Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£43.16
The WAGO 706-753/300-200 is a 2 m, 14-pole industrial interface connection cable designed to provide reliable signal transmission between compatible automation devices and interface adapters. Featuring a 14-pole DIN 41651 female connector at each end, this pre-assembled cable provides a convenient plug-in connection for industrial control systems, helping reduce manual wiring and simplify electrical cabinet installation.
As part of the WAGO 706 Series connection cable range, the 706-753/300-200 is designed for one-to-one signal transmission between its two connectors. Its 0.14 mm² conductors and factory-assembled connector terminations provide an organised alternative to individually wiring multiple signal connections. The cable is particularly suitable for use with compatible WAGO JUMPFLEX interface adapters 857-981 and 857-982.
The cable supports an operating voltage of up to 35 V DC and a maximum current of 1 A per conductor, subject to the manufacturer's loading requirements. When more than ten conductors are loaded, the maximum current must be reduced to 0.7 A per conductor. With its 2 m length, unshielded multicore construction and matching 14-pole connectors, the WAGO 706-753/300-200 is a practical choice for industrial signal interfacing and control cabinet system wiring.
The WAGO 706-753/300-200 is designed to transmit electrical signals directly between corresponding positions on two 14-pole DIN 41651 connectors. This one-to-one connection arrangement makes it particularly useful for industrial interface applications where matching connector pin assignments are required. By using a factory-assembled cable, installers can avoid manually terminating individual conductors and create an organised connection between compatible modules.
The cable is particularly suited to system wiring arrangements incorporating WAGO JUMPFLEX interface adapters 857-981 and 857-982. These adapters provide an interface between compatible automation equipment and industrial control circuits. The WAGO 706-753/300-200 functions as a passive connection cable and does not provide signal conversion, amplification or electrical isolation. Correct operation therefore depends on the connected equipment, connector pin assignments and adherence to the specified voltage and current limits.
| Type of electrical connection, field-sided | Other |
|---|---|
| Type of electrical connection, box-sided | Other |
| Positioning cable feed, box-sided | Other |
| Number of poles | 14 |
| Positioning cable feed, field-sided | Other |
| Rated current In | 1 A |
| Type of plug-in contact, box-sided | Female (bus) |
| Cable length | 2 m |
| Material of contact surface | Other |
| Degree of protection (IP) | Other |
| Type of plug-in contact, field sided | Female (bus) |
| Permitted cable outer temperature after assembling without vibration | -20 – 50 °C |
| Material contact body | Other |
| Material of cable sheath | Other |
| Colour cable sheath | Grey |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 70 °C |
| Manufacturer | WAGO |
| Series | 706 Series |
| Manufacturer part number | 706-753/300-200 |
| Product type | Industrial interface connection cable |
| Cable function | One-to-one signal transmission |
| Connection 1 | 14-pole DIN 41651 female connector |
| Connection 2 | 14-pole DIN 41651 female connector |
| Connector configuration | Female to female |
| Connector arrangement | Two-row rectangular connector |
| Connector termination | Insulation displacement connection (IDC) |
| Number of connector positions | 14 per connector |
| Number of conductors | 14 |
| Conductor cross-section | 0.14 mm² |
| Cable type | LiYY |
| Conductor colour coding | DIN VDE 47100 |
| Maximum operating voltage | 35 V DC |
| Maximum current per conductor | 1 A |
| Maximum current per conductor with more than 10 loaded conductors | 0.7 A |
| Shielding | Unshielded |
| Operating temperature | −25 to +70 °C |
| Degree of protection | IP20 |
| Compatible WAGO interface adapters | 857-981 and 857-982 |
| RoHS status | RoHS 3 compliant |
| Packaging unit | 1 piece |
The WAGO 706-753/300-200 is a 14-pole industrial interface connection cable designed for one-to-one signal transmission between compatible DIN 41651 connectors. It is commonly used for system wiring with suitable WAGO JUMPFLEX interface adapters and industrial automation equipment.
The cable features a 14-pole DIN 41651 female connector at each end. Both connectors are factory assembled, providing a socket-to-socket connection between compatible male interface connectors.
The WAGO 706-753/300-200 has a nominal cable length of 2 m. It uses 0.14 mm² conductors and is intended for organised low-voltage signal wiring in industrial control systems.
The cable supports a maximum operating voltage of 35 V DC and a maximum current of 1 A per conductor. When more than ten conductors are loaded, the maximum current must be reduced to 0.7 A per conductor, according to WAGO's specifications.
The WAGO 706-753/300-200 is suitable for system wiring with WAGO JUMPFLEX interface adapters 857-981 and 857-982. The connector arrangement, pin assignment and electrical ratings should be checked to ensure compatibility with the complete installation.
WAGO 706 Series connection cables provide industrial automation engineers, electrical panel builders and OEM manufacturers with dependable, pre-assembled signal wiring solutions. The WAGO 706-753/300-200 combines two 14-pole DIN 41651 female connectors, one-to-one signal transmission and a practical 2-metre cable length to support efficient connections between compatible industrial interface modules and automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.