Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato NG 2D6D412V-F30 is an NG series RFID safety switch with guard locking, three integrated control devices, dual electronic safety outputs and a VN NG-F30 low-level coded actuator for industrial machine guarding.
£546.54
The Pizzato NG 2D6D412V-F30 is an advanced NG series safety switch with guard locking and integrated control devices, supplied complete with the VN NG-F30 universal actuator. Designed for industrial machine guarding, it combines RFID-based guard monitoring, solenoid-operated locking and local operator controls in one robust assembly for safety-critical doors, gates and access points.
This configuration incorporates three integrated control devices: a white pushbutton with 1NO+1NC contacts, a blue pushbutton with 1NC+1NO contacts and a red emergency-stop pushbutton with rotational release and 2NC contacts. Bringing these operator functions together with the guard-locking switch provides a compact machine interface and can reduce the need for separate control stations around guarded equipment.
The NG 2D6D412V-F30 uses Principle D operation, meaning the actuator is locked when the solenoid is de-energised. It provides two safety inputs IS1-IS2 and two safety outputs OS1-OS2, with separate O3 and O4 signalling outputs for actuator-inserted and actuator-locked status. The supplied VN NG-F30 actuator has a low coding level, while the rotating head incorporates a lock auxiliary release device and escape pushbutton for controlled and emergency access.
Guard-locking safety switches are used where a protective door or gate must remain secured while hazardous machine conditions are present. The Pizzato NG series combines non-contact RFID actuator detection with electronic safety outputs and a robust mechanical locking system, allowing suitable safety-control equipment to monitor both guard position and locking status.
The NG 2D6D412V-F30 further simplifies machine-interface design by integrating two standard pushbuttons and an emergency-stop control directly into the guard-locking assembly. Its Mode 1 safety logic, dedicated status outputs, robust metal housing and auxiliary and escape-release functions make it particularly suitable for automated equipment requiring dependable access control and convenient local operation.
Tick the specs you need, then view products that match.
| Product Series | Pizzato NG | |
|---|---|---|
| Device Type | Guard-locking switch | |
| Voltage | 412 V | |
| IP Rating | IP65 | |
| Safety Switch Type | Guard locking (solenoid) | |
| Housing Material | Metal | |
| Manufacturer | Pizzato | |
| Series | NG | |
| Model | NG 2D6D412V-F30 | |
| Product type | Safety switch with guard locking and integrated control devices | |
| Actuator | VN NG-F30 universal actuator | |
| Actuator coding level | Low | |
| Actuator detection | RFID | |
| Maximum actuator holding force | 9,750 N | |
| Nominal operating voltage | 24 V DC | |
| Working method | Principle D – actuator locked with de-energised solenoid | |
| Cover configuration | 3 devices | |
| Position 1 | White pushbutton, 1NO+1NC | |
| Position 2 | Blue pushbutton, 1NC+1NO | |
| Position 3 | Red emergency-stop pushbutton, turn-to-release, 2NC | |
| Safety inputs | 2 × IS1-IS2 | |
| Safety outputs | 2 × OS1-OS2 | |
| Signalling output O3 | Actuator inserted | |
| Signalling output O4 | Actuator locked | |
| Solenoid activation inputs | I4 or IE1-IE2 | |
| Programming / reset input | I3 | |
| Safety output activation | Mode 1 – outputs active with actuator inserted and locked | |
| Housing | Metal | |
| Cable entries | 3 × M20×1.5 threaded conduit entries | |
| Head | Rotating head with lock auxiliary release device and escape pushbutton | |
| Protection rating | IP65 according to EN 60529 | |
| Operating temperature | -25 to +55 °C | |
| Mechanical durability | 1,000,000 operating cycles | |
| Connection type | Without connector | |
| HS Code | 85369095 |
The Pizzato NG 2D6D412V-F30 is designed to monitor and lock movable machine guards while providing integrated local operator and emergency-stop controls for industrial machinery and automated equipment.
The switch incorporates a white 1NO+1NC pushbutton, a blue 1NC+1NO pushbutton and a red turn-to-release emergency-stop pushbutton with 2NC contacts.
The switch is supplied complete with the VN NG-F30 universal actuator, which uses a low RFID coding level.
The NG 2D6D412V-F30 uses Principle D, so the actuator is locked when the solenoid is de-energised. Its Mode 1 configuration activates the safety outputs when the actuator is both inserted and locked.
The switch provides two safety inputs IS1-IS2 and two safety outputs OS1-OS2, together with O3 and O4 signalling outputs for actuator-inserted and actuator-locked status.
Pizzato NG series safety switches combine RFID-coded guard monitoring, robust locking and integrated operator-control functionality to provide dependable access protection for machine builders, automation engineers and modern industrial production systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.