pd32cnp25ppm5t - photo prr 3m pnp no/nc, plg

pd32cnp25ppm5t – photo prr 3m pnp no/nc, plg

Carlo Gavazzi PD32CNP25PPM5T is a polarised retro-reflective photoelectric sensor with a rated sensing distance up to 2.5 m, 10–30 V DC supply, preset PNP output with programmable NO/NC switching, 660 nm red light, Teach-In adjustment, M8 connection and IP67 protection.

SKU: PD32CNP25PPM5TMPN: PD32CNP25PPM5T
This product has been discontinued A direct replacement is available below.
PD30CNP06PPM5RT - Polarized Retro Reflective Replacement product 55764 SKU: PD30CNP06PPM5RT View

Why Choose the Carlo Gavazzi PD32CNP25PPM5T Polarised Retro-Reflective Photoelectric Sensor?

The Carlo Gavazzi PD32CNP25PPM5T is a miniature polarised retro-reflective photoelectric sensor designed for accurate object detection in industrial automation and machinery. Part of the Carlo Gavazzi PD32 series, it combines a compact 12 × 32 × 20 mm reinforced PMMA/ABS housing with a preset PNP output, programmable NO/NC switching and an M8 plug connection.

The sensor provides a rated operating distance of up to 2.5 m when used with the specified reflector and uses 660 nm polarised modulated red light. Its polarised retro-reflective sensing principle helps distinguish the intended reflector from unwanted reflections produced by shiny targets, while Teach-In programming allows sensitivity to be configured for the application.

Operating from a 10–30 V DC supply, the PD32CNP25PPM5T provides a PNP output with programmable NO/NC switching and an M8 connector for convenient installation. A 1,000 Hz operating frequency, fast ≤0.5 ms response time and comprehensive electrical protection make it suitable for conveyors, packaging machinery, assembly systems and automated material handling equipment.

Key Advantages

  • Polarised retro-reflective sensing distance up to 2.5 m with the specified reflector.
  • 660 nm polarised red light helps improve detection reliability with shiny and reflective targets.
  • PNP output with programmable NO/NC switching provides flexible control system integration.
  • Teach-In sensitivity adjustment simplifies application-specific configuration.
  • 10–30 V DC operating voltage suits standard industrial automation systems.
  • 1,000 Hz operating frequency supports responsive object detection.
  • M8 plug connection supports convenient installation and replacement.
  • IP67 protection supports operation in demanding industrial environments.

Key Features

  • Carlo Gavazzi PD32 photoelectric sensor series.
  • Polarised retro-reflective photoelectric sensing principle.
  • Rated operating distance up to 2.5 m with reflector.
  • 660 nm polarised modulated red LED.
  • PNP transistor output.
  • Programmable normally open or normally closed switching function.
  • Teach-In sensitivity adjustment by push button or external wire.
  • 10–30 V DC rated operational voltage.
  • 1,000 Hz operating frequency.
  • Response time ≤0.5 ms.
  • Continuous output current up to 100 mA.
  • M8 connector electrical connection.
  • Yellow output LED and green stability/power LED.
  • Short-circuit, reverse polarity and transient protection.
  • IP67 degree of protection.

Reliable Polarised Retro-Reflective Detection for Industrial Automation

Polarised retro-reflective photoelectric sensors transmit light towards a reflector installed opposite the sensor and monitor the returned beam. An object is detected when it interrupts this optical path. Polarisation allows the sensor to distinguish light returned by the intended reflector from reflections generated by shiny objects, helping to provide dependable detection in applications involving reflective products and surfaces.

The PD32CNP25PPM5T combines this sensing principle with a rated distance of up to 2.5 m, 660 nm red light and Teach-In sensitivity adjustment. Its 1,000 Hz operating frequency, programmable NO/NC PNP output and miniature housing make it well suited to precise sensing in compact automated machinery. A suitable reflector is required to complete the sensing arrangement and is normally ordered separately.

Typical Applications

  • Industrial conveyors and material handling systems.
  • Packaging and production machinery.
  • Object presence and position detection.
  • Detection of shiny or reflective products.
  • Product counting on automated production lines.
  • Automated assembly and handling equipment.
  • Compact machinery with restricted sensor mounting space.

Technical Specifications

Tick the specs you need, then view products that match.

Sensing Mode Retro-reflective
IP Rating IP67
Output Type PNP
Sensing Principle Photoelectric - retro-reflective
Sensing Distance 2500 mm
Output Function NO + NC
Connection M8 connector
Manufacturer Carlo Gavazzi
Series PD32
Model PD32CNP25PPM5T
Product type Polarised retro-reflective photoelectric sensor
Detection principle Polarised retro-reflective
Rated operating distance Up to 2.5 m with reflector
Reference reflector 51 × 51 mm ER5060
Blind zone 5 mm
Light source GaAlAs LED
Light type Polarised, modulated red light
Light wavelength 660 nm
Sensing angle ±2 °
Output Type PNP
Output function Programmable NO/NC switching
Rated operational voltage 10–30 V DC
Operating frequency 1,000 Hz
Response time ≤0.5 ms
Continuous output current ≤100 mA
Voltage drop ≤2.4 V DC at 100 mA
No-load supply current ≤25 mA at 24 V DC
OFF-state current ≤100 µA
Power-on delay ≤300 ms
Sensitivity adjustment Teach-In by push button or external wire
Connection type M8 plug
Housing material Reinforced PMMA/ABS
Housing dimensions 12 × 32 × 20 mm
Protection rating IP67
Operating temperature -25 to +60 °C
Indicators Yellow output LED and green stability/power LED
Protection Short-circuit, reverse polarity and transient protection
Approvals/marks CE, cUL
System requirement Suitable retro-reflector required and normally ordered separately

Frequently Asked Questions

What is the Carlo Gavazzi PD32CNP25PPM5T used for?

The PD32CNP25PPM5T is a polarised retro-reflective photoelectric sensor designed for non-contact object detection in industrial automation, conveyors, packaging equipment and assembly machinery.

What is the sensing distance of the PD32CNP25PPM5T?

The PD32CNP25PPM5T provides a rated operating distance of up to 2.5 m when correctly aligned with a suitable reflector, such as the specified 51 × 51 mm ER5060 reflector.

What output does the PD32CNP25PPM5T provide?

The PD32CNP25PPM5T has a preset PNP transistor output, with the normally open or normally closed switching function programmable during setup.

How is the PD32CNP25PPM5T configured and connected?

Sensitivity is adjustable using Teach-In programming by push button or external wire, while electrical connection is provided through an M8 plug.

Does the PD32CNP25PPM5T require a reflector?

Yes. The PD32CNP25PPM5T uses a polarised retro-reflective sensing principle and requires a suitable reflector positioned opposite the sensor. The reflector is normally ordered separately.

Trusted Industrial Sensing Technology

Carlo Gavazzi PD32 photoelectric sensors provide compact and dependable sensing for industrial automation, combining miniature construction, Teach-In configuration, robust IP67 protection and flexible switching functionality for integration into modern machinery.