Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£259.14
The WAGO 756-3203/190-250 is a 25 m, 19-pole M23 connecting cable designed for industrial sensor/actuator distribution systems. Featuring a straight M23 female socket at one end and a free cable end at the other, this factory-assembled cable provides a practical solution for connecting compatible field-mounted distribution boxes to control cabinets, terminal blocks and industrial automation equipment.
Part of the WAGO 756 Series, the cable combines a 19-contact M23 connector with a multicore, unshielded cable and a durable black polyurethane (PUR) outer sheath. Its extended 25 m length allows sensor and actuator signals and associated supply connections to be routed between equipment installed at different positions within a machine or production facility.
The cable is specified for operating voltages up to 300 V, with conductor-dependent current ratings of 8 A and 10 A. The correctly mated M23 connector provides IP67 protection, while the halogen-free PUR construction and drag-chain suitability support installation in demanding industrial environments.
The WAGO 756-3203/190-250 provides a multicore connection for compatible industrial sensor/actuator distribution boxes. These distribution systems allow multiple field devices to connect through local interfaces, with their wiring consolidated into a multipole cable leading towards the control system.
The cable's straight 19-pole M23 female socket is factory-fitted, helping simplify connection to compatible M23 interfaces. The opposite end consists of free conductors, allowing termination at suitable control cabinet terminals, junction boxes or other approved connection points.
The 19-pole arrangement supports multiple electrical circuits within one cable assembly. The conductor configuration includes different cross-sections for designated contacts, so the permissible current must be established for each connection rather than assuming that every conductor has the same rating.
For this cable family, WAGO specifies 8 A for designated contacts and 10 A for contacts associated with 1 mm² conductors. The complete installation must comply with the ratings of the distribution box, cable, connector and connected equipment.
The 25 m length makes the WAGO 756-3203/190-250 suitable for installations where sensor/actuator distribution boxes are located at a considerable distance from the associated control equipment.
Using a multicore connecting cable can simplify the routing of multiple circuits along machine frames, cable trays and protected industrial cable routes. It may also reduce the number of individual cables required between distributed field equipment and central control locations.
When installing a 25 m cable, particular attention should be given to voltage drop, conductor loading, electrical noise, cable support and mechanical protection. Because this version is unshielded, applications requiring screened signal transmission should use a cable specifically designed for that purpose.
The WAGO 756-3203/190-250 features a black polyurethane outer sheath suited to industrial cable installations. PUR construction provides useful mechanical durability and supports applications involving machinery, automation equipment and industrial field wiring.
The cable is specified as drag-chain suitable, making it an option for appropriately designed moving-machine installations. Correct cable guidance, bend radius, strain relief and avoidance of excessive torsion are important for reliable operation.
The M23 connector provides IP67 protection when correctly mated with a compatible counterpart. This rating applies to the properly assembled connector interface; the free cable end must be terminated within a suitable enclosure or otherwise protected according to the application's environmental requirements.
Its specified operating temperature range is −25 to +80 °C for moving applications and −40 to +90 °C for stationary installations.
| Type of electrical connection, field-sided | Other |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Positioning cable feed, box-sided | Other |
| Number of poles | 19 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 10 A |
| Cable length | 25 m |
| Material of contact surface | Nickel/gold |
| Rated voltage | 150 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 3 mOhm |
| Permitted cable outer temperature after assembling without vibration | -40 – 90 °C |
| Material contact body | CuZn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 80 °C |
| Manufacturer | WAGO |
| Product series | 756 |
| Part number | 756-3203/190-250 |
| Manufacturer designation | Connecting cable; 19-pole; length 25 m |
| Product category | Industrial sensor/actuator connecting cables |
| Product type | M23 multipole connecting cable |
| Connection type | M23 socket to free cable end |
| Connector 1 | M23 female socket |
| Connector 1 orientation | Straight, 0° |
| Connector 2 | Free cable end |
| Cable construction | Multicore |
| Cable shielding | Unshielded |
| Outer sheath material | Polyurethane (PUR) |
| Outer sheath colour | Black |
| Cable outer diameter | 11.3–11.9 mm |
| Operating voltage | ≤ 300 V |
| Operating current | 8 A for designated contacts |
| Operating current, 1 mm² conductors | 10 A |
| Rated surge voltage | ≥ 2.0 kV RMS |
| Contact resistance | 3 mΩ |
| Contact base material | Copper-zinc alloy (CuZn) |
| Contact surface | Nickel/gold |
| Connector protection rating | IP67 when correctly mated |
| Drag-chain suitability | Yes |
| Operating temperature, dynamic | −25 to +80 °C |
| Operating temperature, static | −40 to +90 °C |
| Halogen-free | Yes |
| Country of origin | Germany |
| GTIN | 4045454192914 |
The WAGO 756-3203/190-250 is a 25 m, 19-pole M23 connecting cable used to connect compatible industrial sensor/actuator distribution boxes to control systems and other industrial equipment.
The cable has a manufactured length of 25 m, making it suitable for extended industrial cable routes.
The cable features a straight, 19-pole M23 female socket at one end and a free cable end at the other.
Yes. The cable has one factory-fitted M23 female socket and one free cable end for application-specific termination.
The cable has a 19-pole M23 connector, designed for compatible multipole industrial connection systems.
The cable is specified for operating voltages up to 300 V. Current ratings depend on the conductor and contact configuration, with 8 A for designated contacts and 10 A for contacts using 1 mm² conductors.
No. The WAGO 756-3203/190-250 has an unshielded multicore cable. Applications requiring screened connections should use an appropriately specified alternative.
Yes. The cable is specified as drag-chain suitable, provided the manufacturer's mechanical installation requirements are observed.
The M23 connector provides IP67 protection when correctly mated with a compatible counterpart. The free cable end requires separate environmental protection.
The specified operating temperature range is −25 to +80 °C for moving installations and −40 to +90 °C for stationary installations.
The main difference is cable length. The WAGO 756-3203/190-250 is 25 m long, while the 756-3203/190-150 is 15 m long. Both belong to the straight, 19-pole M23 female-to-free-end connecting cable family.
The WAGO 756-3203/190-250 combines a 25 m industrial multicore cable with a straight 19-pole M23 female connector and a free cable end. Its robust PUR construction, drag-chain suitability and IP67-rated mating interface make it a practical connection solution for compatible sensor/actuator distribution boxes and industrial automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.