Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Carlo Gavazzi MC88CH1O1CRT1 is an IP67 coded magnetic safety sensor with 1NO + 1NC dry reed contacts, right-hand exit and a 0.1 m PVC pigtail with M12 connector for non-contact industrial machine guard monitoring.
£46.98
The Carlo Gavazzi MC88CH1O1CRT1 is a robust coded magnetic safety sensor designed for non-contact monitoring of hinged, sliding and removable guards on industrial machinery. As part of the Carlo Gavazzi MC88C safety magnetic sensor series, this model features a right-hand cable exit, 1NO + 1NC dry reed contact outputs and a convenient pigtail connection with an M12 connector.
Designed for machine safety applications, the MC88CH1O1CRT1 works with the corresponding MC88CM magnetic actuator to monitor whether a movable guard is correctly positioned. Its non-contact magnetic operating principle eliminates mechanical contact between the sensor and actuator, helping reduce wear and providing reliable operation where dust, dirt and alignment tolerances can make conventional mechanical safety switches less suitable.
The MC88CH1O1CRT1 features a 0.1 m PVC pigtail with M12 connector and provides a 18 mm switch-on distance and 30 mm switch-off distance. Its reed contacts support a maximum switching voltage of 12/24 V AC/DC, maximum switching current of 250 mA and maximum switching power of 6 W. An IP67 protection rating and operating temperature range of -25 to +80 °C support dependable use in demanding industrial environments.
Coded magnetic safety sensors monitor movable machine guards by detecting a corresponding magnetic actuator without mechanical contact. When the guard is opened or displaced, the sensor contacts change state so that the associated safety control system can stop or disconnect hazardous machine movement. The non-contact design also helps provide a long service life because there is no mechanical actuator mechanism subject to repeated physical wear.
The Carlo Gavazzi MC88C series is particularly suited to industrial applications where generous operating tolerances are beneficial. The MC88CH1O1CRT1 uses the MC88CM3 actuator configuration to provide an 18 mm assured switching distance and 30 mm assured switch-off distance. When connected to appropriate safety logic, MC88C sensors can support safety gate systems up to Category 4, PL e according to EN ISO 13849-1.
Tick the specs you need, then view products that match.
| Sensing Distance | 18 mm | |
|---|---|---|
| IP Rating | IP67 | |
| Output Type | Relay | |
| Sensing Principle | Magnetic | |
| Connection | Cable with M12 connector | |
| Manufacturer | Carlo Gavazzi | |
| Series | MC88C | |
| Model | MC88CH1O1CRT1 | |
| Product type | Coded safety magnetic sensor | |
| Operating principle | Magnetic | |
| Output Type | Dry reed contacts | |
| Contact configuration | 1NO + 1NC | |
| Sensor exit | Right | |
| Switch-on distance | 18 mm | |
| Switch-off distance | 30 mm | |
| Maximum switching voltage | 12/24 V AC/DC | |
| Maximum switching current | 250 mA | |
| Maximum switching power | 6 W | |
| Connection type | Pigtail with M12 connector | |
| Pigtail cable | 0.1 m PVC | |
| Housing type | Rectangular | |
| Housing material | Glass-fibre reinforced PBT | |
| Dimensions (L × W × H) | 88 × 25 × 13 mm | |
| Protection rating | IP67 | |
| Operating temperature | -25 to +80 °C | |
| Weight | 85 g | |
| Safety capability | Up to Category 4, PL e with suitable safety logic | |
| Approvals | CE, cULus | |
| Compatible actuator | MC88CM3 | |
| Barcode | 5709870402505 |
The MC88CH1O1CRT1 is a coded magnetic safety sensor designed for non-contact monitoring of hinged, sliding and removable machine guards, safety doors and protective covers.
The sensor provides 1 normally open (NO) and 1 normally closed (NC) dry reed contact for integration with compatible machine safety control circuitry.
The MC88CH1O1CRT1 is supplied with a 0.1 m PVC pigtail terminating in an M12 connector, providing convenient connection and replacement in industrial machinery.
The MC88CH1O1CRT1 provides an 18 mm switch-on distance and a 30 mm switch-off distance when correctly aligned with its corresponding MC88CM3 magnetic actuator.
When correctly integrated with suitable safety logic, the MC88C safety magnetic sensor system can be used in safety gate applications up to Category 4, PL e according to EN ISO 13849-1.
Carlo Gavazzi MC88C coded magnetic safety sensors provide dependable non-contact guard monitoring for industrial machinery, combining generous operating tolerances, robust environmental protection and flexible connectivity for modern machine safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.