Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
EMAS LK20K23 is a slow-action replacement limit switch contact block featuring one normally closed and one normally open contact, a 3 A AC-15 rating at 240 V AC, positive-opening functionality and compatibility with selected EMAS L Series limit switch housings.
£6.22
The EMAS LK20K23 is a high-performance slow-action replacement contact block featuring one normally closed (1NC) and one normally open (1NO) contact, designed for compatible EMAS industrial limit switches. It provides dependable mechanical position detection and electrical control switching in machinery, automation systems and industrial equipment.
Featuring a 3 A rated operating current at 240 V AC (AC-15), the LK20K23 incorporates a slow-action contact mechanism with a short operating plunger arrangement. Unlike snap-action contacts, slow-action contacts operate progressively in response to actuator movement, making them suitable for applications requiring controlled mechanical switching.
With silver nickel (AgNi) contacts, a minimum mechanical endurance of 10 million operations and compatibility with multiple EMAS limit switch housing series, the LK20K23 provides a practical replacement solution for maintaining industrial limit switch assemblies.
The EMAS LK20K23 uses a slow-action switching mechanism in which contact movement follows the mechanical displacement of the limit switch actuator. This differs from snap-action mechanisms, which change contact state rapidly once a defined operating point is reached.
The 1NC + 1NO configuration enables two complementary electrical functions within a compatible limit switch assembly. The normally closed contact can be used for an appropriate control or monitoring circuit, while the normally open contact provides an additional position-dependent signal.
The LK20K23 also features a positive-opening normally closed contact arrangement, supporting applications where direct mechanical opening of the NC contact is required. Any safety-related use must be assessed as part of the complete machine control system, including the selected housing, actuator and associated circuitry.
Its replaceable construction is particularly beneficial during industrial maintenance, allowing engineers to restore the electrical contact functionality of a compatible EMAS limit switch without unnecessarily replacing the entire assembly.
Tick the specs you need, then view products that match.
| Device Type | Limit switch accessory | |
|---|---|---|
| Switching Action | Slow action | |
| Manufacturer | EMAS | |
| Part number | LK20K23 | |
| Product type | Replacement limit switch contact block | |
| Product family | Limit switch spare parts | |
| Contact action | Slow action | |
| Contact configuration | 1NC + 1NO | |
| Normally closed contacts | 1 | |
| Normally open contacts | 1 | |
| Actuating plunger | Short | |
| Positive-opening function | Yes | |
| Rated operating current (Ie) | 3 A at 240 V AC | |
| Utilisation category | AC-15 | |
| Rated insulation voltage (Ui) | 300 V | |
| Rated impulse withstand voltage (Uimp) | 2.5 kV | |
| Mechanical endurance | Minimum 10,000,000 operations | |
| Electrical endurance | Minimum 1,000,000 operations | |
| Mechanical operating frequency | 3,000 operations/hour | |
| Electrical operating frequency | 1,800 operations/hour | |
| Dielectric strength, body to contact | 1,890 V AC | |
| Dielectric strength, contact to contact | 1,890 V AC | |
| Insulation resistance | 10 MΩ at 500 V DC | |
| Operating temperature | −25 to +80 °C | |
| Pollution degree | 3 | |
| Contact material | Silver nickel (AgNi) | |
| Conductor cross-section | 1–2.5 mm² | |
| Terminal tightening torque | 1.5 Nm | |
| Short-circuit breaking capacity (Ics) | 1 kA under specified conditions | |
| Compatible limit switch families | L1, L2, L3, L5, L51, L52, L53 and L54 | |
| Applicable standards | TS EN 60947-5-1, UL 508, VDE 0660 | |
| Certifications | CE, EAC, UKCA; UL contact block certification |
The EMAS LK20K23 is a replacement slow-action contact block for compatible EMAS industrial limit switches, used in machinery position detection, electrical control and industrial automation applications.
The LK20K23 features one normally closed (1NC) and one normally open (1NO) contact, providing complementary electrical switching functions.
A slow-action contact block changes its contact state progressively as the actuator moves, whereas a snap-action contact block switches rapidly when its operating point is reached. The LK20K23 is the slow-action version.
The LK20K23 is rated at 3 A at 240 V AC for the AC-15 utilisation category, with a rated insulation voltage of 300 V.
The LK20K23 is designed for compatible EMAS L1, L2, L3, L5, L51, L52, L53 and L54 limit switch housing families.
Yes. The LK20K23 is identified as a positive-opening contact block. Suitability for a particular safety-related application depends on the complete switch assembly and machine control system design.
The contact block is specified for a minimum of 10 million mechanical operations and 1 million electrical operations under the manufacturer's stated conditions.
No. The LK20K23 is a replacement contact block and requires a compatible EMAS limit switch housing and actuator to form a complete mechanically operated limit switch assembly.
EMAS industrial limit switch contact blocks provide dependable replacement solutions for machinery control and automation systems. The EMAS LK20K23 combines slow-action switching, 1NC + 1NO contacts, positive-opening functionality and long mechanical endurance to support reliable operation of compatible EMAS limit switch assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.