Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£43.20
The WAGO 706-753/301-100 is a 16-pole industrial interface connection cable designed for reliable signal transmission between compatible automation modules and electronic control equipment. Part of the WAGO 706 Series system wiring range, this pre-assembled cable features 16-pole female connectors at both ends, manufactured to the DIN 41651 connector standard, providing a convenient connection solution for industrial control cabinets and automation installations.
With a cable length of 1 m, the WAGO 706-753/301-100 provides one-to-one signal transmission between its two 16-pole connectors. Its 0.14 mm² conductors are arranged within a LiYY multicore cable, with conductor identification according to DIN VDE 47100. The pre-assembled design helps simplify system wiring by eliminating the need to terminate each conductor individually at the cable ends.
The cable is rated for an operating voltage of up to 35 V DC and a maximum current of 1 A per wire. When more than 10 wires are used, the maximum permissible current is reduced to 0.7 A per wire. Designed for use with compatible interface equipment, including the WAGO 857-980 Interface Adapter, this cable provides an organised solution for industrial signal distribution, system interconnection and control panel assembly.
The WAGO 706-753/301-100 provides a practical method of connecting compatible industrial interface devices without requiring individual conductor termination at each connection point. Its 16-pole DIN 41651 female connectors allow the cable to mate with suitable male headers, while the pre-assembled multicore cable maintains a direct electrical connection between corresponding connector positions.
This one-to-one wiring arrangement is particularly useful in industrial automation systems where multiple low-voltage signals must be transferred between control modules, interface adapters and associated equipment. By using a standardised connector format, the cable helps simplify installation and makes it easier to disconnect or replace compatible components during maintenance.
The cable uses 0.14 mm² LiYY conductors with colour identification according to DIN VDE 47100. Its 1 m length is suitable for short interconnections within electrical control cabinets or between closely positioned devices. The unshielded construction should be considered when planning installations near sources of electrical interference, with cable routing and separation selected according to the signal requirements.
Electrical loading must remain within the manufacturer's specified limits. Although the cable supports up to 1 A per wire, this rating is reduced to 0.7 A per wire when more than 10 wires are used. The maximum operating voltage is 35 V DC. The WAGO 706-753/301-100 is also suitable for supported system wiring applications involving the WAGO 857-980 Interface Adapter, providing a convenient means of extending compatible interface connections.
| Type of electrical connection, field-sided | Other |
|---|---|
| Type of electrical connection, box-sided | Other |
| Positioning cable feed, box-sided | Other |
| Number of poles | 16 |
| Positioning cable feed, field-sided | Other |
| Rated current In | 1 A |
| Type of plug-in contact, box-sided | Female (bus) |
| Cable length | 1 m |
| Material of contact surface | Other |
| Degree of protection (IP) | Other |
| Type of plug-in contact, field sided | Female (bus) |
| Permitted cable outer temperature after assembling without vibration | -20 – 50 °C |
| Material contact body | Other |
| Material of cable sheath | Other |
| Colour cable sheath | Grey |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 70 °C |
| Manufacturer | WAGO |
| Series | 706 Series |
| Model | 706-753/301-100 |
| Product type | Industrial interface connection cable |
| Cable function | One-to-one signal transmission |
| Connector configuration | Female to female |
| Connector 1 | 16-pole female connector |
| Connector 2 | 16-pole female connector |
| Connector standard | DIN 41651 |
| Connector termination | Insulation displacement connection (IDC) |
| Number of connector positions | 16 per end |
| Connector arrangement | Two-row rectangular connector |
| Cable type | LiYY |
| Conductor cross-section | 0.14 mm² |
| Conductor identification | Colour coding according to DIN VDE 47100 |
| Operating voltage | ≤35 V DC |
| Maximum current per wire | 1 A |
| Maximum current when more than 10 wires are used | 0.7 A per wire |
| Shielding | Unshielded |
| Compatible interface adapter | WAGO 857-980 |
| Application | Industrial interface and system wiring |
| GTIN / EAN | 4050821038856 |
| Country of origin | France |
The WAGO 706-753/301-100 is a 16-pole industrial interface connection cable designed to transmit signals directly between compatible DIN 41651 connectors. It is suitable for industrial automation, control cabinet wiring and supported system wiring applications involving the WAGO 857-980 Interface Adapter.
The cable has a 16-pole female connector at each end, manufactured according to DIN 41651. The connectors use a two-row rectangular arrangement and are intended to mate with compatible male connectors.
The WAGO 706-753/301-100 has a cable length of 1 m and uses 0.14 mm² conductors. It is constructed as a LiYY multicore cable with conductor colour coding according to DIN VDE 47100.
The maximum operating voltage is 35 V DC, and the maximum current is 1 A per wire. When more than 10 wires are used, the maximum permissible current must be reduced to 0.7 A per wire, in accordance with WAGO's technical guidance.
Yes. WAGO identifies the 706-753/301-100 as suitable for system wiring when used with the WAGO 857-980 Interface Adapter. The cable provides one-to-one signal transmission between its 16-pole connectors, subject to the electrical ratings and connector compatibility of the complete installation.
WAGO 706 Series connection cables provide a practical approach to industrial system wiring by combining standardised connectors with pre-assembled multicore cables. The WAGO 706-753/301-100 offers dependable one-to-one signal connections, a compact 1 m cable length and compatibility with supported WAGO interface equipment, helping simplify installation, maintenance and signal interconnection in industrial automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.