Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV321200S0001 ABB EPX-VSG18 Protecta Power Vented Side Gland H2000 x D300
ABB EPX-VSG18 (1SKV321200S0001) vented side gland accessory designed for compatible ABB Protecta Power electrical distribution enclosures with a nominal height of 2000 mm and depth of 300 mm.
£244.25
Why Choose the ABB EPX-VSG18 Vented Side Gland Plate?
The ABB EPX-VSG18 is a purpose-designed vented side gland accessory for ABB Protecta Power electrical distribution enclosures. As part of the ABB Protecta Power Enclosures range, this component is intended for use with compatible enclosure configurations measuring 2000 mm in height and 300 mm in depth, providing a dedicated side gland arrangement with ventilation functionality for low-voltage electrical distribution installations.
Designed for electrical contractors, switchgear manufacturers and panel builders, the EPX-VSG18 supports the modular construction of ABB Protecta Power distribution assemblies. Its vented design provides an arrangement for air movement through the designated enclosure section, while the side gland configuration supports the integration of the enclosure into a professionally assembled electrical distribution system.
With compatibility specified for H2000 × D300 enclosure configurations, the EPX-VSG18 is suitable for selected ABB Protecta Power installations requiring a vented side gland arrangement. Identified by ABB order code 1SKV321200S0001, this genuine ABB accessory is intended for integration into compatible enclosure assemblies used in commercial and industrial electrical distribution applications.
Key Advantages
- Purpose-designed vented side gland accessory for ABB Protecta Power enclosures.
- Suitable for compatible enclosures with a 2000 mm nominal height.
- Designed for enclosure configurations with a 300 mm nominal depth.
- Vented construction supports airflow through the designated enclosure arrangement.
- Provides a dedicated side gland solution for compatible electrical distribution assemblies.
- Supports the modular ABB Protecta Power enclosure system.
- Helps electrical panel builders maintain a consistent and organised enclosure configuration.
- Suitable for commercial and industrial low-voltage power distribution installations.
- Genuine ABB accessory with manufacturer order code 1SKV321200S0001.
Key Features
- ABB Protecta Power Enclosures product range.
- EPX-VSG18 vented side gland accessory.
- 2000 mm nominal enclosure height compatibility.
- 300 mm nominal enclosure depth compatibility.
- Vented design for airflow within compatible enclosure arrangements.
- Side gland configuration for ABB Protecta Power electrical distribution systems.
- Designed for integration into compatible modular enclosure assemblies.
- Supports professional electrical panelboard and switchgear construction.
- Suitable for low-voltage electrical distribution installations.
- Dedicated accessory for the specified enclosure dimensions.
- Suitable for new enclosure assemblies and compatible refurbishment projects.
- Manufacturer identification code 1SKV321200S0001.
Reliable Ventilation and Enclosure Integration for Power Distribution
Electrical distribution enclosures are designed to accommodate circuit breakers, busbar systems, electrical connections and associated distribution equipment within a coordinated assembly. Depending on the equipment installed and the enclosure configuration, ventilation arrangements may be required to support appropriate internal operating conditions.
The ABB EPX-VSG18 provides a dedicated vented side gland arrangement for compatible ABB Protecta Power enclosures with a nominal height of 2000 mm and depth of 300 mm. Its vented construction allows air movement through the designated enclosure opening, supporting the ventilation arrangement specified for the completed electrical distribution assembly.
ABB Protecta Power systems use modular enclosure components to accommodate different electrical distribution configurations. Selecting accessories intended for the correct enclosure dimensions helps ensure suitable mechanical integration and simplifies the specification of components for new installations, extensions and refurbishment projects.
The EPX-VSG18 is an enclosure accessory rather than an electrical protection device or powered cooling system. The ventilation performance, thermal suitability and ingress protection of the completed assembly depend on the overall enclosure design, installed equipment and manufacturer's installation requirements. Appropriate consideration should be given to cable routing, environmental conditions and enclosure protection when specifying a vented gland arrangement.
Typical Applications
- ABB Protecta Power electrical distribution enclosures.
- Compatible 2000 mm high × 300 mm deep enclosure assemblies.
- Vented side gland arrangements in low-voltage distribution systems.
- Commercial building electrical distribution installations.
- Industrial switchgear and power distribution assemblies.
- Electrical switchrooms and distribution equipment installations.
- Manufacturing facilities and industrial infrastructure.
- Office buildings, retail premises and commercial developments.
- Warehouses, logistics centres and distribution facilities.
- Electrical panel building and switchgear assembly projects.
- Protecta Power enclosure refurbishment and reconfiguration.
- Electrical distribution installations requiring compatible side ventilation accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product group | Protecta Power Enclosures | |
| Series | Protecta Power | |
| ABB order code | 1SKV321200S0001 | |
| Product type | Vented side gland accessory | |
| Accessory category | Electrical distribution enclosure accessory | |
| Design | Vented side gland | |
| Compatible enclosure height | 2000 mm | |
| Compatible enclosure depth | 300 mm | |
| Enclosure configuration | H2000 × D300 | |
| Installation location | Compatible enclosure side gland position | |
| Compatible system | ABB Protecta Power | |
| Mounting application | Protecta Power electrical distribution enclosures | |
| Ventilation function | Airflow provision through the vented arrangement | |
| System type | Low-voltage electrical power distribution | |
| Application | Commercial and industrial electrical distribution | |
| Product classification | Vented enclosure gland accessory |
Frequently Asked Questions
What is the ABB EPX-VSG18 used for?
The ABB EPX-VSG18 is a vented side gland accessory designed for compatible ABB Protecta Power electrical distribution enclosures. It provides a dedicated side gland arrangement incorporating ventilation for the specified enclosure configuration.
What enclosure dimensions is the ABB EPX-VSG18 designed for?
The EPX-VSG18 is specified for compatible ABB Protecta Power enclosures with a nominal height of 2000 mm and a nominal depth of 300 mm. These dimensions identify the intended enclosure configuration rather than the physical dimensions of the accessory itself.
What is the purpose of the vented design?
The vented design provides an arrangement for air movement through the designated enclosure section. This can form part of the ventilation strategy for an electrical distribution assembly, subject to the enclosure design, environmental conditions and manufacturer's installation requirements.
Which electrical distribution systems are compatible with the EPX-VSG18?
The EPX-VSG18 belongs to the ABB Protecta Power Enclosures range and is intended for compatible Protecta Power configurations measuring 2000 mm in height and 300 mm in depth. The specific enclosure arrangement should be checked before installation.
Does the ABB EPX-VSG18 include an electrical fan or active cooling system?
The EPX-VSG18 is identified as a vented side gland accessory, not an electrically powered fan or active cooling unit. Its function is to provide a vented enclosure arrangement, and it should not be treated as a substitute for any additional cooling equipment required by the electrical installation.
Trusted by Electrical Contractors and Panel Builders Worldwide
ABB Protecta Power enclosure solutions support flexible and professional electrical distribution installations across commercial and industrial environments. The EPX-VSG18 vented side gland accessory provides a dedicated solution for compatible 2000 mm high and 300 mm deep enclosure configurations, supporting organised assembly, ventilation provision and integration within the ABB Protecta Power system.
