| Application | Connection of compatible M8 sensor/actuator distribution boxes |
| Connector 1 | M16 female socket |
| Connector 2 | Free conductor ends |
| Connector orientation | Straight / 0° |
| Connection arrangement | Single-ended, M16 socket to free cable end |
| Operating voltage | 150 V |
| Operating current | 4 A |
| Operating current for 0.75 mm² conductors | 6 A |
| Rated surge voltage | 1.2 kV |
| Conductor cross-sections | 0.34 mm² and 0.75 mm², according to contact assignment |
| Conductor assignment | Pins A and L: 0.75 mm²; applicable signal contacts: 0.34 mm² |
| Pin A | Brown conductor |
| Pin C | White/pink conductor |
| Pin E | Black conductor |
| Pin G | Pink conductor |
| Pin J | Green conductor |
| Pin L | Blue conductor |
| Pin M | Bridged to pin A |
| Pin N | Pink/brown conductor |
| Pin O | Violet conductor |
| Pin P | White conductor |
| Pin R | Red conductor |
| Pin S | Grey conductor |
| Pin T | Yellow conductor |
| Pin U | Bridged to pin L |
| Cable outer diameter | 8.9–9.3 mm |
| Cable colour | Black |
| Cable type | Multicore round cable |
| Shielding | Unshielded |
| Protection rating | IP67, when correctly mated |
| Drag-chain compatibility | Yes |
| Rated bending cycles | 2 million |
| Operating temperature, dynamic | −30 to +90 °C |
| Weight | Approx. 601 g |
| Packaging quantity | 1 piece |
| Product group | I/O passive components and accessories |
| GTIN / EAN | 4044918978491 |
| Manufacturer product information | WAGO 756-3205/140-050 |
| Technical datasheet | WAGO 756-3205/140-050 Datasheet (PDF) |
The WAGO 756-3205/140-050 is a 5 m, 14-pole M16 sensor/actuator connecting cable designed to connect compatible industrial M8 sensor/actuator distribution boxes to automation control equipment. It features a straight M16 female socket at one end and free conductor ends at the other.
The cable is 5 m long and features a straight, 14-pole M16 female socket at one end. The opposite end consists of free conductors for termination into suitable control equipment or electrical connection hardware.
The WAGO 756-3205/140-050 has a 150 V operating voltage rating, a 4 A operating current rating and a 6 A current rating for 0.75 mm² conductors. Its rated surge voltage is 1.2 kV. Individual circuits must remain within the limits of their assigned contacts, conductors and connected equipment.
Yes. The WAGO 756-3205/140-050 is specified as drag-chain suitable, with a rated endurance of 2 million bending cycles and a dynamic operating temperature range of −30 to +90 °C. Its M16 connector provides IP67 protection when correctly mated, while the free conductor end requires suitable environmental protection.
The main difference is the M16 connector orientation. The WAGO 756-3205/140-050 features a straight, 14-pole M16 female socket, while the WAGO 756-3206/140-050 features a right-angled M16 female socket. Both have a 5 m cable length and free conductor ends for compatible M8 sensor/actuator distribution systems. The straight version is suitable for inline connections, while the angled version is useful where cable routing space is restricted.
WAGO industrial connectivity products are used by automation engineers, machine builders and system integrators to support dependable field wiring in industrial machinery and distributed control systems. The WAGO 756-3205/140-050 combines a practical 5 m cable length, straight 14-pole M16 female connector, free conductor ends, IP67 connector protection and drag-chain suitability to provide reliable connectivity for compatible M8 sensor/actuator distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.