Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV327044S0001 ABB EPX-CBXT4-4P MCCB Cover Blank XT4 4P Protecta Power
ABB EPX-CBXT4-4P (1SKV327044S0001) is a four-pole Tmax XT4 MCCB cover blank designed for compatible unused circuit breaker positions within ABB Protecta Power low-voltage distribution assemblies.
£29.42
Why Choose the ABB EPX-CBXT4-4P MCCB Cover Blank XT4 4P?
The ABB EPX-CBXT4-4P (1SKV327044S0001) is a dedicated four-pole MCCB cover blank for compatible ABB Tmax XT4 arrangements within the ABB Protecta Power low-voltage electrical distribution system. This enclosure accessory is designed to cover a designated XT4 four-pole circuit breaker position when the corresponding opening is not occupied by an installed device.
Identified by the manufacturer as EPX-CBXT4-4P MCCB Cover Blank XT4 4P, the accessory features a four-pole (4P) configuration associated with the ABB Tmax XT4 moulded case circuit breaker family. Its purpose is to provide a suitable blanking component for compatible Protecta Power distribution assemblies, supporting an organised panel layout and the intended enclosure covering arrangement.
The ABB EPX-CBXT4-4P is suitable for professional electrical panel builders, switchgear manufacturers and maintenance engineers requiring a manufacturer-specific blanking accessory. Its defined XT4 and 4P designations help distinguish it from cover blanks intended for other circuit breaker sizes and pole configurations.
Key Advantages
- Designed for ABB Protecta Power low-voltage distribution assemblies.
- Dedicated MCCB cover blank for ABB Tmax XT4 arrangements.
- Four-pole (4P) configuration for the specified application.
- Provides a physical covering for compatible unused MCCB positions.
- Supports neat and organised electrical distribution board layouts.
- Helps maintain the intended covering arrangement of modular switchboards.
- Suitable for distribution board construction, modification and refurbishment.
- Manufacturer-specific identification supports accurate component selection.
Key Features
- ABB Protecta Power enclosure accessory.
- EPX-CBXT4-4P product model.
- MCCB cover blank component.
- ABB Tmax XT4 circuit breaker family designation.
- Four-pole (4P) configuration.
- Intended for compatible XT4 MCCB openings within Protecta Power assemblies.
- Provides a blanking solution for designated unoccupied circuit breaker positions.
- Passive mechanical accessory without electrical switching functionality.
- Suitable for modular switchboard assembly and replacement applications.
- ABB manufacturer order code 1SKV327044S0001.
Dedicated XT4 Four-Pole Blanking for Modular Distribution Boards
Low-voltage distribution assemblies may contain spare positions allocated for moulded case circuit breakers. When these positions remain unused, appropriately selected cover blanks help close the corresponding openings and maintain the intended physical covering arrangement. Selecting a blank specifically designated for the circuit breaker family and pole configuration is important because different MCCB arrangements may require different panel openings.
The ABB EPX-CBXT4-4P is identified for an XT4 four-pole MCCB arrangement within the Protecta Power enclosure system. It provides a dedicated blanking option for compatible installations without functioning as a circuit breaker itself. The correct mounting arrangement, enclosure compatibility and degree of protection must be verified against the applicable ABB assembly documentation.
Typical Applications
- ABB Protecta Power low-voltage distribution assemblies.
- Blanking compatible four-pole Tmax XT4 MCCB positions.
- Industrial electrical distribution switchboards.
- Commercial building power distribution panels.
- Modular switchboard construction and assembly.
- Distribution board modifications involving unused MCCB openings.
- Replacement of compatible XT4 four-pole cover blanks.
- Electrical switchgear refurbishment and maintenance.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | ABB Protecta Power | |
|---|---|---|
| Device Type | Door / Cover / Partition | |
| Product range | Protecta Power | |
| ABB order code | 1SKV327044S0001 | |
| Product designation | MCCB Cover Blank XT4 4P | |
| Product type | MCCB enclosure cover blank | |
| Associated circuit breaker family | ABB Tmax XT4 | |
| Number of poles | 4 | |
| Pole configuration | Four-pole (4P) | |
| Primary function | Covering compatible unused XT4 MCCB openings | |
| Installation application | Low-voltage electrical distribution assemblies | |
| Compatible enclosure range | ABB Protecta Power | |
| Electrical function | Passive blanking component | |
| Component classification | Electrical enclosure cover accessory | |
| Product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-CBXT4-4P used for?
The ABB EPX-CBXT4-4P is an MCCB cover blank intended to cover compatible unused four-pole ABB Tmax XT4 circuit breaker positions within Protecta Power electrical distribution assemblies.
Which ABB circuit breaker family is associated with the EPX-CBXT4-4P?
The EPX-CBXT4-4P is specifically designated for the ABB Tmax XT4 moulded case circuit breaker family.
What does 4P mean on the EPX-CBXT4-4P?
The 4P designation identifies a four-pole configuration, indicating that the cover blank is intended for a compatible XT4 four-pole MCCB position.
Is the ABB EPX-CBXT4-4P a complete circuit breaker?
No. The EPX-CBXT4-4P is a passive enclosure cover blank. It does not provide circuit switching, overload protection or short-circuit protection.
Can the EPX-CBXT4-4P be used with other MCCB models?
The product is specifically identified for XT4 four-pole arrangements. Compatibility with other MCCB families or configurations should not be assumed.
Does the EPX-CBXT4-4P have its own IP protection rating?
The supplied product designation does not establish an individual IP rating. The protection rating depends on the complete enclosure assembly and correct installation of the relevant covering components.
What is the ABB manufacturer order code for the EPX-CBXT4-4P?
The ABB manufacturer order code is 1SKV327044S0001, corresponding to the EPX-CBXT4-4P MCCB Cover Blank XT4 4P.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB Protecta Power enclosure accessories support professional low-voltage electrical distribution board construction, modification and maintenance. The ABB EPX-CBXT4-4P provides a manufacturer-specific cover blank for compatible four-pole Tmax XT4 MCCB positions, helping electrical panel builders maintain organised switchboard layouts and coordinated enclosure assembly.
