Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV311020S0001 ABB EPX-LIFT2 Protecta Power Double Lifting Bolts with Accessories
ABB EPX-LIFT2 1SKV311020S0001 is a double lifting bolt accessory with associated fittings designed for manufacturer-approved lifting and positioning arrangements on compatible ABB Protecta Power electrical distribution enclosures.
£27.58
Why Choose the ABB EPX-LIFT2 Double Lifting Bolts?
The ABB EPX-LIFT2, manufacturer order code 1SKV311020S0001, is a dedicated double lifting bolt accessory for ABB Protecta Power electrical distribution enclosures. Designed as part of the ABB Protecta Power enclosure accessory range, this lifting arrangement supports the controlled handling and positioning of compatible low-voltage distribution assemblies during installation and associated assembly operations.
As part of the ABB Protecta Power power distribution system, the EPX-LIFT2 provides a manufacturer-designated lifting accessory for compatible electrical enclosures. The double lifting bolt arrangement is intended to provide suitable lifting attachment points when used with the appropriate enclosure configuration, lifting equipment and installation procedures.
The ABB EPX-LIFT2 is identified in ABB's Protecta Power accessories range as Double Lifting Bolt with Accessories. It is intended for applications where a compatible distribution enclosure requires the designated double lifting bolt arrangement for handling and positioning. The accessory is supplied separately from the electrical distribution enclosure and must be used in accordance with the applicable ABB installation instructions and verified lifting requirements.
Key Advantages
- Purpose-designed double lifting bolt accessory for ABB Protecta Power enclosures.
- Provides a manufacturer-designated lifting attachment arrangement for compatible distribution assemblies.
- Supports controlled handling and positioning during electrical enclosure installation.
- Part of the coordinated ABB Protecta Power enclosure accessory range.
- Suitable for compatible low-voltage electrical distribution enclosures.
- Helps electrical contractors and panel builders prepare enclosures for planned lifting operations.
- Dedicated accessory for enclosure handling rather than electrical switching or protection.
- Can support installation and relocation activities where approved by the enclosure manufacturer.
- Allows the specified ABB lifting arrangement to be selected separately from the enclosure.
- Suitable for professional electrical distribution assembly and installation projects.
Key Features
- ABB Protecta Power double lifting bolt accessory.
- EPX-LIFT2 model designation.
- Manufacturer order code 1SKV311020S0001.
- Manufacturer catalogue description: Double Lifting Bolt with Accessories.
- Designed for compatible ABB Protecta Power distribution enclosures.
- Provides a dedicated mechanical lifting attachment arrangement.
- Intended for enclosure handling and installation operations.
- Part of the ABB Protecta Power installation accessory portfolio.
- Suitable for use with appropriately selected and rated lifting equipment.
- Requires verification of enclosure compatibility and lifting arrangements before use.
- Mechanical accessory without electrical switching, measurement or protection functions.
- Designed for installation and use by suitably trained personnel.
Practical Lifting Arrangements for Electrical Distribution Enclosures
Low-voltage electrical distribution enclosures can require mechanical lifting arrangements during transportation within an installation site, final positioning and switchboard assembly. Appropriate lifting accessories help installers connect suitable handling equipment to designated enclosure attachment points. The ABB EPX-LIFT2 provides the double lifting bolt accessory specified within the ABB Protecta Power range.
The ABB Protecta Power system includes coordinated distribution enclosures, circuit breaker arrangements, cable management components and installation accessories. ABB lists both the EPX-LIFT lifting bolt and EPX-LIFT2 double lifting bolt as separate accessory options, allowing the appropriate arrangement to be selected according to the applicable enclosure configuration.
Before lifting an enclosure, installers must verify the permitted lifting load, enclosure weight, centre of gravity, attachment positions and lifting equipment configuration. Any installed electrical components, cables or additional enclosure sections must be considered when determining whether the complete assembly can be lifted safely. The EPX-LIFT2 should only be used where the lifting method and attachment arrangement are approved for the specific ABB Protecta Power enclosure.
Typical Applications
- Handling compatible ABB Protecta Power electrical distribution enclosures.
- Low-voltage switchboard installation and positioning.
- Electrical panel building and enclosure assembly operations.
- Commercial building power distribution installations.
- Industrial electrical distribution enclosure installation.
- Positioning distribution assemblies within electrical plant rooms.
- Switchboard installation projects requiring designated lifting attachments.
- Electrical infrastructure construction and refurbishment.
- Handling compatible distribution enclosures during approved relocation operations.
- Professional installation of ABB Protecta Power equipment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV311020S0001 | |
| Product description | EPX-LIFT2 Double Lifting Bolts | |
| Manufacturer catalogue description | Double Lifting Bolt with Accessories | |
| Product type | Double lifting bolt accessory | |
| Accessory category | Electrical enclosure lifting accessories | |
| Lifting arrangement | Double lifting bolt | |
| Compatible enclosure family | ABB Protecta Power | |
| Primary function | Mechanical lifting attachment for compatible enclosures | |
| Application | Electrical enclosure handling and positioning | |
| Installation location | Designated enclosure lifting attachment positions | |
| Product format | Mechanical enclosure accessory | |
| Application environment | Low-voltage electrical distribution assemblies | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-LIFT2 used for?
The ABB EPX-LIFT2 is a double lifting bolt accessory designed to provide a designated mechanical lifting attachment arrangement for compatible ABB Protecta Power electrical distribution enclosures.
Which ABB enclosure range is compatible with the EPX-LIFT2?
The EPX-LIFT2 belongs to the ABB Protecta Power enclosure accessory range. Compatibility with a particular enclosure configuration and its designated lifting attachment positions must be confirmed before use.
What is the difference between ABB EPX-LIFT and EPX-LIFT2?
The EPX-LIFT is listed by ABB as a lifting bolt with accessories, while the EPX-LIFT2 is listed as a double lifting bolt with accessories. The appropriate option depends on the enclosure configuration and manufacturer-approved lifting arrangement.
Does the ABB EPX-LIFT2 include lifting accessories?
ABB identifies the EPX-LIFT2 in its Protecta Power catalogue as Double Lifting Bolt with Accessories. The exact supplied components should be checked against the manufacturer's current product documentation.
Can the ABB EPX-LIFT2 be used to lift a fully assembled distribution board?
Use with a fully assembled distribution board depends on the approved lifting capacity and configuration of the complete enclosure assembly. The total weight, installed equipment, centre of gravity and lifting method must be verified against ABB's installation instructions before lifting.
Trusted ABB Power Distribution Solutions
ABB Protecta Power provides a coordinated range of electrical distribution enclosures and installation accessories for commercial and industrial applications. The ABB EPX-LIFT2 double lifting bolt accessory supports manufacturer-designated lifting arrangements for compatible Protecta Power enclosures, helping professional installers prepare electrical distribution assemblies for controlled handling and positioning.
