Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato FY60PD7E0A FY series safety interlock switch with separate actuator and guard lock, featuring 24 V AC/DC energised-solenoid locking, 1NC actuator-operated contact, 3NC solenoid-operated contacts, escape release and two green status LEDs.
£117.33
The Pizzato FY60PD7E0A is an industrial safety interlock switch with separate actuator and guard locking designed for monitoring and controlling access to hazardous areas of machinery. Part of the Pizzato FY series safety switches, it combines mechanical guard interlocking with solenoid-controlled locking for automated machinery, production cells and industrial machine guarding systems.
The FY60PD7E0A uses the 60P slow-action contact block, providing 1NC contact operated by the actuator and 3NC contacts operated by the solenoid. This four-NC contact arrangement enables electrical monitoring of both guard position and locking mechanism status for integration with appropriately designed safety relays, safety PLCs and machine control systems.
This configuration uses the E operating principle, meaning the actuator is mechanically locked while the solenoid is energised. The switch operates from a 24 V AC/DC solenoid supply, incorporates an escape release button and features two green LEDs switched by the solenoid power supply. The FY60PD7E0A is supplied without an actuator, allowing a compatible Pizzato FY series actuator to be selected for the machine guard installation.
Safety switches with guard locking are used where controlled access to hazardous machinery forms part of the machine safety strategy. The Pizzato FY series combines a separate mechanical actuator with electrical guard and lock monitoring, allowing guard position and locking status to be incorporated into an appropriately designed industrial safety circuit.
The FY60PD7E0A uses the E operating principle, so the actuator is locked while the solenoid is energised and can be released when solenoid power is removed. This operating method should be selected where the machine risk assessment permits guard unlocking following loss of solenoid power. The integrated escape release button provides an additional means of releasing the locking mechanism from within a protected machine area where required by the safety design.
Tick the specs you need, then view products that match.
| Housing Material | Technopolymer | |
|---|---|---|
| Connection | Cable entry M20 | |
| Product Series | Pizzato FY | |
| Device Type | Guard-locking switch | |
| Coil / Supply Voltage | 24 V AC/DC | |
| IP Rating | IP67, IP69K | |
| Safety Switch Type | Guard locking (solenoid) | |
| Guard Locking | Power to lock | |
| Manufacturer | Pizzato Elettrica | |
| Series | FY Series Safety Switches | |
| Model / SKU | FY60PD7E0A | |
| Manufacturer part number | FY 60PD7E0A | |
| Product type | Safety interlock switch with separate actuator and guard lock | |
| Contact block | 60P | |
| Contact operation | Slow action | |
| Actuator-operated contacts | 1NC | |
| Solenoid-operated contacts | 3NC | |
| Total contact configuration | 4NC | |
| Operating principle | E, actuator locked with energised solenoid | |
| Escape release | Yes | |
| Solenoid supply voltage | 24 V AC/DC | |
| Solenoid duty | 100% ED continuous | |
| Solenoid consumption | 9 VA | |
| Status indication | 2 green LEDs switched by solenoid supply | |
| Actuator | Not included | |
| Housing material | Glass-fibre-reinforced technopolymer | |
| Head and release device | Metal, powder-coated | |
| Cable entries | 3 × M20 × 1.5 threaded entries | |
| Released actuator extraction force | 30 N | |
| Maximum force before breakage FTEST | 2800 N | |
| Maximum holding force FZH | 2150 N | |
| Maximum clearance of locked actuator | 4.5 mm | |
| Maximum actuation speed | 0.5 m/s | |
| Minimum actuation speed | 1 mm/s | |
| Maximum actuation frequency | 600 cycles/hour | |
| Mechanical endurance | 1 million cycles | |
| Ambient operating temperature | -25 °C to +60 °C | |
| Protection rating | IP67 to EN 60529 and IP69K to ISO 20653 | |
| Interlock type | Type 2 coded mechanical interlock according to EN ISO 14119 | |
| Coding level | Low according to EN ISO 14119 | |
| Safety integrity | Up to SIL 3 according to EN IEC 62061 | |
| Performance Level | Up to PL e according to EN ISO 13849-1 | |
| B10D | 5,000,000 operations for NC contacts | |
| Mission time | 20 years | |
| Barcode / EAN | 8018851591884 | |
| HS Code | 85369095 |
The FY60PD7E0A uses a 60P slow-action contact block with 1NC contact operated by the actuator and 3NC contacts operated by the solenoid, providing a total configuration of four normally closed contacts.
The switch uses the E operating principle, meaning the actuator is mechanically locked while the solenoid is energised and can be released when the solenoid is de-energised.
Yes. The FY60PD7E0A incorporates an escape release button, providing a manual means of releasing the locking mechanism from within a protected machine area where required by the machinery safety design.
The FY60PD7E0A uses a 24 V AC/DC solenoid supply. The solenoid is designed for continuous 100% ED duty and has a consumption of 9 VA.
No. The FY60PD7E0A is supplied without an actuator, allowing a compatible Pizzato FY series actuator to be selected separately according to the machine guard and installation requirements.
Pizzato FY series guard-locking safety switches combine robust mechanical interlocking, monitored safety contacts and practical release functionality to provide dependable access control for industrial machinery, automated production cells and demanding machine guarding systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.