MC88CH2OLA2 – SAFETY MAGNETIC SENSOR LEFT 2NO CABLE

Why Choose the Carlo Gavazzi MC88CH2OLA2 Safety Magnetic Sensor?

The Carlo Gavazzi MC88CH2OLA2 is a non-contact safety magnetic sensor designed for monitoring hinged, sliding and removable guards on industrial machinery. Part of the Carlo Gavazzi MC88C series, it uses magnetically operated dry reed contacts to monitor guard position without requiring direct mechanical contact between the sensor and actuator.

This model features a left-hand cable exit and 2NO output reed contacts, providing two normally open channels for integration with compatible safety monitoring equipment. The sensor provides a protected switch-on distance of 18 mm and protected switch-off distance of 30 mm, supporting installations where useful alignment tolerance is required between the sensor and magnetic actuator.

The MC88CH2OLA2 is supplied with an integral 2 m PVC cable and supports a maximum switching voltage of 12/24 V AC/DC, maximum switching current of 250 mA and maximum switching power of 6 W. Its compact rectangular glass-fibre reinforced thermoplastic housing, -25 to +80 °C operating temperature range and IP67 protection make it well suited to demanding industrial machine safety applications.

Key Advantages

• Non-contact magnetic guard sensing avoids the mechanical wear associated with physically actuated switches.
• 2NO dry reed contacts provide two switching channels for compatible safety monitoring systems.
• Left-hand cable exit supports machinery layouts requiring cable routing from the left side.
• Protected switching distances of 18 mm ON and 30 mm OFF provide useful installation tolerance.
• Integral 2 m PVC cable provides a ready-wired connection for machine installation.
• IP67 protection supports reliable use in dusty and damp industrial environments.

Key Features

• Carlo Gavazzi MC88C series safety magnetic sensor.
• Non-contact magnetic sensing principle.
• 2NO dry reed contact output.
• Left-hand cable exit.
• Integral 2 m PVC cable.
• Protected switch-on distance of 18 mm.
• Protected switch-off distance of 30 mm.
• Maximum switching voltage of 12/24 V AC/DC.
• Maximum switching current of 250 mA.
• Maximum switching power of 6 W.
• Potential-free switching contacts.
• Glass-fibre reinforced thermoplastic housing.
• IP67 protection rating.
• Operating temperature range of -25 to +80 °C.

Dual-Channel Non-Contact Guard Monitoring

The MC88CH2OLA2 monitors machine guard position using magnetic actuation rather than a mechanically operated key or plunger. When the associated magnetic actuator moves into or out of the sensor's operating range, its two normally open reed contacts change state, enabling compatible safety logic to monitor the position of the protective guard.

The MC88C range can be paired with MC88CM1, MC88CM2 or MC88CM3 magnetic actuators to provide different assured operating distances. The 18 mm switch-on and 30 mm switch-off distances specified for the MC88CH2OLA2 correspond to operation with the MC88CM3 actuator when the sensor and actuator are correctly aligned. When correctly incorporated with suitable safety logic, MC88C sensors can be used in applications up to Category 4.

Typical Applications

• Hinged machine guard monitoring.
• Sliding safety doors and gates.
• Removable machine protection panels.
• Packaging and processing machinery.
• Automated assembly and production equipment.
• Conveyor and material handling systems.
• Industrial machine safety and access monitoring systems.