Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1TVS151800S3363 ABB EPX-4004SD Protecta Power 400A 4-Pole XT5 Switch Disconnector
ABB EPX-4004SD (1TVS151800S3363) 400 A four-pole Tmax XT5 incoming switch disconnector designed for manual switching and isolation in compatible ABB Protecta Power low-voltage distribution panelboards.
£1,240.90
Why Choose the ABB EPX-4004SD 400A Four-Pole Switch Disconnector?
The ABB EPX-4004SD is a purpose-designed 400 A four-pole switch disconnector for compatible ABB Protecta Power electrical distribution panelboards. Based on the ABB Tmax XT5 device platform, this incoming switching device provides a dedicated means of manually switching and isolating the electrical supply to a low-voltage distribution assembly.
Part of the ABB Protecta Power Enclosures range, the EPX-4004SD is designed for use as an incoming non-automatic switch disconnector within compatible 400 A panelboard configurations. Its four-pole (4P) arrangement supports switching of three-phase conductors and a neutral conductor where required by the approved installation design.
Developed for electrical contractors, switchgear manufacturers and panel builders, the EPX-4004SD provides a coordinated incoming switching solution for ABB Protecta Power distribution systems. With a 400 A current rating, XT5 frame configuration and manufacturer order code 1TVS151800S3363, this genuine ABB component is suitable for commercial and industrial power distribution installations requiring a compatible four-pole incoming switch disconnector.
Key Advantages
- Purpose-designed 400 A incoming switch disconnector for ABB Protecta Power panelboards.
- Four-pole (4P) configuration for suitable three-phase and neutral switching arrangements.
- Based on the established ABB Tmax XT5 device platform.
- Provides manual switching and isolation functionality within a correctly designed electrical distribution assembly.
- Designed for compatible 400 A Protecta Power panelboard configurations.
- Supports a coordinated incoming device arrangement using ABB components.
- Suitable for electrical installations requiring a non-automatic incoming switch disconnector.
- Helps simplify the specification of compatible incoming switching equipment.
- Supports professional panelboard construction, maintenance and refurbishment.
- Suitable for commercial, industrial and infrastructure electrical distribution systems.
- Provides an alternative to a three-pole incoming switch where four-pole switching is specified.
- Genuine ABB product with manufacturer order code 1TVS151800S3363.
Key Features
- ABB Protecta Power Enclosures product range.
- EPX-4004SD incoming switch disconnector.
- 400 A rated current.
- Four-pole (4P) switching configuration.
- ABB Tmax XT5 frame platform.
- Non-automatic switching device for compatible incoming supply arrangements.
- Designed for manual circuit switching and isolation.
- Suitable for compatible ABB Protecta Power 400 A panelboards.
- Supports three-phase distribution arrangements requiring four-pole switching.
- Designed for integration with the appropriate panelboard connection components.
- Suitable for low-voltage electrical distribution installations.
- Intended for professional electrical panel building and switchgear assembly.
- Manufacturer identification code 1TVS151800S3363.
Reliable 400A Incoming Switching with ABB Tmax XT5 Technology
The incoming device is an important part of a low-voltage electrical distribution panelboard. It provides a designated switching point between the incoming electrical supply and the distribution system, supporting controlled operation and electrical isolation when installed and used in accordance with the applicable safety procedures.
The ABB EPX-4004SD is designed for this role within compatible 400 A ABB Protecta Power panelboards. Its XT5 four-pole configuration provides switching functionality for installations where the electrical design requires three-phase conductors and a neutral conductor to be switched together.
ABB identifies the EPX-4004SD as a non-automatic switch disconnector, distinguishing it from the MCCB incoming devices also available for the Protecta Power system. A switch disconnector provides switching and isolation functionality but does not independently provide the automatic overload or short-circuit protection associated with an appropriately specified circuit breaker.
The ABB Protecta Power range includes 250 A XT4 and 400 A XT5 incoming switch disconnectors in three-pole and four-pole configurations. For a 400 A installation, the EPX-4003SD provides the three-pole XT5 option, while the EPX-4004SD provides the four-pole XT5 option. Selecting the appropriate pole configuration is essential for compatibility with the electrical supply arrangement and installation requirements.
The Protecta Power 400 A panelboard range includes 8-way, 12-way and 18-way configurations. The EPX-4004SD is intended for compatible incoming arrangements within this range, subject to the approved panelboard design and the correct connection accessories.
ABB's Protecta Power product selection information identifies a maximum XT5 incoming cable capacity of 185 mm² for the relevant incoming device arrangement. Actual conductor suitability depends on the selected terminals, cable type, installation conditions and manufacturer's instructions. The complete installation must also include the necessary upstream or associated overcurrent protection and comply with the applicable electrical standards.
Typical Applications
- ABB Protecta Power 400 A electrical distribution panelboards.
- Four-pole incoming supply switching and isolation.
- Compatible ABB Tmax XT5 incoming device arrangements.
- Commercial building main and sub-distribution systems.
- Industrial low-voltage power distribution installations.
- Three-phase electrical distribution systems requiring neutral switching.
- Electrical switchrooms and panelboard assemblies.
- Manufacturing facilities and industrial production sites.
- Warehouses, logistics centres and distribution facilities.
- Office buildings, retail premises and commercial developments.
- Institutional buildings and electrical infrastructure projects.
- Electrical panel building and switchgear manufacturing.
- Protecta Power incoming device replacement and refurbishment.
- Distribution systems requiring a non-automatic incoming switch disconnector.
Technical Specifications
Tick the specs you need, then view products that match.
| Current | 400 A | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product group | Protecta Power Enclosures | |
| Series | Protecta Power | |
| ABB order code | 1TVS151800S3363 | |
| Manufacturer product description | 400A 4P SD - XT5 | |
| Product type | Switch disconnector | |
| Device category | Incoming non-automatic switching device | |
| Rated current | 400 A | |
| Number of poles | 4P (four-pole) | |
| Device frame | ABB Tmax XT5 | |
| Operating principle | Manual switching | |
| Automatic overcurrent tripping | Not provided by the switch disconnector | |
| Primary function | Incoming circuit switching and isolation | |
| Compatible system | ABB Protecta Power | |
| Panelboard current configuration | 400 A | |
| Installation position | Incoming supply section | |
| Associated connection accessory | EPX-4004CK four-pole XT5 connection kit, where required by the assembly configuration | |
| System type | Low-voltage electrical power distribution | |
| Application | Commercial and industrial electrical distribution | |
| Product classification | Four-pole incoming switch disconnector |
Frequently Asked Questions
What is the ABB EPX-4004SD used for?
The ABB EPX-4004SD is a 400 A four-pole incoming switch disconnector designed for compatible ABB Protecta Power electrical distribution panelboards. It provides manual switching and isolation functionality for the incoming electrical supply.
What is the current rating of the ABB EPX-4004SD?
The EPX-4004SD has a rated current of 400 A. It uses the ABB Tmax XT5 device platform and is intended for compatible 400 A Protecta Power incoming distribution arrangements.
What does 4P mean on the ABB EPX-4004SD?
4P means four-pole. The EPX-4004SD provides a four-pole switching configuration suitable for electrical designs requiring switching of three-phase conductors and a neutral conductor, subject to the installation's earthing and neutral switching requirements.
Does the ABB EPX-4004SD provide overload or short-circuit protection?
No. The EPX-4004SD is a non-automatic switch disconnector, not an automatic MCCB protective device. It provides switching and isolation functionality, while overload and short-circuit protection must be provided by appropriately selected protective equipment elsewhere in the electrical installation.
Which ABB Protecta Power panelboards are compatible with the EPX-4004SD?
The EPX-4004SD is listed as a 400 A, four-pole XT5 incoming switch disconnector for the ABB Protecta Power 400 A panelboard range, which includes 8-way, 12-way and 18-way configurations. The appropriate incoming connection kit and complete assembly compatibility should be confirmed before installation.
Trusted by Electrical Contractors and Panel Builders Worldwide
ABB Protecta Power distribution solutions provide flexible and coordinated low-voltage electrical distribution for commercial and industrial installations. The EPX-4004SD combines a 400 A current rating with four-pole ABB Tmax XT5 switch disconnector technology, supporting professional incoming supply switching and isolation within compatible Protecta Power panelboard assemblies.
