Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato CS AM-01ME01 CS AM series safety module for motor standstill detection, featuring 2 NO safety contacts, residual-voltage monitoring and support for safety applications up to Category 3, PL d and SIL 2.
The Pizzato CS AM-01ME01 is a dedicated motor standstill detection safety module designed to determine when an electric motor has stopped before permitting access to hazardous machinery. Part of the Pizzato CS AM safety module range, it monitors residual voltage generated by a rotating motor, allowing movement to be detected even when the motor is no longer electrically powered but continues to rotate through inertia.
The CS AM-01ME01 provides a sensorless approach to motor standstill monitoring by connecting its measurement circuits to the motor windings. The motor-standstill residual-voltage threshold can be selected across 10 sensitivity positions, allowing the monitoring system to be adapted to different motor and machine characteristics. Galvanic separation between the control and measurement circuits further supports dependable industrial operation.
Designed for safety applications up to Category 3, PL d and SIL 2, the CS AM-01ME01 provides 2 NO safety contacts and 1 NC signalling contact. It also provides two semiconductor signalling outputs and supports measurement circuits connected to both single-phase and three-phase motors, making it a versatile solution for machine guarding, access control and safe maintenance applications.
Motor standstill monitoring is important where operators must not gain access to hazardous moving parts until rotation has ceased. The Pizzato CS AM-01ME01 monitors residual voltage produced by the motor while it is rotating and allows its safety outputs to change state only when the measured condition corresponds to motor standstill.
Unlike solutions that require a separate mechanical speed sensor, residual-voltage monitoring enables the module to detect continued motor movement directly through the motor measurement circuits. This is particularly useful for machinery with significant rotational inertia, where shafts, blades, flywheels or other components may continue moving after electrical power to the motor has been removed.
Tick the specs you need, then view products that match.
| Reset Type | Automatic | |
|---|---|---|
| SIL (up to) | SIL 2 | |
| Terminal Type | Screw | |
| Mounting Type | DIN rail | |
| Safety Functions | Standstill monitoring | |
| Device Type | Standstill / speed monitor | |
| Safety Outputs | 2NO | |
| Output Type | Relay contacts | |
| Product Series | Pizzato CS | |
| Coil / Supply Voltage | 110 V AC, 110 V DC, 115 V AC, 120 V AC, 125 V DC, 208 V AC, 220 V AC, 220 V DC, 230 V AC, 24 V AC, 24 V DC, 48 V AC, 48 V DC, 60 V DC, 72 V DC | |
| Manufacturer | Pizzato Elettrica | |
| Series | CS AM | |
| Model | CS AM-01ME01 | |
| Product type | Motor standstill detection safety module | |
| Safety function | Motor standstill monitoring | |
| Safety category | Category 3 | |
| Performance Level | PL d | |
| Safety Integrity Level | SIL 2 | |
| Safety contacts | 2 NO | |
| Signalling contact | 1 NC | |
| Semiconductor signalling outputs | 2 | |
| Residual-voltage sensitivity | 10 selectable positions | |
| Supply voltage | 24–230 V AC/DC | |
| Measurement compatibility | Single-phase and three-phase motors | |
| Electrical isolation | Galvanic separation between control and measurement circuits | |
| Connection type | Removable connectors with screw terminals | |
| Mounting | DIN rail | |
| Housing width | 45 mm | |
| HS Code | 85369095 |
The CS AM-01ME01 is a safety module designed to detect when an electric motor has reached standstill, allowing its safety contacts to be incorporated into machine guarding and safe-access systems.
It monitors the residual voltage generated by the rotating motor, enabling it to detect continued movement even when electrical power to the motor has been removed.
The module is designed for safety applications up to Category 3, Performance Level d (PL d) and SIL 2.
The CS AM-01ME01 provides 2 NO safety contacts, together with 1 NC signalling contact and two semiconductor signalling outputs.
Yes. Its measurement circuits can be connected for motor standstill monitoring on both single-phase and three-phase motors.
Pizzato CS AM safety modules provide machine builders and automation engineers with dependable motor monitoring solutions designed to support safe access, machine guarding and controlled intervention around hazardous rotating equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.