Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato FD 21R2-L20F1M2 is a metal-bodied safety switch with a 20-second manual mechanical delay, 3NC slow-action contacts, bent actuator, M20 x 1.5 cable entry and IP67 protection for controlled access to industrial machine guards.
£31.35
The Pizzato FD 21R2-L20F1M2 is an FD series safety switch with manual mechanical delay designed for monitoring guards and access points on industrial machinery. Its manually operated delayed-release mechanism is particularly useful where access to a protected area should not occur immediately after the machine safety circuit has been interrupted.
This configuration combines a robust metal housing with a 3NC slow-action contact block and a manual mechanical delay head incorporating a long 20-second knob. The delayed operating sequence provides a mechanical waiting period before the actuator can be released, making the switch suitable for machinery where hazardous movement may require time to stop after a shutdown command.
The FD 21R2-L20F1M2 uses a bent actuator, an M20 × 1.5 threaded cable entry and provides IP67 protection according to EN 60529. These characteristics make it a practical safety-switching solution for industrial guards where rugged construction, positive-opening safety contacts and manually controlled delayed access are required.
On machinery with moving components that may continue to present a hazard for a short period after the stop command, immediately opening a guard can create unnecessary risk. The Pizzato FD 21R2-L20F1M2 addresses this requirement through a manual mechanical delay mechanism that introduces an approximately 20-second operating period before guard access can be completed.
The switch combines this delayed-access function with three normally closed slow-action contacts and a separate bent actuator. When correctly integrated into a suitable machine safety circuit, the arrangement enables the guard position to be monitored while the mechanical delay provides additional time for residual machine movement to cease before access.
Tick the specs you need, then view products that match.
| Connection | Cable entry M20 | |
|---|---|---|
| Product Series | Pizzato FD | |
| Contacts | 3NC | |
| IP Rating | IP67 | |
| Housing Material | Metal | |
| Manufacturer | Pizzato Elettrica | |
| Series | FD | |
| Model | FD 21R2-L20F1M2 | |
| Alternative SKU | FD21R2L20F1M2 | |
| Product type | Safety switch with manual mechanical delay | |
| Housing | Metal housing | |
| Contact block | B21 | |
| Contact configuration | 3NC | |
| Switching action | Slow action | |
| Safety contact operation | Positive opening | |
| Head | Manual mechanical delay | |
| Mechanical delay | 20 s | |
| Delay control | Long knob | |
| Actuator | Bent actuator | |
| Cable entry | 1 × M20 × 1.5 threaded entry | |
| Emergency release | No | |
| Auxiliary release | No | |
| Status indicator | No | |
| Protection rating | IP67 according to EN 60529 | |
| Barcode / EAN | 8018851587382 | |
| HS Code | 85369095 |
The FD 21R2-L20F1M2 is an FD series safety switch with manual mechanical delay, designed for monitoring industrial machine guards where access should be delayed after the safety circuit is operated.
This configuration incorporates a 20-second manual mechanical delay operated using a long knob.
The switch uses a B21 contact block with three normally closed (3NC) slow-action contacts.
The FD 21R2-L20F1M2 configuration is supplied with a bent separate actuator for operation by a compatible machine guard.
The metal FD-series enclosure has one M20 × 1.5 threaded cable entry for the electrical installation.
The safety switch is rated IP67 according to EN 60529, providing protection against dust ingress and temporary immersion in water when correctly installed.
A manual mechanical delay can be useful on machinery where hazardous movement continues briefly after a stop command, providing a defined waiting period before the protected guard can be opened.
No. This specific configuration is specified without emergency release and without auxiliary release.
Pizzato Elettrica safety switches are used by machine builders, automation engineers and industrial safety professionals for dependable guard monitoring and controlled access to hazardous areas on industrial machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.