Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV327031S0001 ABB EPX-CBXT1-3P Protecta Power XT1 3-Pole MCCB Cover Blank
ABB EPX-CBXT1-3P 1SKV327031S0001 is a Protecta Power MCCB cover blank designed to close unused ABB Tmax XT1 three-pole circuit breaker openings in compatible low-voltage electrical distribution enclosures.
£20.45
Why Choose the ABB EPX-CBXT1-3P MCCB Cover Blank?
The ABB EPX-CBXT1-3P, manufacturer order code 1SKV327031S0001, is a dedicated MCCB cover blank for ABB Tmax XT1 three-pole circuit breaker positions within compatible ABB Protecta Power electrical distribution enclosures. Designed to cover an unused XT1 3P outgoing device opening, this accessory helps complete the distribution board's front cover arrangement when a circuit breaker is not installed in the designated position.
As part of the ABB Protecta Power Enclosures accessory range, the EPX-CBXT1-3P supports professional low-voltage switchboard assembly, enclosure finishing and circuit configuration changes. Its dedicated XT1 three-pole format allows panel builders to select a blanking component corresponding to the intended MCCB position rather than using a general-purpose cover.
The EPX-CBXT1-3P is a mechanical cover accessory, not a circuit breaker, mounting base or protective device. It is intended for compatible ABB Protecta Power arrangements incorporating outgoing positions designed for ABB Tmax XT1 3P moulded case circuit breakers.
Key Advantages
- Purpose-designed MCCB cover blank for ABB Tmax XT1 three-pole positions.
- Compatible with designated ABB Protecta Power distribution enclosure arrangements.
- Helps cover unused outgoing MCCB openings.
- Supports a neat and consistent distribution board front cover layout.
- Provides a dedicated blanking solution for the XT1 3P device format.
- Useful when outgoing circuit breaker positions are reserved for future installation.
- Supports compatible switchboard modifications and circuit rearrangements.
- Part of the coordinated ABB Protecta Power accessory system.
- Suitable for commercial and industrial low-voltage distribution projects.
- Allows unused MCCB positions to be finished without installing an unnecessary circuit breaker.
Key Features
- ABB Protecta Power MCCB cover blank.
- EPX-CBXT1-3P model designation.
- Manufacturer order code 1SKV327031S0001.
- Designed for ABB Tmax XT1 outgoing MCCB positions.
- Three-pole (3P) configuration.
- Dedicated blanking component for an unused XT1 circuit breaker opening.
- Intended for compatible ABB Protecta Power front cover arrangements.
- Mechanical enclosure accessory without an integrated circuit breaker.
- Supports coordinated distribution board construction and finishing.
- Suitable for professional electrical panel building and refurbishment.
Dedicated Blanking for ABB Tmax XT1 Three-Pole MCCB Positions
Low-voltage distribution boards are often designed with more outgoing circuit breaker positions than are initially required. Where an MCCB position remains unused, a compatible blanking accessory can be fitted to complete the front cover arrangement. The ABB EPX-CBXT1-3P is specifically identified for Tmax XT1 three-pole MCCB positions within the Protecta Power enclosure system.
The ABB Tmax XT1 is a compact moulded case circuit breaker family used in low-voltage distribution applications. Three-pole XT1 devices are designed for three-phase circuit arrangements, and their installation requires appropriately selected mounting and cover components. The EPX-CBXT1-3P serves a different purpose from an MCCB base plate and cover: it is intended to blank an unused device opening, not to mount an operational circuit breaker.
When selecting this accessory, installers should confirm that the existing enclosure has the appropriate XT1 3P cover opening and that the blank is compatible with the specific ABB Protecta Power assembly. The completed cover arrangement must meet the applicable requirements for access to live parts and the enclosure's intended protection characteristics. The cover blank itself does not establish an independent ingress protection or electrical rating.
Typical Applications
- ABB Protecta Power low-voltage electrical distribution boards.
- Blanking unused ABB Tmax XT1 three-pole MCCB positions.
- Outgoing circuit breaker cover completion.
- Commercial building electrical distribution installations.
- Industrial switchboard and panelboard assemblies.
- Electrical panel manufacturing and assembly projects.
- Distribution boards with reserved outgoing MCCB positions.
- Building services and electrical plant room installations.
- Compatible circuit breaker layout modifications.
- ABB Protecta Power enclosure maintenance and refurbishment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV327031S0001 | |
| Product description | EPX-CBXT1-3P MCCB Cover Blank XT1 3P | |
| Product type | MCCB cover blank | |
| Accessory category | Electrical distribution enclosure blanking accessories | |
| Associated circuit breaker family | ABB Tmax XT1 | |
| Associated device type | Moulded case circuit breaker (MCCB) | |
| Pole configuration | 3-pole (3P) | |
| Primary function | Blanking an unused XT1 3P MCCB cover opening | |
| Installation location | Compatible outgoing MCCB cover position | |
| Compatible enclosure family | ABB Protecta Power | |
| Product format | Mechanical enclosure cover accessory | |
| Electrical switching function | None | |
| Electrical protection function | None | |
| Application | Low-voltage electrical distribution assembly finishing | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-CBXT1-3P used for?
The ABB EPX-CBXT1-3P is an MCCB cover blank used to cover an unused ABB Tmax XT1 three-pole circuit breaker opening within a compatible ABB Protecta Power distribution enclosure.
Which ABB circuit breaker position does the EPX-CBXT1-3P fit?
The accessory is designed for a designated ABB Tmax XT1 three-pole (3P) MCCB position. The exact Protecta Power enclosure and cover arrangement should be checked before installation.
Does the ABB EPX-CBXT1-3P include a circuit breaker?
No. The EPX-CBXT1-3P is a cover blank only. It does not include an ABB Tmax XT1 MCCB, trip unit or circuit breaker mounting assembly.
What is the difference between an MCCB cover blank and a base plate and cover?
An MCCB cover blank is used to close an unused circuit breaker opening. An MCCB base plate and cover is used as part of the installation arrangement for a compatible circuit breaker. The correct accessory depends on whether the outgoing MCCB position is occupied or vacant.
Can the EPX-CBXT1-3P be used when a circuit breaker position is reserved for future expansion?
Yes, where the enclosure arrangement is compatible, the EPX-CBXT1-3P can be used to blank an unused XT1 three-pole opening until the position is required. Any subsequent circuit breaker installation must use the appropriate ABB mounting, cover and electrical connection components.
Trusted ABB Power Distribution Accessories
ABB Protecta Power provides a coordinated range of low-voltage distribution enclosures and installation accessories for commercial and industrial electrical systems. The ABB EPX-CBXT1-3P offers a dedicated blanking solution for unused Tmax XT1 three-pole MCCB positions, supporting organised and consistent distribution board assembly.
