Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato FD 6R2-L10F1M2 is an IP67 metal safety switch with a 10-second manual mechanical delay, VF KEYF1 angled separate actuator, 1 NO + 1 NC slow-action contacts and an M20 × 1.5 conduit entry for controlled access to industrial machinery.
£27.79
The Pizzato FD 6R2-L10F1M2 is a robust safety switch with manual mechanical delay and separate actuator designed for controlled access to industrial machinery where hazardous movement may continue after a stop command. Part of the Pizzato FD Series, it combines mechanical guard locking, positive-opening safety contacts and a deliberately timed manual release mechanism in a rugged metal enclosure.
The FD 6R2-L10F1M2 features a 1 NO + 1 NC slow-action contact configuration and an L10 long-knob mechanical delay of approximately 10 seconds. During the release sequence, the safety contact is positively opened before the guard actuator can be withdrawn, helping provide a defined period for residual machine movement to stop before access is permitted.
The F1 configuration uses the Pizzato VF KEYF1 angled actuator, while the M2 suffix specifies a single M20 × 1.5 threaded conduit entry. With its metal FD housing, IP67 protection according to EN 60529 and standard operating temperature range of -25 °C to +80 °C, the FD 6R2-L10F1M2 provides a dependable mechanically delayed guard-access solution for demanding machinery.
Industrial machinery containing flywheels, cutting tools, pulleys, shafts and other moving components can remain hazardous after a stop command has been issued. The Pizzato FD 6R2-L10F1M2 addresses this requirement with a manually operated mechanical sequence that first opens the safety contact and then delays release of the guard actuator for approximately 10 seconds.
Because the delayed-release function is mechanical, it does not depend on an electronic timing circuit or electrical supply for the delay itself. This makes the FD 6R2-L10F1M2 particularly suitable for machinery with a known run-down period where a simple, robust and predictable means of controlling guard access is required.
Tick the specs you need, then view products that match.
| Device Type | Guard-locking switch | |
|---|---|---|
| Product Series | Pizzato FD | |
| Contacts | 1NO + 1NC | |
| IP Rating | IP67 | |
| Safety Switch Type | Tongue interlock | |
| Housing Material | Metal | |
| Manufacturer | Pizzato Elettrica | |
| Series | FD Series | |
| Model | FD 6R2-L10F1M2 | |
| Alternative SKU | FD6R2L10F1M2 | |
| Product type | Safety switch with manual mechanical delay and separate actuator | |
| Contact configuration | 1 NO + 1 NC | |
| Contact block | B6 | |
| Contact action | Slow action | |
| Positive opening | Yes | |
| Mechanical delay | Long knob, approximately 10 seconds | |
| Delay configuration | L10 | |
| Actuator | VF KEYF1 | |
| Actuator type | Angled separate actuator | |
| Housing material | Metal | |
| Conduit entries | 1 | |
| Threaded conduit entry | M20 × 1.5 | |
| Contact material | Silver | |
| Protection rating | IP67 according to EN 60529 | |
| Operating temperature | -25 °C to +80 °C | |
| Pre-installed cable gland / connector | None | |
| Mounting type | Machine / guard mounting | |
| Barcode | 8018851467271 | |
| HS Code | 85369095 |
The FD 6R2-L10F1M2 is a safety switch with manual mechanical delay and separate actuator, designed to control access to guarded machinery where hazardous movement may continue after a stop command.
The L10 configuration uses a long operating knob with an approximately 10-second mechanical delay before the separate actuator can be released.
The FD 6R2-L10F1M2 uses a 1 NO + 1 NC slow-action B6 contact block with positive-opening safety operation.
The F1 configuration uses the Pizzato VF KEYF1 angled actuator, providing an angled actuator-entry arrangement for suitable machine guard installations.
The M2 suffix specifies one M20 × 1.5 threaded conduit entry. The standard configuration does not include a pre-installed cable gland or connector.
Pizzato Elettrica FD Series delayed-access safety switches combine robust metal construction, positive-opening electrical contacts and mechanically controlled guard release to provide dependable safeguarding for industrial machinery with predictable residual movement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.