Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato FS 2898D230-FM2 is a 230 V AC/DC FS series safety interlock switch with separate straight actuator, de-energised solenoid guard locking, auxiliary key release, positive-opening safety contact and IP67 protection.
£90.82
The Pizzato FS 2898D230-FM2 is a robust safety interlock switch with separate actuator and solenoid guard locking designed for controlled access to hazardous areas of industrial machinery. As part of the Pizzato FS safety switch series, it combines mechanical guard-position monitoring with electrically controlled locking for dependable machine-safety applications.
This model uses working method D, meaning the actuator remains locked while the solenoid is de-energised. This principle is particularly suitable for machinery where a protective guard must remain secured until hazardous movement or processes have stopped. The switch also incorporates an auxiliary key release to permit authorised manual release of the locking mechanism when required.
Operating with a 230 V AC/DC solenoid supply, the FS 2898D230-FM2 provides 1 NC contact operated by the actuator plus 1 NO + 1 NC contacts operated by the solenoid. This version is equipped with a straight actuator, silver contacts and M20 × 1.5 threaded conduit connection, while its IP67 protection supports reliable operation in demanding industrial environments.
Safety interlock switches with guard locking are used where access to hazardous machine areas must be prevented while dangerous movement or processes remain active. The Pizzato FS series combines separate-actuator guard detection with solenoid-controlled retention, enabling a machine safety system to monitor both the position of the protective guard and the condition of its locking mechanism.
The FS 2898D230-FM2 uses a de-energised locking principle, helping keep the actuator mechanically retained when the solenoid is not powered. Combined with positive-opening contact operation, auxiliary key release, a straight actuator and IP67 environmental protection, it provides a dependable solution for safety-related access control on automated machinery.
Tick the specs you need, then view products that match.
| Housing Material | Technopolymer | |
|---|---|---|
| Product Series | Pizzato FS | |
| Device Type | Guard-locking switch | |
| Coil / Supply Voltage | 230 V AC/DC | |
| Contacts | 1NO + 2NC | |
| IP Rating | IP67 | |
| Safety Switch Type | Guard locking (solenoid) | |
| Manufacturer | Pizzato | |
| Series | FS Safety Switches with Lock | |
| Model | FS 2898D230-FM2 | |
| Product type | Safety interlock switch with separate actuator and solenoid lock | |
| Solenoid supply voltage | 230 V AC/DC | |
| Working method | D – actuator locked with de-energised solenoid | |
| Contact configuration | 1 NC operated by actuator + 1 NO + 1 NC operated by solenoid | |
| Positive opening | Yes | |
| Contact material | Silver | |
| Actuator | Straight actuator | |
| Auxiliary release | Key release | |
| Protection rating | IP67 | |
| Conduit connection | M20 × 1.5 threaded | |
| Connector | Without connector | |
| HS Code | 85369095 |
The FS 2898D230-FM2 is used to monitor and lock machine guards or safety doors, helping prevent access to hazardous machinery until safe operating conditions have been established.
Working method D means the actuator remains locked while the solenoid is de-energised, making the switch suitable for applications where guard retention is required without continuously energising the solenoid.
The guard-locking solenoid is designed for a 230 V AC/DC supply.
The switch provides 1 NC contact operated by the actuator plus 1 NO + 1 NC contacts operated by the solenoid, allowing the machine safety circuit to monitor guard position and locking status.
The FS 2898D230-FM2 uses a straight actuator and an M20 × 1.5 threaded conduit connection, and is supplied without an electrical connector.
Pizzato FS safety switches with guard locking provide dependable machine-access control through robust construction, positive-opening safety contacts and secure solenoid-controlled guard retention for industrial automation and machinery-safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.