Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato FY60MD7E0A FY series safety switch with separate actuator and guard lock, featuring a 24 V AC/DC energised-solenoid locking principle, 2NO + 1NC actuator-operated contacts, 1NO solenoid-operated contact, escape release and two green status LEDs.
£117.33
The Pizzato FY60MD7E0A is a robust safety interlock switch with separate actuator and guard locking designed for controlling access to hazardous areas of industrial machinery. Part of the Pizzato FY series, it combines mechanical guard interlocking with solenoid-controlled locking and separate electrical monitoring of the actuator and electromagnet.
This model uses the E operating principle, meaning the actuator is mechanically locked when the solenoid is energised. Its 60M slow-action contact block provides 2NO + 1NC contacts operated by the actuator and 1NO contact operated by the solenoid, giving a total contact configuration of 3NO + 1NC for guard position and locking status signalling.
The FY60MD7E0A operates from a 24 V AC/DC solenoid supply and features a rotating head with an integrated escape release button. Two green LEDs illuminate from the solenoid power supply, while the technopolymer housing, three M20 × 1.5 cable entries and IP67/IP69K protection support reliable installation in demanding industrial machine guarding systems.
Safety switches with guard locking are used where controlled access to hazardous machinery forms part of the machine safety strategy. The Pizzato FY series combines a separate mechanical actuator, electrical contacts and an electromagnetic locking mechanism so that guard position and locking status can be integrated into an industrial safety relay, safety PLC or machine control system.
The FY60MD7E0A uses the E operating principle, so the actuator is locked while the solenoid is energised and can be released when the solenoid is de-energised. This operating method should be selected only where the machine safety assessment permits guard unlocking following loss of solenoid power. The integrated escape release button provides an additional manual means of releasing the lock from within a protected area where required by the machinery design.
Tick the specs you need, then view products that match.
| Housing Material | Technopolymer | |
|---|---|---|
| Connection | Cable entry M20 | |
| Product Series | Pizzato FY | |
| Device Type | Guard-locking switch | |
| Coil / Supply Voltage | 24 V AC/DC | |
| IP Rating | IP67, IP69K | |
| Safety Switch Type | Guard locking (solenoid) | |
| Guard Locking | Power to lock | |
| Manufacturer | Pizzato Elettrica | |
| Series | FY Series | |
| Model / SKU | FY60MD7E0A | |
| Manufacturer part number | FY 60MD7E0A | |
| Product type | Safety switch with separate actuator and guard lock | |
| Contact block | 60M | |
| Contact type | Slow action | |
| Actuator-operated contacts | 2NO + 1NC | |
| Solenoid-operated contacts | 1NO | |
| Total contact configuration | 3NO + 1NC | |
| Operating principle | E, actuator locked with energised solenoid | |
| Solenoid supply voltage | 24 V AC/DC | |
| Solenoid duty | 100% ED continuous | |
| Solenoid consumption | 9 VA | |
| Head | Rotating head with escape release button | |
| Escape release | Yes | |
| Auxiliary release | No | |
| Status indication | 2 green LEDs switched by solenoid supply | |
| Actuator | Not included | |
| Housing material | Glass-fibre-reinforced technopolymer | |
| Head and release device | Metal, powder-coated | |
| Cable entries | 3 × M20 × 1.5 threaded entries | |
| Released actuator extraction force | 30 N | |
| Maximum force before breakage | 2800 N | |
| Maximum holding force FZH | 2150 N | |
| Maximum clearance of locked actuator | 4.5 mm | |
| Maximum actuation speed | 0.5 m/s | |
| Minimum actuation speed | 1 mm/s | |
| Maximum actuation frequency | 600 cycles/hour | |
| Mechanical endurance | 1 million cycles | |
| Ambient operating temperature | -25 °C to +60 °C | |
| Protection rating | IP67 to EN 60529 and IP69K to ISO 20653 | |
| Interlock type | Type 2 coded mechanical interlock to EN ISO 14119 | |
| Coding level | Low according to EN ISO 14119 | |
| Safety integrity | Up to SIL 3 according to EN IEC 62061 | |
| Performance Level | Up to PL e according to EN ISO 13849-1 | |
| Barcode / EAN | 8018851591815 | |
| HS Code | 85369095 |
The FY60MD7E0A is used to monitor and mechanically lock machine guards, access doors and protective enclosures in industrial machinery and automated production systems.
The FY60MD7E0A uses a 60M slow-action contact block with 2NO + 1NC contacts operated by the actuator and 1NO contact operated by the solenoid, giving a total configuration of 3NO + 1NC.
The switch uses the E operating principle, meaning the actuator is mechanically locked while the solenoid is energised and can be released when the solenoid is de-energised.
The FY60MD7E0A uses a 24 V AC/DC solenoid supply with continuous 100% ED operation and a solenoid consumption of 9 VA.
The FY60MD7E0A features a rotating head with an escape release button, but it is supplied without the separate actuator, allowing a compatible Pizzato FY series actuator to be selected for the installation.
Pizzato FY series guard-locking safety switches provide dependable machine access protection by combining robust mechanical interlocking, separate actuator technology, monitored locking contacts and practical release functionality for industrial automation and machinery safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.