2TLA076200R0500 ABB ASB 60/100 Black/Yellow Safety Bumper

Why Choose the ABB ASB 60/100 Black/Yellow Safety Bumper?

The ABB ASB 60/100, order code 2TLA076200R0500, is a pressure-sensitive safety bumper designed to help protect personnel from crushing and trapping hazards around moving industrial machinery. Its compliant bumper construction detects physical contact and provides a switching signal that can be monitored by the associated machine safety system.

This ASB version has a nominal cross-section of 60 × 100 mm and a highly visible black/yellow imitation-leather covering. ABB supplies the bumper in application-specific lengths, with the required length specified in metres when ordering. Standard finished lengths range from 0.15 to 3 m, allowing the protective device to be matched closely to the machine area requiring coverage.

The ASB safety bumper provides approximately 60 mm of overtravel for this 100 mm-high profile, helping provide additional stopping distance after initial actuation. The complete custom bumper is configured using this profile-and-length order code together with ABB's separate bumper production-cost article, which includes the aluminium mounting rail and connection cables.

Key Advantages

• Pressure-sensitive protective device for detecting contact with hazardous moving machinery.
• Nominal 60 × 100 mm profile provides substantial compliant travel.
• Approximately 60 mm overtravel at a test speed of 10 mm/s.
• Black/yellow covering provides strong visual identification around machinery.
• Available in custom lengths from 0.15 to 3 m.
• Imitation-leather outer material provides a durable finished surface.
• Complete bumper assemblies include an aluminium mounting rail when the required production-cost article is ordered.
• Suitable for safeguarding applications where physical contact should initiate a machine safety response.

Key Features

• ABB ASB safety bumper.
• 60 mm nominal width.
• 100 mm nominal height.
• Black/yellow high-visibility finish.
• Imitation-leather covering material.
• Approximately 60 mm overtravel.
• Pressure-sensitive switching principle.
• Custom manufactured to the required length.
• Minimum standard length of 0.15 m.
• Maximum standard length of 3 m.
• Designed for industrial crushing and trapping hazard protection.
• Part of ABB's contact rails, bumpers and mats safety range.

Pressure-Sensitive Protection for Crushing and Trapping Hazards

ABB ASB safety bumpers are intended for locations where personnel could come into contact with a hazardous moving part. When the compliant bumper is compressed, its internal sensing system changes state so that the connected safety control system can initiate the required machine stop. The substantial deformation available after actuation helps provide stopping travel for applications where machinery cannot stop instantaneously.

The ASB system is manufactured to the required application length rather than being limited to fixed standard sections. For ordering, the required quantity in metres of 2TLA076200R0500 defines the ASB 60/100 black/yellow bumper length, while one 2TLA076200R0000 production-cost article is added for each finished bumper to provide the aluminium rail and cable configuration.

Typical Applications

• Automated guided machinery and moving equipment.
• Machine doors, gates and movable guards.
• Industrial transfer and material-handling equipment.
• Automated production and assembly machinery.
• Packaging and processing equipment.
• Moving machine sections presenting crushing hazards.
• Industrial access systems and moving structures.
• Machinery requiring pressure-sensitive contact protection over a custom length.