Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1TVS151800S3374 ABB EPX-8003SD Protecta Power 800A 3-Pole XT6 Incoming Switch Disconnector
ABB EPX-8003SD Protecta Power 800 A three-pole XT6 incoming switch disconnector, order code 1TVS151800S3374, designed for non-automatic incoming supply switching and isolation in compatible ABB Protecta Power 800 A busbar distribution panelboards.
£2,178.31
Why Choose the ABB EPX-8003SD 800A 3-Pole Switch Disconnector?
The ABB EPX-8003SD is a dedicated 800 A three-pole incoming switch disconnector designed for compatible ABB Protecta Power low-voltage electrical distribution panelboards. Based on the ABB Tmax XT6 device frame, this non-automatic switching device provides a manufacturer-specified solution for manually switching and isolating an incoming electrical supply. Its ABB order code is 1TVS151800S3374, and its official product description is EPX-8003SD 800A 3P SD - XT6.
Part of the ABB Protecta Power Enclosures product group, the EPX-8003SD combines an 800 A rated current with a three-pole configuration for suitable three-phase electrical distribution arrangements. It is intended for installations where the incoming supply requires a switch disconnector rather than a moulded case circuit breaker incorporating automatic overload and short-circuit protection.
ABB lists the EPX-8003SD among its non-automatic incoming switch disconnectors for Protecta Power 800 A busbar panelboards. The product pack contains the incoming device, while the corresponding connection kit and any additional terminal accessories must be selected according to the intended panelboard arrangement. This makes the EPX-8003SD suitable for electrical contractors, switchboard manufacturers and panel builders specifying coordinated ABB power distribution equipment.
Key Advantages
- Purpose-designed 800 A incoming switch disconnector for compatible ABB Protecta Power panelboards.
- Uses the established ABB Tmax XT6 device frame.
- Three-pole switching configuration for suitable three-phase electrical distribution systems.
- Provides manual incoming supply switching and isolation functionality when correctly installed.
- Non-automatic operation for applications requiring a switch disconnector rather than an MCCB with automatic protection.
- Listed for compatible ABB Protecta Power 800 A busbar panelboards.
- Supports coordinated incoming switching arrangements in commercial and industrial distribution systems.
- Designed for use with an appropriately selected ABB XT6 incoming connection kit.
- Front extended terminal options are available for suitable cable lug connections.
- Part of ABB's coordinated Protecta Power incoming device and accessory range.
- Clearly identified by ABB order code 1TVS151800S3374 for accurate specification and procurement.
Key Features
- ABB Protecta Power Enclosures product family.
- EPX-8003SD incoming switch disconnector.
- 800 A rated current.
- Three-pole (3P) configuration.
- ABB Tmax XT6 device frame.
- Non-automatic switch disconnector design.
- Manual switching and isolation functionality.
- Designed for incoming supply applications in compatible low-voltage panelboards.
- Listed for Protecta Power 800 A busbar panelboard assemblies.
- Suitable for appropriately designed three-phase incoming supply arrangements.
- ABB lists an XT6 incoming device cable capacity of 2 × 120 mm², subject to the applicable terminal arrangement.
- Front extended terminals available separately for suitable lug connections.
- Pack contains the incoming switching device.
- Associated EPX-8003CK three-pole XT6 incoming connection kit available separately.
- Does not incorporate an automatic overload or short-circuit protection trip unit.
- Manufacturer model EPX-8003SD and ABB order code 1TVS151800S3374.
800A Three-Pole Incoming Switching for Protecta Power Distribution Systems
The ABB Protecta Power system provides a modular platform for low-voltage electrical distribution in commercial and industrial installations. Its 800 A busbar panelboard range accommodates different incoming switching and protective devices, allowing the assembly to be configured for the electrical installation's requirements. The EPX-8003SD is specifically identified as an 800 A three-pole XT6 non-automatic switch disconnector within this range.
A switch disconnector performs a different role from a moulded case circuit breaker. The EPX-8003SD is intended for manually switching and isolating an electrical supply and does not provide automatic overload or short-circuit tripping. Appropriate fault protection must therefore be provided elsewhere in the installation, with the switching device selected and coordinated according to its applicable electrical ratings and the complete system design.
The three-pole configuration is intended for switching the three phase conductors in a suitable three-phase supply arrangement. Neutral conductor treatment must be determined separately according to the installation's earthing system and applicable regulations. Where a four-pole switching arrangement is required, ABB lists the related EPX-8004SD XT6 switch disconnector.
ABB's Protecta Power selection information identifies a maximum cable capacity of 2 × 120 mm² for XT6 incoming devices. This manufacturer selection-guide value must be considered alongside the actual terminal configuration, conductor construction, cable termination method and installation conditions. ABB also offers front extended terminals for suitable lug connections, subject to the relevant device and assembly instructions.
For installation within a compatible Protecta Power panelboard, ABB lists the EPX-8003CK as the corresponding 800 A three-pole XT6 incoming connection kit. This connection kit provides the specified incomer support, shrouding and busbar connectivity components. The incoming switch disconnector and connection kit are distinct products, so both must be considered when specifying the complete assembly.
Related ABB Protecta Power incoming devices include the EPX-6303SD, a 630 A three-pole XT5 switch disconnector, and the EPX-8004SD, an 800 A four-pole XT6 switch disconnector. Where automatic overcurrent protection is required at the incomer, ABB also offers the EPX-8003MCCB and EPX-8003-E1-MCCB XT6 incoming circuit breaker options. Selection must reflect the required switching functionality, protective coordination and distribution assembly compatibility.
Typical Applications
- ABB Protecta Power incoming supply switching installations.
- 800 A three-pole incomer arrangements in compatible distribution panelboards.
- Commercial building main electrical distribution systems.
- Industrial low-voltage electrical distribution assemblies.
- Three-phase incoming supply switching and isolation applications.
- Incoming supply arrangements with separately coordinated overcurrent protection.
- Compatible ABB Protecta Power 800 A busbar panelboards.
- Electrical switchrooms and building services distribution installations.
- Switchboard manufacturing and electrical panel building projects.
- Distribution systems requiring non-automatic incoming switching.
- Compatible Protecta Power panelboard upgrades, modifications and refurbishment.
Technical Specifications
Tick the specs you need, then view products that match.
| Incomer | Main switch / isolator + MCCB | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Device Type | Incomer / Metering / Surge Kit | |
| Current | 800 A | |
| Product group | Protecta Power Enclosures | |
| Series | Protecta Power | |
| ABB order code | 1TVS151800S3374 | |
| Product type | Incoming switch disconnector | |
| Product category | Low-voltage electrical distribution switching devices | |
| Device classification | Non-automatic switch disconnector | |
| Rated current | 800 A | |
| Number of poles | 3 | |
| Pole configuration | 3P | |
| Device family | ABB Tmax XT | |
| Device frame | XT6 | |
| Switching arrangement | Manual | |
| Installation position | Incoming supply (incomer) | |
| Compatible panelboard family | ABB Protecta Power | |
| Panelboard range | Compatible 800 A busbar panelboards | |
| Maximum cable capacity listed for XT6 incoming devices | 2 × 120 mm², subject to terminal configuration | |
| Pack contents | Incoming switch disconnector device | |
| Associated connection kit | EPX-8003CK XT6 800 A three-pole incoming connection kit | |
| Additional terminal option | Front extended terminals for suitable lug connections | |
| Primary function | Incoming supply switching and isolation | |
| Electrical system | Low-voltage power distribution | |
| Manufacturer product description | EPX-8003SD 800A 3P SD - XT6 |
Frequently Asked Questions
What is the ABB EPX-8003SD used for?
The ABB EPX-8003SD is an 800 A three-pole incoming switch disconnector designed for compatible ABB Protecta Power electrical distribution panelboards. It provides non-automatic incoming supply switching and isolation functionality when correctly specified and installed.
Is the ABB EPX-8003SD a circuit breaker?
No. The EPX-8003SD is a non-automatic switch disconnector, not an MCCB with an automatic protection trip unit. It provides switching and isolation functionality, while overload and short-circuit protection must be addressed by appropriately selected protective devices within the electrical installation.
Which ABB device frame and panelboard range does the EPX-8003SD use?
The EPX-8003SD uses the ABB Tmax XT6 frame and has an 800 A three-pole configuration. ABB lists it among the non-automatic incoming switch disconnectors for compatible Protecta Power 800 A busbar panelboards.
Which connection kit and cable capacity apply to the ABB EPX-8003SD?
ABB lists the EPX-8003CK as the corresponding XT6 800 A three-pole incoming connection kit. ABB's Protecta Power selection information also lists a maximum XT6 incoming device cable capacity of 2 × 120 mm², subject to the terminal configuration, conductor arrangement and applicable installation instructions.
What is the ABB order code for the EPX-8003SD switch disconnector?
The manufacturer order code is 1TVS151800S3374, and the model reference is EPX-8003SD. These identifiers specify the ABB Protecta Power 800 A three-pole XT6 incoming switch disconnector.
Trusted ABB Power Distribution and Switching Solutions
ABB Protecta Power provides electrical contractors, panel builders and distribution system designers with a coordinated range of low-voltage panelboards, incoming switching devices and installation accessories. The EPX-8003SD combines an 800 A three-pole configuration with the ABB Tmax XT6 frame to support incoming supply switching and isolation within compatible Protecta Power 800 A busbar distribution assemblies.
