Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV324200S0001 ABB EPX-SED18 Side Extension Plain Door 2000 x 300mm 18-Way Protecta Power
ABB EPX-SED18 (1SKV324200S0001) is a 2000 mm high by 300 mm wide plain side extension door designed for compatible 18-way ABB Protecta Power electrical distribution panelboard enclosures.
£1,434.31
Why Choose the ABB EPX-SED18 Side Extension Plain Door?
The ABB EPX-SED18, manufacturer order code 1SKV324200S0001, is a purpose-designed side extension plain door for compatible ABB Protecta Power low-voltage electrical distribution panelboards. With nominal dimensions of 2000 mm high x 300 mm wide, this enclosure accessory is specified for the side extension arrangement associated with 18-way Protecta Power panelboards.
As part of the ABB Protecta Power Enclosures product range, the EPX-SED18 provides a manufacturer-designated door solution for suitable side extension compartments. It supports the completion of modular panelboard assemblies where additional enclosure space is required for cable routing, electrical distribution accessories or other equipment permitted by the relevant ABB configuration.
The plain door configuration provides an enclosed front access arrangement without the dedicated metering provision associated with ABB's separately listed metered door variants. This makes the EPX-SED18 an appropriate selection for compatible side extension installations where a standard, non-metered door is specified.
Designed for professional panel builders, switchgear manufacturers and electrical contractors, the ABB EPX-SED18 supports consistent enclosure assembly and straightforward component identification. Its dedicated product designation and ABB order code help ensure that the correct door size and configuration are selected for the intended Protecta Power installation.
Key Advantages
- Purpose-designed plain side extension door for ABB Protecta Power panelboards.
- Specified for compatible 18-way panelboard configurations.
- 2000 mm height to match the corresponding 18-way side extension arrangement.
- 300 mm width for the designated side extension compartment.
- Plain, non-metered door configuration for applications without a dedicated door-mounted meter provision.
- Provides an appropriate front closure for compatible side extension enclosures.
- Supports professional panelboard assembly, access and maintenance planning.
- Manufacturer-specific accessory for consistent integration with ABB Protecta Power equipment.
- Suitable for new installations and compatible enclosure refurbishment projects.
- Dedicated ABB order code 1SKV324200S0001 simplifies product identification and procurement.
Key Features
- ABB Protecta Power Enclosures product family.
- EPX-SED18 side extension plain door.
- Designed for compatible 18-way Protecta Power panelboards.
- Nominal height: 2000 mm.
- Nominal width: 300 mm.
- Plain door configuration without a dedicated metering provision.
- Intended for the corresponding Protecta Power side extension compartment.
- Supports access to the side extension space when installed in a suitable enclosure assembly.
- Part of ABB's modular low-voltage distribution enclosure accessory range.
- Distinct from the EPX-SED18M metered side extension door.
- Installation subject to the applicable ABB enclosure, hinge and locking arrangements.
- ABB manufacturer order code 1SKV324200S0001.
Side Extension Door Integration for ABB Protecta Power Panelboards
The ABB Protecta Power range provides modular low-voltage electrical distribution panelboard solutions for commercial and industrial installations. The system incorporates enclosure structures, incoming and outgoing protective devices, busbar assemblies and dedicated accessories for configuring complete electrical distribution equipment.
Side extension compartments can provide additional space alongside a compatible panelboard assembly. Depending on the approved configuration, this space may be used to accommodate cable routing, termination arrangements or other designated enclosure components. A correctly selected side extension door forms part of the compartment's external enclosure arrangement.
The ABB EPX-SED18 is identified in ABB's Protecta Power product selection documentation as the Side Extension Plain Door H2000 x W300 (18-way panelboard). Its nominal dimensions of 2000 mm x 300 mm distinguish it from the smaller side extension door options intended for 8-way and 12-way assemblies.
ABB also lists the EPX-SED08 for compatible 8-way panelboards and the EPX-SED12 for compatible 12-way panelboards. These products have different nominal heights and should be selected according to the corresponding enclosure size rather than treated as interchangeable components.
For applications requiring a door with a dedicated metering provision, ABB separately identifies the EPX-SED18M side extension metered door. The EPX-SED18 is the plain version and should be selected where the specified assembly requires a non-metered side extension door.
The EPX-SED18 is an enclosure accessory rather than a complete side extension box. The corresponding side extension compartment, compatible door hardware and any additional installation components must be selected according to the relevant ABB product documentation. The door itself does not provide circuit protection, switching functionality or an independent electrical current rating.
The ingress protection and mechanical performance of the completed assembly depend on the enclosure configuration, door installation, hinges, locking arrangement and any applicable sealing components. Installers should follow ABB's assembly instructions and verify that the finished panelboard meets the electrical and environmental requirements of the installation.
Typical Applications
- ABB Protecta Power 18-way electrical distribution panelboards.
- Compatible 2000 mm high side extension enclosure arrangements.
- Commercial building low-voltage power distribution installations.
- Industrial electrical distribution panel construction.
- Side cableway and cable-management compartment enclosures.
- Main and sub-distribution panelboard assemblies.
- Electrical switchgear manufacturing and panel building.
- Non-metered side extension door installations.
- Compatible panelboard enclosure refurbishment and door replacement.
- OEM electrical distribution equipment assembly.
- Electrical plant room and switchgear enclosure installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product group | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV324200S0001 | |
| Manufacturer description | EPX-SED18 Side Extension Plain Door | |
| Product type | Side extension plain door | |
| Accessory category | Electrical distribution enclosure door accessory | |
| Door configuration | Plain, non-metered | |
| Nominal height | 2000 mm | |
| Nominal width | 300 mm | |
| Nominal door dimensions (H x W) | 2000 mm x 300 mm | |
| Associated panelboard configuration | 18-way | |
| Compatible product family | ABB Protecta Power | |
| Installation location | Compatible side extension enclosure | |
| Intended function | Side extension compartment door and access closure | |
| Associated equipment | Low-voltage electrical distribution panelboards | |
| System configuration | Modular electrical distribution enclosure | |
| Alternative metered door | EPX-SED18M | |
| Application sector | Commercial and industrial electrical distribution | |
| Installation requirement | Assembly in accordance with ABB Protecta Power instructions |
Frequently Asked Questions
What is the ABB EPX-SED18 used for?
The ABB EPX-SED18 is a plain side extension door designed for compatible ABB Protecta Power 18-way electrical distribution panelboards. It provides the designated door arrangement for a suitable side extension enclosure compartment.
What are the dimensions of the ABB EPX-SED18?
The EPX-SED18 has nominal dimensions of 2000 mm high x 300 mm wide. ABB specifies this size for the side extension plain door associated with compatible 18-way Protecta Power panelboards.
What is the difference between ABB EPX-SED18 and EPX-SED18M?
The EPX-SED18 is the plain side extension door, while the EPX-SED18M is the corresponding metered side extension door. Both are associated with compatible 18-way Protecta Power configurations, but the metered version provides a different door arrangement for installations requiring a dedicated metering provision.
Does the ABB EPX-SED18 include the complete side extension box?
No. The EPX-SED18 is a side extension door accessory, not a complete side extension enclosure. The compatible side extension box and any required hinges, locks or other installation components must be selected according to the applicable ABB Protecta Power assembly documentation.
Can the ABB EPX-SED18 be used with 8-way or 12-way Protecta Power panelboards?
The EPX-SED18 is specifically designated for the 18-way, 2000 mm high side extension arrangement. ABB separately lists the EPX-SED08 for compatible 8-way panelboards and the EPX-SED12 for compatible 12-way panelboards. The correct door should be selected according to the enclosure dimensions and ABB's compatibility guidance.
Trusted ABB Enclosure Accessories for Professional Panel Building
ABB Protecta Power provides modular electrical distribution solutions for professional commercial and industrial installations. The ABB EPX-SED18 Side Extension Plain Door, order code 1SKV324200S0001, offers a manufacturer-designated 2000 mm x 300 mm door for compatible 18-way side extension enclosures, supporting consistent component selection and professional integration within the Protecta Power panelboard system.
