Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV311010S0001 ABB EPX-LIFT Lifting Bolt with Accessories Protecta Power Enclosures
ABB EPX-LIFT (1SKV311010S0001) is a lifting bolt with accessories for approved lifting and positioning arrangements involving compatible ABB Protecta Power electrical distribution panelboard enclosures.
£14.26
Why Choose the ABB EPX-LIFT Lifting Bolt with Accessories?
The ABB EPX-LIFT, manufacturer order code 1SKV311010S0001, is a dedicated lifting bolt with accessories for compatible ABB Protecta Power electrical distribution enclosures. Designed as part of the ABB Protecta Power Enclosures product range, this lifting accessory supports the handling and positioning of suitable panelboard assemblies during professional installation and equipment assembly operations.
Moving electrical distribution enclosures requires careful planning, particularly where panelboards are large, heavy or difficult to position manually. The ABB EPX-LIFT lifting bolt accessory provides a manufacturer-designated component for approved lifting arrangements, helping panel builders and installation contractors prepare compatible Protecta Power enclosures for controlled handling using appropriate lifting equipment.
The EPX-LIFT is identified in ABB's Protecta Power accessories catalogue as a lifting bolt with accessories. It is listed separately from the EPX-LIFT2 double lifting bolt arrangement, allowing installers to identify the appropriate lifting accessory for the relevant enclosure configuration. Correct selection, installation and use must follow ABB's assembly instructions and the lifting requirements of the complete enclosure.
Key Advantages
- Purpose-designed lifting bolt accessory for ABB Protecta Power enclosures.
- Supports approved lifting and handling arrangements for compatible electrical distribution panelboards.
- Supplied as a lifting bolt with associated accessories.
- Manufacturer-designated component for use within the ABB Protecta Power system.
- Helps installers plan controlled enclosure positioning during assembly and installation.
- Suitable for professional panel-building, switchgear installation and enclosure-handling applications.
- Listed separately from the ABB EPX-LIFT2 double lifting bolt accessory for clear product selection.
- Dedicated ABB order code 1SKV311010S0001 simplifies identification, procurement and replacement.
Key Features
- ABB Protecta Power Enclosures product family.
- EPX-LIFT lifting bolt with accessories.
- Designed for compatible ABB Protecta Power panelboard enclosures.
- Dedicated lifting hardware for manufacturer-approved enclosure-handling arrangements.
- Supplied with associated accessories as described by ABB.
- Part of ABB's modular electrical distribution enclosure accessory range.
- Intended for use during appropriate enclosure lifting and positioning operations.
- Supports professional electrical panelboard assembly and installation workflows.
- Distinct from the EPX-LIFT2 double lifting bolt accessory.
- Installation and lifting suitability subject to ABB's relevant assembly instructions.
- ABB manufacturer order code 1SKV311010S0001.
Supporting Safe Lifting and Positioning of Protecta Power Enclosures
The ABB Protecta Power range provides modular low-voltage electrical distribution panelboards for commercial and industrial applications. The system includes enclosure structures, incoming and outgoing device arrangements, busbar assemblies and dedicated accessories that support the construction and installation of complete electrical distribution equipment.
The ABB EPX-LIFT is listed in ABB's Protecta Power product literature under enclosure accessories as a lifting bolt with accessories. Its purpose is to form part of a suitable lifting arrangement for compatible panelboard enclosures, providing a manufacturer-designated alternative to improvised attachment methods.
During electrical distribution panelboard installation, the complete enclosure may need to be moved from a transport position into its final installation location. Depending on the assembly, this may involve lifting equipment and specially designated lifting attachment points. Using the correct lifting accessory is an important part of preparing the enclosure for the intended handling operation.
The EPX-LIFT should be selected according to the specific Protecta Power enclosure configuration and the relevant ABB installation documentation. The number and arrangement of lifting attachments, the permitted lifting direction and the suitability of the enclosure for lifting depend on the manufacturer's instructions for the complete assembly.
ABB also lists the EPX-LIFT2 double lifting bolt with accessories as a separate Protecta Power product. The EPX-LIFT and EPX-LIFT2 are distinct accessory designations and should not be treated as interchangeable without confirming the applicable enclosure requirements.
The EPX-LIFT is a mechanical lifting accessory, not an electrical protection or switching device. It does not have an electrical current rating, short-circuit breaking capacity or trip function. Its suitability for any lifting operation must be assessed using the manufacturer's approved configuration, the actual enclosure mass and centre of gravity, and the relevant lifting equipment and safety procedures.
Before lifting, installers should verify the condition and correct installation of all lifting components, confirm that the intended lifting arrangement is approved for the assembly and ensure that the lifting equipment is appropriately rated. The product designation alone does not establish a safe working load, thread size or permitted lifting angle; these details must be obtained from the applicable ABB technical instructions.
Typical Applications
- Handling compatible ABB Protecta Power electrical distribution enclosures.
- Positioning low-voltage panelboard assemblies during installation.
- Professional electrical switchgear manufacturing and assembly.
- Commercial building electrical distribution projects.
- Industrial electrical distribution panel installation.
- Panelboard movement and positioning during site commissioning preparations.
- Enclosure installation within electrical plant rooms and switchgear areas.
- OEM electrical distribution equipment integration.
- Approved lifting arrangements during compatible panelboard refurbishment.
- Electrical contracting projects requiring manufacturer-specified enclosure lifting accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosure / Cabinet | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product group | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV311010S0001 | |
| Manufacturer description | EPX-LIFT Lifting bolt with accessories | |
| Product type | Lifting bolt with accessories | |
| Accessory category | Electrical enclosure lifting and handling accessory | |
| Compatible product family | ABB Protecta Power | |
| Intended application | Lifting and positioning compatible electrical distribution enclosures | |
| Associated equipment | Low-voltage electrical distribution panelboards | |
| System configuration | Modular electrical distribution enclosure | |
| Installation requirement | Manufacturer-approved lifting arrangement | |
| Related ABB accessory | EPX-LIFT2 double lifting bolt with accessories | |
| Application sector | Commercial and industrial electrical distribution | |
| Component category | Mechanical enclosure installation accessory |
Frequently Asked Questions
What is the ABB EPX-LIFT used for?
The ABB EPX-LIFT is a lifting bolt with accessories intended for use in approved lifting and handling arrangements for compatible ABB Protecta Power electrical distribution enclosures. It supports the positioning of suitable panelboard assemblies during professional installation operations.
Which ABB enclosure series is the EPX-LIFT designed for?
The EPX-LIFT belongs to the ABB Protecta Power Enclosures product family. Compatibility with a particular panelboard and lifting configuration must be verified against the relevant ABB assembly and installation documentation.
What is included with the ABB EPX-LIFT?
ABB identifies the product as a lifting bolt with accessories. The exact quantity, dimensions and individual accessory components should be confirmed from the applicable ABB product or installation documentation before assembly.
What is the difference between ABB EPX-LIFT and EPX-LIFT2?
The EPX-LIFT is designated by ABB as a lifting bolt with accessories, while EPX-LIFT2 is listed as a double lifting bolt with accessories. They are separate Protecta Power accessories, and the correct version should be selected according to the approved enclosure lifting arrangement.
What is the safe working load of the ABB EPX-LIFT?
A specific safe working load is not established by the EPX-LIFT product designation alone. Before use, installers must consult the relevant ABB Protecta Power lifting and assembly instructions and verify the complete enclosure weight, lifting attachment configuration, lifting equipment capacity and applicable safety requirements.
Trusted ABB Lifting Accessories for Professional Panel Building
ABB Protecta Power provides modular electrical distribution solutions for commercial and industrial installations. The ABB EPX-LIFT lifting bolt with accessories, order code 1SKV311010S0001, offers a manufacturer-designated component for approved enclosure lifting arrangements, supporting professional panelboard handling and installation when used in accordance with ABB's technical instructions.
