Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 2TLA020054R0700 Tina 7A is a 24 V DC DIN-rail DYNlink adapter unit for connecting safety devices with two positively driven potential-free contacts to ABB Vital and Pluto dynamic safety circuits.
£64.86
The ABB 2TLA020054R0700, designated Tina 7A, is a DYNlink adapter unit designed to connect safety devices with two positively driven, force-guided potential-free contacts to an ABB DYNlink dynamic safety circuit. Identified by ABB reference 20-054-07 and classified within the Vital and Tina product group, it provides a convenient interface for conventional contact-based safety devices such as emergency-stop buttons and safety switches.
Tina 7A is intended for DIN-rail installation inside electrical cabinets. The connected safety device must be located in the same cabinet, making the unit particularly suitable for cabinet-mounted emergency-stop devices, key switches and similar safety controls. Electrical connections are made through detachable terminal blocks, helping simplify installation, servicing and replacement.
Operating from 24 V DC, the Tina 7A converts the status of the connected dual-contact safety device into the dynamic signal used by ABB Vital and Pluto safety systems. It supports safety applications up to SIL 3 and PL e / Category 4 when correctly integrated into the complete safety function.
The ABB Tina 7A enables conventional safety devices with suitable potential-free contacts to become part of an ABB DYNlink dynamic safety circuit. Typical examples include emergency-stop buttons, key-operated safety switches and other devices providing two positively driven contacts. Tina 7A monitors the connected contact circuit and converts its state into the dynamic signal required by the associated Vital or Pluto safety controller.
Unlike field-mounted Tina adapters, the Tina 7A is specifically designed for DIN-rail installation inside an electrical cabinet. ABB specifies that the connected safety device should be mounted in the same cabinet, making Tina 7A especially suitable for adapting cabinet-mounted emergency stops and switches without requiring a separate field adapter.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product group | Vital and Tina | |
| Series | Tina | |
| Order code | 2TLA020054R0700 | |
| Reference | 20-054-07 | |
| Product type | DYNlink adapter unit | |
| Application | Adaptation of safety devices with potential-free contacts to DYNlink | |
| Safety-device contacts | Two positively driven, force-guided contacts | |
| Installation | Electrical cabinet | |
| Mounting | 35 mm DIN rail | |
| Electrical connection | Detachable terminal blocks | |
| Operating voltage | 24 V DC, +15% / -25% | |
| Required power supply | PELV/SELV | |
| Maximum total current consumption | 35 mA RMS | |
| DYNlink input signal voltage | 8–15 V RMS | |
| DYNlink output signal voltage | 8–15 V RMS | |
| Maximum DYNlink input-to-output delay | 70 µs | |
| Information output high | Nominally operating voltage -2 V DC | |
| Information output low | Maximum 2 V DC | |
| Maximum information output current | 10 mA | |
| Nominal current through closed safety contacts | 2 mA RMS | |
| Contact wetting current | Nominally 12 mA for 700 µs after contact closure | |
| Maximum closed-loop resistance | 500 Ω | |
| Minimum open-loop resistance | 20 kΩ | |
| Protection rating | IP20 | |
| Dimensions | 62 × 46 × 13 mm | |
| Product net weight | approx. 0.035 kg | |
| Safety integrity level | SIL 3 according to IEC/EN 61508 and EN 62061 | |
| Performance level | PL e according to EN ISO 13849-1 | |
| Safety category | Category 4 according to EN ISO 13849-1 | |
| PFHD | 4.50 × 10-9 | |
| EAN / UPC | 7350024451894 |
The ABB Tina 7A is a DYNlink adapter unit used to connect safety devices with suitable potential-free contacts, such as emergency-stop buttons and safety switches, to ABB DYNlink safety circuits.
The Tina 7A is designed for installation on a 35 mm DIN rail inside an electrical cabinet. The connected safety device should also be located in the same cabinet.
Electrical connections to the Tina 7A are made using detachable terminal blocks, allowing straightforward connection of the power supply, DYNlink circuit and compatible safety-device contacts.
The ABB Tina 7A operates from a 24 V DC PELV/SELV supply with a specified operating tolerance of +15% / -25%.
When correctly integrated into the complete safety function, the Tina 7A supports applications up to SIL 3 according to IEC/EN 61508 and EN 62061 and PL e / Category 4 according to EN ISO 13849-1.
ABB Tina 7A provides a compact DIN-rail interface for incorporating conventional dual-contact safety devices into Vital and Pluto DYNlink architectures, combining detachable terminal wiring, dynamic-signal conversion and high functional-safety capability for industrial machine control panels.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.