Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV305041S0001 ABB EPX-BPCXT1-4P Protecta Power XT1 4-Pole MCCB Base Plate and Cover
ABB EPX-BPCXT1-4P 1SKV305041S0001 is a Protecta Power MCCB base plate and cover accessory with a >160 A product designation, designed for mounting compatible ABB Tmax XT1 four-pole outgoing circuit breakers in low-voltage electrical distribution enclosures.
£41.67
Why Choose the ABB EPX-BPCXT1-4P MCCB Base Plate and Cover?
The ABB EPX-BPCXT1-4P, manufacturer order code 1SKV305041S0001, is a dedicated moulded case circuit breaker (MCCB) base plate and cover accessory designed for compatible ABB Tmax XT1 four-pole circuit breakers installed within ABB Protecta Power electrical distribution enclosures. This accessory provides the designated mounting and cover arrangement required to integrate an XT1 outgoing circuit breaker into a compatible low-voltage power distribution assembly.
As part of the ABB Protecta Power enclosure and distribution accessory range, the EPX-BPCXT1-4P supports the coordinated installation of four-pole MCCB devices. Its base plate provides a dedicated mounting arrangement, while the corresponding cover helps complete the outgoing device installation within the distribution board. The accessory is intended for electrical panel builders, switchboard manufacturers and installation engineers working with ABB Protecta Power systems.
The ABB EPX-BPCXT1-4P is identified by the manufacturer description as an XT1 four-pole MCCB base plate and cover with a >160 A designation. It is associated with the ABB Tmax XT1 frame, rated up to 160 A, and is supplied as an installation accessory rather than a complete protective device. The actual electrical protection characteristics are determined by the separately selected circuit breaker and the completed distribution assembly.
Key Advantages
- Purpose-designed MCCB base plate and cover for ABB Protecta Power distribution enclosures.
- Compatible with designated ABB Tmax XT1 four-pole MCCB arrangements.
- Provides a coordinated mounting and cover solution for outgoing circuit breakers.
- Supports four-pole electrical distribution configurations.
- Manufacturer product description includes a >160 A designation.
- Designed for integration with the ABB Tmax XT1 circuit breaker family.
- Helps maintain an organised distribution board layout.
- Supports straightforward selection of dedicated ABB mounting accessories.
- Suitable for commercial and industrial low-voltage power distribution applications.
- Ideal for new switchboard construction and compatible maintenance or refurbishment projects.
Key Features
- ABB Protecta Power MCCB base plate and cover.
- EPX-BPCXT1-4P model designation.
- Manufacturer order code 1SKV305041S0001.
- Designed for ABB Tmax XT1 moulded case circuit breakers.
- Four-pole (4P) outgoing MCCB configuration.
- Associated with the 160 A Tmax XT1 frame.
- Manufacturer description specifies >160 A.
- Provides the designated base plate and cover arrangement.
- Intended for compatible outgoing MCCB positions within ABB Protecta Power distribution boards.
- Supports installation of separately selected four-pole XT1 circuit breakers.
- Mechanical installation accessory without an integrated circuit breaker or trip unit.
- Part of the coordinated ABB Protecta Power enclosure accessory system.
Reliable Four-Pole MCCB Installation for Electrical Distribution Systems
Four-pole moulded case circuit breakers are used in low-voltage electrical distribution systems where the installation requires a switching and protection arrangement incorporating three phase conductors and a neutral pole. The ABB EPX-BPCXT1-4P provides a dedicated mounting and cover arrangement for compatible ABB Tmax XT1 four-pole outgoing MCCBs, supporting their integration into Protecta Power distribution boards.
The ABB Protecta Power system incorporates coordinated enclosures, incoming switching equipment, outgoing protective devices and installation accessories for commercial and industrial power distribution. ABB specifies that an appropriate MCCB base plate and cover is required for each outgoing device and must be ordered separately from the circuit breaker. This arrangement allows installers to select the correct accessory for the designated MCCB frame and pole configuration.
The EPX-BPCXT1-4P is specifically associated with the four-pole Tmax XT1 arrangement. Although its product description contains a >160 A designation, the Tmax XT1 circuit breaker family has a maximum frame rating of 160 A. The designation should therefore not be interpreted as a verified continuous-current rating above 160 A for this accessory. Installers should verify the selected MCCB, enclosure compatibility and complete assembly requirements before installation.
Typical Applications
- ABB Protecta Power low-voltage electrical distribution boards.
- Four-pole ABB Tmax XT1 outgoing MCCB installations.
- Three-phase electrical distribution systems incorporating neutral switching.
- Commercial building electrical distribution assemblies.
- Industrial low-voltage switchboards and panelboards.
- Outgoing circuit breaker mounting and cover installations.
- Electrical panel building and switchboard manufacturing.
- Building services and electrical plant room distribution equipment.
- Warehouse, logistics and manufacturing facility electrical infrastructure.
- Compatible ABB Protecta Power maintenance and refurbishment projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV305041S0001 | |
| Product description | EPX-BPCXT1-4P MCCB BP&C XT1 4P >160A | |
| Product type | MCCB base plate and cover | |
| Accessory category | Circuit breaker mounting and cover accessory | |
| Compatible circuit breaker family | ABB Tmax XT1 | |
| Associated circuit breaker type | Moulded case circuit breaker (MCCB) | |
| Pole configuration | 4-pole (4P) | |
| Current designation | >160 A | |
| Associated XT1 frame rating | Up to 160 A | |
| Components | MCCB base plate and cover | |
| Installation arrangement | Outgoing MCCB mounting position | |
| Compatible enclosure family | ABB Protecta Power | |
| Application | Mounting and covering compatible XT1 four-pole outgoing circuit breakers | |
| Product function | Mechanical mounting and enclosure integration | |
| Application environment | Low-voltage electrical distribution assemblies | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-BPCXT1-4P used for?
The ABB EPX-BPCXT1-4P is an MCCB base plate and cover accessory used to mount and integrate compatible ABB Tmax XT1 four-pole circuit breakers into ABB Protecta Power electrical distribution enclosures.
Which ABB circuit breaker is compatible with the EPX-BPCXT1-4P?
The accessory is designed for compatible ABB Tmax XT1 four-pole (4P) moulded case circuit breakers used in Protecta Power outgoing distribution arrangements. The XT1 frame supports rated currents up to 160 A.
What does the >160 A designation mean?
The manufacturer product description includes a >160 A designation. This identifies the accessory listing and should not be interpreted as an independent current rating above 160 A. The associated ABB Tmax XT1 circuit breaker frame is rated up to 160 A.
Does the ABB EPX-BPCXT1-4P include a circuit breaker?
No. The EPX-BPCXT1-4P is a base plate and cover accessory. The compatible four-pole ABB Tmax XT1 MCCB must be selected and ordered separately.
Where is the ABB EPX-BPCXT1-4P installed?
The accessory is installed at a compatible outgoing MCCB position within an ABB Protecta Power distribution enclosure, providing the designated mounting and cover arrangement for a four-pole Tmax XT1 circuit breaker.
Trusted ABB Power Distribution Solutions
ABB Protecta Power distribution systems provide a coordinated range of electrical enclosures, circuit breakers and installation accessories for low-voltage power distribution. The ABB EPX-BPCXT1-4P base plate and cover supports the integration of compatible four-pole Tmax XT1 outgoing MCCBs, helping electrical panel builders achieve organised, consistent and application-appropriate distribution board assemblies.
