Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato ST DD420N10-D0T is a 24 V DC ST D series RFID non-contact safety sensor with two safety outputs, two safety inputs, a signalling output, programming input, pre-wired 10 m PVC cable and D0T low-level coded actuator for industrial machine guard monitoring.
£111.54
The Pizzato ST DD420N10-D0T is an industrial RFID non-contact safety sensor with actuator designed for reliable monitoring of guards, doors and protective devices on automated machinery. As part of the Pizzato ST D series, it uses coded RFID technology and redundant electronic safety architecture to provide dependable machine safeguarding without the mechanical wear associated with conventional electromechanical switches.
The ST DD420N10-D0T provides two safety outputs, one signalling output, two safety inputs and one programming input, allowing flexible integration into modern machine safety systems. ST D series sensors are designed for safety applications up to PL e, Category 4 and SIL 3 when correctly integrated, while their non-contact operating principle provides long service life in machinery with frequent operating cycles.
Operating from a 24 V DC supply, this specific N10 version is supplied with a pre-wired 10 m PVC cable for direct connection into machine control systems. The supplied D0T standard actuator uses a low level of coding, while the sensor provides an approximately 12 mm actuation distance and robust IP67 / IP69K environmental protection for demanding industrial installations.
RFID safety sensors such as the Pizzato ST D series monitor the position of movable guards by detecting a digitally coded actuator without requiring physical contact between the sensor and actuator. The absence of mechanical switching elements helps reduce wear and provides long service life in automated machinery involving frequent operating cycles or demanding environmental conditions.
The ST DD420N10-D0T combines dual safety inputs and outputs with a signalling output and programming input, enabling integration with compatible safety controllers and other Pizzato safety devices. Its pre-wired 10 m cable is particularly useful where the safety sensor must be installed at a significant distance from the control enclosure, while the D0T low-level coded actuator provides straightforward RFID guard detection.
Tick the specs you need, then view products that match.
| Cable Length (m) | 10 m | |
|---|---|---|
| Product Series | Pizzato ST D (RFID) | |
| Sensing Principle | RFID (coded) | |
| Coding Level | Low | |
| Contacts | 2 safety outputs (OSSD) + 1 signalling | |
| Supplied As | Sensor + actuator kit | |
| Connection | Integrated cable | |
| IP Rating | IP67, IP69K | |
| Manufacturer | Pizzato Elettrica | |
| Series | ST D RFID Safety Sensors | |
| Model | ST DD420N10-D0T | |
| Alternative SKU | STDD420N10D0T | |
| Product type | RFID non-contact safety sensor with actuator | |
| Technology | RFID coded non-contact switching | |
| Power supply | 24 V DC | |
| Safety outputs | 2 | |
| Signalling outputs | 1 | |
| Safety inputs | 2 | |
| Programming inputs | 1 | |
| Electrical connection | Pre-wired PVC cable | |
| Cable length | 10 m | |
| Cable output | Right-hand side | |
| Actuator | D0T standard actuator | |
| Actuator coding level | Low | |
| Actuation distance | approx. 12 mm | |
| Status indication | 4 LEDs | |
| Protection rating | IP67 / IP69K | |
| Maximum performance level | Up to PL e, Category 4 according to EN ISO 13849-1 when correctly integrated | |
| Maximum safety integrity level | Up to SIL 3 according to EN 62061 when correctly integrated | |
| Barcode | 8018851284489 | |
| HS Code | 85369095 |
The ST DD420N10-D0T is designed for non-contact safety monitoring of machine guards, doors and protective devices in industrial machinery and automation systems.
This version is supplied with a pre-wired 10 m PVC cable, allowing direct connection between the safety sensor and the machine control or safety system.
The sensor is supplied with a D0T standard RFID actuator with a low level of coding, intended for reliable non-contact guard detection.
The sensor provides two safety outputs, one signalling output, two safety inputs and one programming input for flexible integration into industrial machine safety systems.
When correctly integrated into a suitable safety architecture, the Pizzato ST D series can support safety functions up to PL e, Category 4 according to EN ISO 13849-1 and SIL 3 according to EN 62061.
Pizzato ST D series RFID safety sensors are used by machine builders, automation engineers and industrial manufacturers requiring reliable non-contact guard monitoring, flexible safety integration and durable performance in modern industrial machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.