Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB LineStrong2 2TLA050202R0332 is an IP67 pull-wire emergency stop safety switch for spans up to 80 m, featuring 2 NC and 2 NO contacts, an integrated emergency stop button, 24 V DC LED indication and three M20 conduit entries.
£277.34
The ABB LineStrong2, order code 2TLA050202R0332, is a robust pull wire emergency stop safety switch designed to provide accessible emergency stopping along conveyors, production lines and other extended machinery. This LineStrong2 model supports pull-wire installations of up to 80 m, providing an effective emergency-stop interface where conventional individual push buttons may not provide sufficient coverage.
The LineStrong2 combines 2 normally closed and 2 normally open contacts with an integrated emergency stop button and LED status indication. Its yellow die-cast housing incorporates three M20 × 1.5 conduit entries, while the monitored pull-wire mechanism responds when the wire is deliberately pulled or when the required wire tension is lost.
Designed for demanding industrial environments, the LineStrong2 provides IP67 enclosure protection and can support safety functions up to PL e / Category 4 and SIL 3 when incorporated into an appropriately designed safety system. Its long wire coverage, integrated emergency-stop actuator and visual status indication make it particularly suitable for conveyor and material-handling safety applications.
Pull-wire emergency stop systems are particularly useful on conveyors and elongated machinery because the emergency-stop control can remain accessible over a much greater working area than a single fixed push button. A tensioned safety wire runs alongside the machinery, allowing an operator to initiate the emergency-stop function by pulling the wire from an accessible point along the protected span.
The ABB LineStrong2 also monitors the mechanical condition of the tensioned wire arrangement. Operation of the wire or loss of the required tension causes the safety contacts to change state, allowing the connected safety control system to respond. The integrated emergency-stop push button provides an additional local operating point directly on the switch, while the LED offers convenient visual status indication.
Tick the specs you need, then view products that match.
| Device Type | Rope-pull switch | |
|---|---|---|
| Product Series | ABB LineStrong | |
| Product group | Emergency stops | |
| Series | LineStrong | |
| Order code | 2TLA050202R0332 | |
| Product type | Pull wire / grab wire emergency stop safety switch | |
| Maximum wire span | Up to 80 m | |
| Contact configuration | 2 NC + 2 NO | |
| Contact type | IEC/EN 60947-5-1 double-break, Type Zb snap action | |
| Contact material | Silver | |
| Emergency stop button | Yes | |
| Status indication | LED | |
| LED voltage | 24 V DC | |
| Housing material | Die-cast metal | |
| Housing colour | Yellow | |
| Conduit entries | 3 × M20 × 1.5 | |
| Degree of protection | IP67 | |
| Ambient operating temperature | -25 to +80 °C | |
| Recommended wire | PVC-sheathed steel wire | |
| Wire outside diameter | 4.0 mm | |
| Wire tension device | Quick-fixing tensioner / gripper | |
| Typical wire tension | 130 N | |
| Wire pull operating force | Less than 125 N with less than 300 mm deflection | |
| Terminal capacity | Up to 2.5 mm² conductors | |
| Thermal current | 10 A | |
| Utilisation category | AC-15, A300, 3 A | |
| Rated insulation / withstand voltage | 500 V AC / 2500 V AC | |
| Mechanical reliability B10d | 1.5 × 106 operations at 100 mA load | |
| Proof test interval | 21 years | |
| MTTFd | 214 years at the specified reference usage | |
| Performance level | Up to PL e depending on system architecture | |
| Safety category | Up to Category 4 depending on system architecture | |
| Safety integrity level | Up to SIL 3 depending on system architecture |
The ABB LineStrong2 is a pull-wire emergency stop safety switch designed to provide accessible emergency stopping along conveyors, production lines and other extended industrial machinery.
The ABB LineStrong2 2TLA050202R0332 is designed for pull-wire installations of up to 80 m when installed using the appropriate wire, tensioning components and mounting arrangement.
The LineStrong2 2TLA050202R0332 provides 2 normally closed (NC) and 2 normally open (NO) contacts using double-break Type Zb snap-action contact construction.
Yes. This LineStrong2 model incorporates an emergency stop push button and 24 V DC LED status indication in addition to its pull-wire emergency-stop mechanism.
The LineStrong2 monitors the tensioned pull-wire arrangement. Pulling the wire or loss of the required wire tension causes the safety contacts to operate, enabling the connected safety control system to initiate the appropriate safe response.
ABB LineStrong pull-wire emergency stop switches provide accessible safety control along conveyors and extended machinery, with the LineStrong2 combining an 80 m pull-wire capability, monitored wire operation, local emergency-stop actuation and LED status indication in a robust IP67 industrial housing.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.