Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 18.71.8.230.0002 is an anthracite grey Series 18 indoor wall-mounted PIR motion detector with a 230 V AC supply, 10 A normally open contact, 110-degree detection angle, automatic timing and IP40 protection for lighting automation.
£25.00
The Finder 18.71.8.230.0002 is a 230 V AC passive infrared (PIR) motion detector from the Finder Series 18 range, designed for automatic lighting control in residential, commercial and building automation applications. By detecting changes in infrared radiation associated with movement, the device can activate connected lighting without requiring manual operation of a wall switch.
Part of Finder's dedicated movement and presence detector family, the Type 18.71 provides a practical solution for automatic lighting in areas where illumination is required primarily when people are present. Motion-activated operation can improve convenience and help reduce unnecessary lighting energy consumption.
The Finder 18.71.8.230.0002 is suitable for integration into appropriately designed mains-powered lighting installations. Its automatic detection principle makes it useful in circulation areas, entrances, corridors and other spaces where reliable, hands-free lighting control is desirable.
Passive infrared motion detectors monitor changes in infrared radiation within their detection area. When a person moves through the monitored zone, the detector can respond by activating its connected lighting circuit, subject to the device's operating settings and installation conditions.
The Finder 18.71.8.230.0002 belongs to the Series 18 family of movement and presence detectors. It is intended for applications where automatic lighting control can improve convenience, particularly in areas used intermittently throughout the day.
Motion-controlled lighting is commonly used in corridors, entrances, utility areas and other circulation spaces. In these environments, automatic activation can help ensure that lighting is available when required while reducing the likelihood that lamps remain switched on unnecessarily.
Correct positioning is important for dependable PIR detection. The detector should be installed according to Finder's instructions, with consideration given to the monitored area, movement direction, surrounding temperature conditions and possible sources of unwanted activation. The connected lighting load must also remain within the manufacturer's specified switching limits.
The 230 V AC supply designation identifies this model as a mains-powered device. Installation, wiring and maintenance should be performed by a competent person with the relevant circuits safely isolated.
| Manufacturer | Finder |
|---|---|
| Series | Series 18 |
| Type | 18.71 |
| Model | 18.71.8.230.0002 |
| Manufacturer part number | 18.71.8.230.0002 |
| Product type | PIR motion detector |
| Product category | Motion and Presence Detectors |
| Nominal supply voltage | 230 V AC |
| Supply frequency | 50/60 Hz |
| Detection technology | Passive infrared (PIR) |
| Primary function | Automatic lighting control based on movement detection |
| Associated application | Building lighting automation |
| Control principle | Motion-activated electrical switching |
The Finder 18.71.8.230.0002 is a PIR motion detector designed to provide automatic lighting control by detecting movement within its monitored area.
The Finder 18.71.8.230.0002 is designed for a nominal 230 V AC supply at mains frequency.
PIR stands for passive infrared. A PIR detector senses changes in infrared radiation caused by movement, allowing compatible lighting circuits to operate automatically.
Yes. Motion-controlled lighting can help reduce unnecessary energy consumption by activating lighting when movement is detected rather than relying exclusively on manual switching.
It may be used with compatible LED lighting installations, provided the connected load complies with the detector's specified output ratings and the LED driver's inrush characteristics are suitable.
The detector should be installed in a location that provides appropriate coverage of the intended movement area, following Finder's mounting, wiring and environmental requirements for the exact model.
Finder Series 18 motion and presence detectors support convenient, energy-conscious lighting automation across residential, commercial and building control applications. The Finder 18.71.8.230.0002 provides a 230 V AC PIR motion detection solution for automatically operating compatible lighting circuits in spaces where hands-free control is beneficial.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.