Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV312100S0001 ABB EPX-CB010 Protecta Power Cover Blank Size 10 10 mm
ABB EPX-CB010 1SKV312100S0001 is a 10 mm Protecta Power cover blank designed to fill unused ways or spaces in the outgoing section of compatible ABB electrical distribution enclosures.
£10.83
Why Choose the ABB EPX-CB010 Cover Blank Size 10?
The ABB EPX-CB010, manufacturer order code 1SKV312100S0001, is a dedicated 10 mm cover blank for ABB Protecta Power electrical distribution enclosures. Designed to fill unused spaces within the outgoing section of compatible distribution boards, this accessory helps provide a neat, continuous cover arrangement where an outgoing circuit breaker or other device is not installed.
As part of the ABB Protecta Power enclosure accessory range, the EPX-CB010 supports professional assembly and finishing of low-voltage distribution boards. Its compact 10 mm nominal size makes it suitable for filling small unused openings in compatible outgoing cover arrangements, helping panel builders achieve a coordinated appearance and appropriate coverage of vacant positions.
ABB lists the EPX-CB010 under its blanking plates for unused ways category, alongside other cover blank sizes for the Protecta Power system. The product is a mechanical enclosure accessory rather than an electrical protection device and is intended to be fitted in accordance with the applicable ABB enclosure assembly instructions.
Key Advantages
- Purpose-designed 10 mm cover blank for ABB Protecta Power distribution boards.
- Fills unused spaces within compatible outgoing distribution sections.
- Helps maintain a neat, consistent enclosure cover arrangement.
- Supports appropriate coverage of vacant outgoing device positions.
- Part of the coordinated ABB Protecta Power accessory system.
- Compact size suitable for small gaps in compatible cover layouts.
- Helps panel builders complete distribution assemblies without leaving unnecessary openings.
- Suitable for new electrical distribution board construction.
- Useful for compatible switchboard modification and refurbishment projects.
- Manufacturer-designated accessory for consistent enclosure integration.
Key Features
- ABB Protecta Power cover blank.
- EPX-CB010 model designation.
- Manufacturer order code 1SKV312100S0001.
- Manufacturer description: Cover blank Size 10.
- 10 mm nominal blanking size.
- Designed for unused spaces in outgoing distribution sections.
- Compatible with the designated ABB Protecta Power cover system.
- Mechanical blanking accessory without electrical switching or protection functions.
- Forms part of ABB's range of modular cover blank sizes.
- Supports a coordinated distribution board appearance.
- Suitable for installation during enclosure assembly or compatible modifications.
- Intended for use by qualified electrical installers and panel builders.
Cover Blanking for Unused Outgoing Distribution Spaces
Electrical distribution boards often contain unused outgoing positions when an installation does not require every available circuit location. These spaces should be appropriately covered using accessories compatible with the enclosure design. The ABB EPX-CB010 provides a 10 mm blanking option for the outgoing section of ABB Protecta Power distribution assemblies.
The ABB Protecta Power system includes dedicated blanking plates for different outgoing device arrangements and unused spaces. In addition to the EPX-CB010, ABB lists the EPX-CB020, EPX-CB030, EPX-CB040, EPX-CB050, EPX-CB100, EPX-CB150 and EPX-CB200 as alternative blanking sizes. This range allows installers to select cover blanks according to the unused space within the designated outgoing section.
The EPX-CB010 is intended to complete the physical cover arrangement of a compatible distribution board. It does not provide circuit protection, switching or electrical isolation. Installers should verify the required opening size, cover compatibility, fixing method and completed assembly requirements before fitting the accessory.
Typical Applications
- ABB Protecta Power low-voltage electrical distribution boards.
- Blanking unused outgoing ways within compatible enclosures.
- Covering small vacant spaces in distribution board outgoing sections.
- Commercial building electrical distribution installations.
- Industrial low-voltage switchboard assemblies.
- Electrical panel building and enclosure assembly projects.
- Distribution board finishing and cover completion.
- Building services and electrical plant room installations.
- Compatible distribution board modifications and circuit rearrangements.
- ABB Protecta Power maintenance and refurbishment projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV312100S0001 | |
| Product description | EPX-CB010 Cover Blank Size 10 | |
| Product type | Cover blank / blanking plate | |
| Accessory category | Electrical distribution enclosure blanking accessories | |
| Nominal blanking size | 10 mm | |
| Application location | Outgoing section of compatible distribution boards | |
| Primary function | Filling unused outgoing ways or cover spaces | |
| Compatible enclosure family | ABB Protecta Power | |
| Product format | Mechanical enclosure cover accessory | |
| Electrical function | None | |
| Application environment | Low-voltage electrical distribution assemblies | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-CB010 used for?
The ABB EPX-CB010 is a cover blank used to fill unused ways or spaces in the outgoing section of compatible ABB Protecta Power electrical distribution boards.
What size is the ABB EPX-CB010 cover blank?
The EPX-CB010 has a manufacturer-specified nominal blanking size of 10 mm. It is listed in ABB's Protecta Power catalogue as Cover blank Size 10.
Which ABB enclosure range is compatible with the EPX-CB010?
The EPX-CB010 belongs to the ABB Protecta Power enclosure accessory range and is intended for compatible outgoing distribution cover arrangements. The specific enclosure and opening configuration should be checked before installation.
Are other sizes of ABB Protecta Power cover blanks available?
Yes. ABB lists additional Protecta Power cover blanks in nominal sizes of 20 mm, 30 mm, 40 mm, 50 mm, 100 mm, 150 mm and 200 mm, allowing the appropriate blanking size to be selected for the unused space.
Does the ABB EPX-CB010 provide electrical protection?
No. The EPX-CB010 is a mechanical cover blank, not a circuit breaker or protective device. It is used to cover unused enclosure openings, while electrical protection is provided by the separately installed equipment within the distribution assembly.
Trusted ABB Power Distribution Solutions
ABB Protecta Power distribution systems offer a coordinated range of enclosures, circuit breaker arrangements and installation accessories for commercial and industrial electrical installations. The ABB EPX-CB010 provides a dedicated 10 mm blanking solution for unused outgoing spaces, supporting neat and consistent distribution board assembly.
