Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV305034S0001 ABB EPX-BPCXT4-3P Protecta Power XT4 3-Pole MCCB Base Plate and Cover
ABB EPX-BPCXT4-3P 1SKV305034S0001 is a Protecta Power MCCB base plate and cover accessory with a >250 A product designation, designed for mounting compatible ABB Tmax XT4 three-pole outgoing circuit breakers in low-voltage electrical distribution enclosures.
£51.59
Why Choose the ABB EPX-BPCXT4-3P MCCB Base Plate and Cover?
The ABB EPX-BPCXT4-3P, manufacturer order code 1SKV305034S0001, is a dedicated MCCB base plate and cover accessory designed for compatible ABB Tmax XT4 three-pole moulded case circuit breakers installed within ABB Protecta Power electrical distribution enclosures. This accessory provides the mounting and cover components required for integrating the designated XT4 outgoing circuit breaker arrangement into a compatible low-voltage distribution assembly.
As part of the ABB Protecta Power enclosure and distribution accessory range, the EPX-BPCXT4-3P supports coordinated installation of outgoing MCCB devices. The base plate provides the designated mounting arrangement, while the cover forms part of the finished distribution board assembly, helping maintain an organised and accessible layout for electrical switching and protection equipment.
The ABB EPX-BPCXT4-3P is identified by the manufacturer description as an XT4 three-pole MCCB base plate and cover with a >250 A designation. It is intended for compatible ABB Protecta Power outgoing circuit arrangements using Tmax XT4 devices. The product is an installation accessory rather than a complete circuit breaker, and the actual electrical ratings depend on the separately selected MCCB and completed distribution assembly.
Key Advantages
- Purpose-designed MCCB base plate and cover for ABB Protecta Power distribution enclosures.
- Compatible with designated ABB Tmax XT4 three-pole MCCB arrangements.
- Provides the mounting and cover components required for a compatible outgoing circuit breaker position.
- Manufacturer product description includes a >250 A designation.
- Supports coordinated installation of outgoing circuit protection equipment.
- Helps maintain an organised internal distribution board arrangement.
- Designed specifically for the ABB Protecta Power enclosure system.
- Suitable for commercial and industrial low-voltage power distribution applications.
- Supports electrical panel building, assembly and compatible maintenance projects.
- Dedicated ABB accessory for consistent MCCB installation and enclosure integration.
Key Features
- ABB Protecta Power MCCB base plate and cover.
- EPX-BPCXT4-3P model designation.
- Manufacturer order code 1SKV305034S0001.
- Designed for ABB Tmax XT4 moulded case circuit breakers.
- Three-pole (3P) outgoing MCCB configuration.
- Manufacturer description specifies >250 A.
- Includes the designated base plate and cover arrangement.
- Intended for compatible outgoing positions within ABB Protecta Power distribution boards.
- Supports the installation of separately selected XT4 circuit breakers.
- Forms part of the coordinated ABB Protecta Power accessory system.
- Mechanical installation accessory without an integrated circuit breaker or trip unit.
- Suitable for installation by qualified electrical contractors and panel builders.
Reliable MCCB Installation for ABB Protecta Power Distribution Boards
Moulded case circuit breakers are widely used in low-voltage electrical distribution systems to provide overload and short-circuit protection for outgoing circuits. Correct installation requires suitable mounting arrangements and enclosure components that are compatible with the selected protective device and distribution assembly. The ABB EPX-BPCXT4-3P provides the designated base plate and cover for compatible three-pole Tmax XT4 outgoing MCCB installations.
The ABB Protecta Power system incorporates coordinated enclosures, incoming devices, outgoing circuit breakers and installation accessories for commercial and industrial power distribution. ABB specifies that outgoing MCCB base plates and covers are ordered separately from the associated circuit breakers, allowing the required installation accessories to be selected for each device configuration.
The EPX-BPCXT4-3P is intended for three-pole Tmax XT4 arrangements and must be matched to the appropriate Protecta Power enclosure configuration. The manufacturer's >250 A product designation identifies the accessory listing and should not be interpreted as the continuous-current rating of the base plate and cover. The actual circuit breaker rating, protection characteristics and overall assembly performance are determined by the selected electrical equipment and completed installation.
Typical Applications
- ABB Protecta Power low-voltage electrical distribution boards.
- Three-pole ABB Tmax XT4 outgoing MCCB installations.
- Commercial building electrical distribution systems.
- Industrial electrical switchboards and power distribution assemblies.
- Outgoing circuit breaker mounting arrangements.
- Electrical panel building and distribution board construction.
- Building services and electrical plant room installations.
- Warehouse and logistics facility power distribution.
- Manufacturing plant electrical distribution systems.
- Compatible ABB Protecta Power maintenance, replacement and refurbishment projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SKV305034S0001 | |
| Product description | EPX-BPCXT4-3P MCCB BP&C XT4 3P >250A | |
| Product type | MCCB base plate and cover | |
| Accessory category | Circuit breaker mounting and cover accessory | |
| Compatible circuit breaker family | ABB Tmax XT4 | |
| Associated circuit breaker type | Moulded case circuit breaker (MCCB) | |
| Pole configuration | 3-pole (3P) | |
| Current designation | >250 A | |
| Associated XT4 frame rating | Up to 250 A | |
| Components | MCCB base plate and cover | |
| Installation arrangement | Outgoing MCCB mounting position | |
| Compatible enclosure family | ABB Protecta Power | |
| Application | Mounting and covering compatible XT4 outgoing circuit breakers | |
| Product function | Mechanical mounting and enclosure integration | |
| Application environment | Low-voltage electrical distribution assemblies | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-BPCXT4-3P used for?
The ABB EPX-BPCXT4-3P is an MCCB base plate and cover accessory used to mount and integrate compatible ABB Tmax XT4 three-pole circuit breakers into ABB Protecta Power electrical distribution enclosures.
Which ABB circuit breaker is compatible with the EPX-BPCXT4-3P?
The accessory is designed for compatible ABB Tmax XT4 three-pole (3P) moulded case circuit breakers used in Protecta Power outgoing distribution arrangements.
What does the >250 A designation mean?
The supplied manufacturer product description includes a >250 A designation. This identifies the accessory listing and does not establish an independent continuous-current rating for the base plate and cover. The associated Tmax XT4 circuit breaker frame supports ratings up to 250 A.
Does the ABB EPX-BPCXT4-3P include a circuit breaker?
No. The EPX-BPCXT4-3P is a base plate and cover accessory. The compatible ABB Tmax XT4 MCCB must be selected and ordered separately.
Where is the ABB EPX-BPCXT4-3P installed?
The accessory is installed at a compatible outgoing MCCB position within an ABB Protecta Power distribution enclosure, providing the designated mounting and cover arrangement for a three-pole Tmax XT4 circuit breaker.
Trusted ABB Power Distribution Solutions
ABB Protecta Power distribution systems provide a coordinated range of enclosures, circuit breakers and installation accessories for low-voltage electrical installations. The ABB EPX-BPCXT4-3P base plate and cover supports the integration of compatible three-pole Tmax XT4 outgoing MCCBs, helping electrical panel builders achieve organised and application-appropriate distribution board assemblies.
