Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB INCA 1S Tina v2 2TLA030054R0210 is a compact black panel-mounted safety stop button with integrated DYNlink Tina electronics, status LED and a 5-pin screw terminal block for 24 V DC machine safety systems.
£138.56
The ABB INCA 1S Tina v2, order code 2TLA030054R0210, is a compact black safety stop button designed for panel mounting in industrial machine safety applications. It fits a standard 22.5 mm panel opening and incorporates ABB Tina electronics for direct integration into a DYNlink safety circuit.
Unlike the red INCA emergency-stop variants, the INCA 1S Tina v2 uses a black pushbutton for safety-stop applications. A status LED integrated into the button provides local visual indication, while a 5-pin screw terminal block provides the electrical connection. The device operates from a nominal 24 V DC PELV/SELV supply.
The INCA 1S Tina v2 can be used in DYNlink safety circuits monitored by compatible ABB safety controllers or safety PLCs. Its compact v2 construction requires only approximately 75.5 mm installation depth, while the operator side provides IP65 protection. When correctly incorporated into a suitable safety architecture, the device supports safety functions up to PL e, Category 4 and SIL 3.
ABB's DYNlink concept allows compatible safety devices to exchange a dynamic safety signal with an ABB safety controller or safety PLC. The Tina electronics required for this interface are integrated directly into the INCA 1S Tina v2, reducing the need for a separate external Tina adaptation unit and helping simplify safety-system wiring.
The INCA 1S Tina v2 is specifically a safety stop with a black button rather than a red emergency stop. Its compact panel-mounted format makes it suitable for operator stations, machine enclosures and smaller control boxes where installation space is limited. The complete safety function must be designed and validated according to the machine risk assessment, required safety performance and applicable standards.
Tick the specs you need, then view products that match.
| Connection | Screw terminals | |
|---|---|---|
| Coil / Supply Voltage | 24 V DC | |
| Product Series | ABB INCA | |
| Series | INCA Tina | |
| Order code | 2TLA030054R0210 | |
| Product group | Emergency stops | |
| Product type | Safety stop button | |
| Button colour | Black | |
| Mounting | Panel mounting | |
| Mounting opening | 22.5 mm | |
| Safety interface | Tina adaptation to DYNlink | |
| Output | DYNlink | |
| Operating voltage | 24 V DC +15% / -25% | |
| Required supply type | PELV / SELV | |
| Maximum total current consumption | 35 mA RMS | |
| Information output current | max. 10 mA | |
| Status indication | LED integrated in button | |
| Electrical connection | 5-pin screw terminal block | |
| Degree of protection | IP65; IP20 at connection terminal | |
| Operating ambient temperature | -10 to +55 °C | |
| Storage temperature | -30 to +70 °C | |
| Performance Level | Up to PL e, Category 4 | |
| Safety Integrity Level | Up to SIL 3 | |
| Product net depth / length | 75.5 mm | |
| Product net height | 32.2 mm | |
| Product net width | 32.2 mm | |
| Product net weight | approx. 0.042 kg | |
| GTIN | 7350024485820 | |
| Customs tariff number | 85365011 |
The ABB INCA 1S Tina v2 is a black panel-mounted safety stop button with integrated Tina adaptation to DYNlink, a status LED and a 5-pin screw terminal block.
The INCA 1S Tina v2 is specified by ABB as a safety stop button with a black actuator. The related INCA 1 Tina v2 uses a red button and is specified as an emergency stop.
The INCA 1S Tina v2 is designed for installation through a standard 22.5 mm panel opening.
The device incorporates Tina adaptation for ABB DYNlink, allowing it to be connected into a compatible DYNlink safety circuit monitored by an ABB safety controller or safety PLC.
When correctly incorporated into a suitably designed and validated safety function, the INCA 1S Tina v2 can support applications up to PL e, Category 4 according to EN ISO 13849-1 and SIL 3.
ABB INCA Tina controls combine compact 22.5 mm panel mounting with integrated DYNlink connectivity, with the INCA 1S Tina v2 providing a black safety-stop actuator, status indication and high-level functional safety capability for compatible industrial machine safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.