Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Pizzato ST DD210M0.5-D0T is a 24 V DC ST D series RFID safety sensor with two OS1-OS2 safety outputs, one O3 signalling output, low-level coded RFID actuation and a 0.5 m cable with M12 connector for non-contact industrial machine guard monitoring.
£98.94
The Pizzato ST DD210M0.5-D0T is an advanced RFID safety sensor designed for reliable non-contact monitoring of guards, doors and access points on industrial machinery. As part of the Pizzato ST D series, it combines RFID actuator detection with electronic safety outputs to provide dependable guard monitoring for modern industrial automation and machine safety systems.
The ST D series uses RFID technology to identify the associated actuator without requiring mechanical contact, helping reduce wear while providing reliable detection of guard position. The ST DD210M0.5-D0T provides two OS1-OS2 safety outputs and one O3 signalling output, enabling integration with compatible safety modules, safety relays and safety PLCs.
Operating from a 24 V DC supply, the ST DD210M0.5-D0T features a 0.5 m cable with M12 connector for convenient connection within industrial machinery. This D0T configuration uses a low coding level RFID actuator, while the ST D series technopolymer construction and high environmental protection provide reliable operation in demanding industrial environments.
RFID safety sensors such as the Pizzato ST D series monitor movable machine guards electronically without requiring physical contact between the sensor and actuator. When the appropriate RFID actuator enters the sensing area, the sensor evaluates its presence and provides electronic safety signals that can be monitored by a compatible safety module or safety PLC.
The ST DD210M0.5-D0T combines two electronic safety outputs with a separate signalling output and a convenient 0.5 m M12 connection lead. This provides a practical solution for machine builders requiring reliable guard monitoring, straightforward electrical connection and integration into modern safety-related automation systems.
Tick the specs you need, then view products that match.
| Cable Length (m) | 0.5 m | |
|---|---|---|
| Sensing Principle | RFID (coded) | |
| Coding Level | Low | |
| Contacts | 2 safety outputs (OSSD) + 1 signalling | |
| Supplied As | Sensor + actuator kit | |
| Connection | M12 connector | |
| Product Series | Pizzato ST D (RFID) | |
| IP Rating | IP67, IP69K | |
| Manufacturer | Pizzato Elettrica | |
| Series | ST D | |
| Model | ST DD210M0.5-D0T | |
| Product type | RFID safety sensor | |
| Detection technology | RFID / electronic non-contact sensing | |
| Safety outputs | 2, OS1-OS2 | |
| Signalling outputs | 1, O3 | |
| Nominal supply voltage | 24 V DC | |
| Connection | 0.5 m cable with M12 connector | |
| Cable length | 0.5 m | |
| Connector type | M12 | |
| Housing material | Technopolymer | |
| Actuator coding level | Low | |
| Actuator technology | RFID | |
| Holding magnet | No | |
| Protection rating | IP67 / IP69K | |
| Ambient temperature | -25 to +70 °C | |
| Performance Level | Up to PL e with suitable safety architecture | |
| Safety category | Up to Category 4 with suitable safety architecture | |
| SIL | Up to SIL 3 with suitable safety architecture | |
| Barcode / EAN | 8018851620300 | |
| HS Code | 85369095 |
The sensor is designed for non-contact RFID monitoring of machine guards and safety doors, allowing a compatible safety control system to determine whether a protected access point is correctly closed.
The sensor provides two safety outputs, OS1 and OS2, together with a separate O3 signalling output for machine and guard status information.
The ST DD210M0.5-D0T is designed for a nominal 24 V DC supply, making it suitable for integration into industrial automation and machine safety control systems.
The sensor features a 0.5 m cable with an M12 connector, providing a convenient detachable connection for machine wiring and maintenance.
The D0T configuration uses a low coding level RFID actuator for non-contact detection of the associated machine guard.
Pizzato ST D series RFID safety sensors provide reliable non-contact guard monitoring for industrial machinery, combining electronic safety outputs, RFID actuator detection and robust construction for modern machine safety and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.