Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£72.78
The WAGO 706-100/1300-200 is a 20-pole industrial connection cable designed for efficient signal wiring between compatible automation equipment and electrical interface modules. Featuring a 20-pole DIN 41651 female connector at one end and open-ended conductors at the other, this cable provides a practical solution for connecting system wiring interfaces to individually terminated control circuits.
With a standard length of 2 m, the cable provides flexibility when arranging connections inside industrial control cabinets. Its LiYY multicore cable construction incorporates conductors with a cross-sectional area of 0.14 mm², using conductor colour identification in accordance with DIN VDE 47100. This arrangement helps installers identify individual conductors and organise connections during assembly, commissioning and maintenance.
The WAGO 706-100/1300-200 is particularly useful for PLC system wiring, industrial interface modules and control cabinet signal distribution. Its pre-terminated connector helps reduce manual connector assembly, while the free cable end allows the individual conductors to be connected according to the requirements of the installation. The cable is intended for compatible low-voltage signal circuits and supports a maximum operating voltage of 35 V AC/DC, subject to the manufacturer's electrical ratings.
The WAGO 706-100/1300-200 provides a convenient way to connect equipment featuring a compatible 20-pole DIN 41651 male connector to individually wired control circuits. Its factory-fitted female connector provides a defined system-side connection, while the open-ended conductors allow installers to select suitable terminal blocks or other approved termination methods for the application. This is particularly beneficial in control cabinets where a standard connector interface must be adapted to a specific field wiring arrangement.
The cable is a passive electrical connection assembly; it does not perform signal conversion, isolation, amplification or digital input/output processing. Its suitability depends on the mating connector, pin assignment, voltage, conductor loading and environmental conditions of the installation. For reliable operation, installers should verify the required wiring diagram and observe the applicable current derating when more than ten conductors are loaded.
| Type of electrical connection, field-sided | Other |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 20 |
| Positioning cable feed, field-sided | Other |
| Rated current In | 1 A |
| Cable length | 2 m |
| Material of contact surface | Other |
| Degree of protection (IP) | Other |
| Type of plug-in contact, field sided | Female (bus) |
| Permitted cable outer temperature after assembling without vibration | -20 – 50 °C |
| Material contact body | Other |
| Material of cable sheath | Other |
| Colour cable sheath | Grey |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 70 °C |
| Manufacturer | WAGO |
| Series | 706 Series |
| Model | 706-100/1300-200 |
| Product type | Industrial connection cable |
| Cable function | System wiring and signal connection |
| Connection 1 | DIN 41651 female pluggable connector |
| Connection 1 pole count | 20 |
| Connection 2 | Open-ended conductors |
| Number of conductors | 20 |
| Cable type | LiYY |
| Conductor cross-section | 0.14 mm² |
| Conductor colour coding | DIN VDE 47100 |
| Maximum operating voltage | 35 V AC/DC |
| Maximum current per conductor | 1 A |
| Current per conductor when more than 10 conductors are loaded | 0.7 A |
| Shielding | Unshielded |
| Operating temperature | −20 to +50 °C |
| Weight | approx. 176.6 g |
| Component recognition | UR components |
| Country of origin | France |
| GTIN / EAN | 4050821452393 |
| Packaging unit | 1 piece |
The WAGO 706-100/1300-200 is a 20-pole industrial connection cable used to connect compatible DIN 41651 system wiring interfaces to individual conductors. It is suitable for PLC wiring, industrial interface modules and control cabinet signal connections.
The cable has a 20-pole DIN 41651 female connector at one end and open-ended conductors at the other. The female connector mates with a compatible 20-pole male connector, while the free conductors can be terminated according to the installation requirements.
The WAGO 706-100/1300-200 has a nominal cable length of 2 m. It uses 0.14 mm² LiYY conductors with colour coding according to DIN VDE 47100.
The cable supports a maximum operating voltage of 35 V AC/DC and a maximum current of 1 A per conductor. When more than ten conductors are loaded, the manufacturer's reduced current limit of 0.7 A per conductor applies.
Yes. The cable can be used with compatible WAGO interface modules featuring a 20-pole DIN 41651 male connector, including suitable modules from the WAGO 704 Series. The connector arrangement, pin assignment and electrical ratings must be checked before installation.
WAGO industrial system wiring products help control panel builders, automation engineers and machine manufacturers establish organised and dependable electrical connections. The WAGO 706-100/1300-200 combines a pre-terminated 20-pole DIN 41651 female connector, a practical 2-metre cable length and individually accessible conductors to provide a flexible solution for industrial signal wiring and control cabinet integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.