Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB Tina 3A 2TLA020054R0200 is a 24 V DC IP67 safety adapter unit with an M12-5 male connector for connecting devices with two positively driven force-guided contacts to ABB DYNlink dynamic safety circuits.
£56.46
The ABB Tina 3A 2TLA020054R0200 is a compact and reliable safety adapter unit designed to connect safety devices with two positively driven force-guided contacts to ABB's DYNlink dynamic safety circuit. As part of the ABB Vital and Tina product group, it provides an effective interface for incorporating conventional emergency stop buttons, key switches and similar mechanical safety devices into modern dynamic safety systems.
The Tina 3A converts the signals from two safety contacts for use within the DYNlink solution, simplifying machine safety system design while maintaining a high level of functional safety. It mounts directly onto the safety device enclosure through an M20 cable entry and incorporates an M12-5 male connector for straightforward connection to the DYNlink loop.
Operating from a 24 V DC supply and featuring an IP67 protection rating, the Tina 3A is designed for demanding industrial environments. Its compact construction, integrated status indication and convenient M12 connectivity make it particularly suitable for machine builders and automation engineers integrating conventional safety contacts with ABB Vital, Pluto or compatible DYNlink safety circuits.
The ABB Tina system enables conventional mechanical safety components to be incorporated into dynamic safety circuits. The Tina 3A is specifically designed to adapt devices with two positively driven force-guided contacts, allowing equipment such as emergency stop buttons and key-operated safety switches to communicate with the ABB DYNlink safety solution.
The Tina 3A mounts directly onto the safety device enclosure and provides an M12-5 connection to the DYNlink loop, helping simplify installation and replacement. Its dynamic signal handling and rugged IP67 construction make it well suited to industrial machine safety installations where reliable monitoring, compact installation and straightforward connectivity are required.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product group | Vital and Tina | |
| Part number | 20-054-02 | |
| ABB order code | 2TLA020054R0200 | |
| Product type | Safety adapter unit | |
| Safety contacts | 2 contacts | |
| Application | Adaptation of devices with two positively driven force-guided contacts to DYNlink | |
| Operating voltage | +24 V DC +15% / -25% | |
| Required power supply type | PELV / SELV | |
| Total current consumption | Maximum 35 mA RMS | |
| DYNlink input signal voltage | 8–15 V RMS | |
| DYNlink output signal voltage | 8–15 V RMS | |
| DYNlink input/output delay | Maximum 70 µs | |
| Information output current | Maximum 10 mA | |
| Current through closed safety device contacts | Nominal 2 mA RMS | |
| Contact wetting current | Nominal 12 mA for 700 µs after contact closure | |
| Maximum closed-loop resistance | 500 Ω | |
| Minimum open-loop resistance | 20 kΩ | |
| Connection | M12-5 male connector | |
| Device mounting interface | M20 cable entry | |
| Protection rating | IP67 | |
| Safety integrity level | SIL 3 | |
| Performance level | PL e / Category 4 | |
| PFHD | 4.50 × 10-9 | |
| Dimensions (D × H × W) | 24 × 24 × 57 mm | |
| Net weight | approx. 0.026 kg |
The Tina 3A is used to adapt safety devices with two positively driven force-guided contacts, such as emergency stop buttons and key switches, for connection to an ABB DYNlink dynamic safety circuit.
The Tina 3A incorporates an M12-5 male connector for connection to the DYNlink loop and is designed to mount directly onto the safety device enclosure through an M20 cable entry.
The Tina 3A operates from a nominal 24 V DC supply, with an operating range of +15% / -25%.
The Tina 3A has an IP67 protection rating, providing protection suitable for demanding industrial machine-safety environments when correctly installed.
The Tina 3A is designed for high-integrity machine safety systems and supports applications up to SIL 3 and PL e / Category 4 when correctly incorporated into an appropriately designed safety circuit.
ABB Vital and Tina safety products provide machine builders and automation engineers with a flexible way to integrate conventional safety devices into DYNlink dynamic safety circuits, supporting reliable monitoring and high-integrity machine safety applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.