Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV305028S0001 ABB EPX-BPCA1-1P+N MCCB BP&C A1 1P+N >125A Protecta Power Accessory
ABB EPX-BPCA1-1P+N (1SKV305028S0001) is a Protecta Power MCCB BP&C A1 accessory with a single-pole plus neutral configuration, designated for >125 A applications in compatible low-voltage distribution assemblies.
£42.79
Why Choose the ABB EPX-BPCA1-1P+N MCCB BP&C A1 1P+N >125 A?
The ABB EPX-BPCA1-1P+N (1SKV305028S0001) is a dedicated MCCB BP&C A1 single-pole plus neutral (1P+N) accessory designed for use within ABB Protecta Power low-voltage electrical distribution assemblies. As part of the ABB Protecta Power enclosure accessory range, this component supports compatible moulded case circuit breaker (MCCB) installations requiring an A1 BP&C arrangement with provision for a neutral conductor.
Identified by the manufacturer as EPX-BPCA1-1P+N MCCB BP&C A1 (1P+N) >125A, the product features a 1P+N configuration and a specified application designation of >125 A. The accessory is intended to support coordinated MCCB installation within compatible Protecta Power distribution equipment.
The ABB EPX-BPCA1-1P+N provides a manufacturer-specific accessory solution for electrical panel builders and switchgear professionals. Its defined configuration helps identify the correct component for compatible A1 MCCB arrangements, supporting organised low-voltage distribution board construction, refurbishment and maintenance.
Key Advantages
- Designed for ABB Protecta Power low-voltage distribution assemblies.
- Dedicated MCCB BP&C A1 accessory for compatible installations.
- Single-pole plus neutral (1P+N) configuration.
- >125 A manufacturer application designation.
- Supports MCCB arrangements requiring phase and neutral provisions.
- Helps maintain coordinated accessory selection within modular distribution equipment.
- Suitable for professional electrical panelboard construction and maintenance.
- ABB-specific product identification simplifies specification and replacement planning.
Key Features
- ABB Protecta Power enclosure accessory.
- EPX-BPCA1-1P+N model designation.
- MCCB BP&C A1 product configuration.
- 1P+N phase and neutral arrangement.
- >125 A application designation.
- Designed for compatible MCCB-related distribution arrangements.
- Supports integration into ABB Protecta Power assemblies.
- Intended for low-voltage electrical distribution equipment.
- Suitable for coordinated enclosure assembly and component replacement.
- ABB manufacturer order code 1SKV305028S0001.
Reliable MCCB Integration for Phase and Neutral Distribution Arrangements
Moulded case circuit breakers are important components of low-voltage distribution systems, providing circuit protection and switching functions according to their individual specifications. Installation within modular distribution assemblies requires correctly selected accessories to accommodate the intended circuit breaker configuration, conductor arrangement and enclosure design.
The ABB EPX-BPCA1-1P+N is identified for an A1 BP&C arrangement incorporating one phase and neutral. Its manufacturer-specific configuration supports component selection for compatible ABB Protecta Power assemblies. The precise BP&C construction, supported MCCB models and installation requirements should be confirmed against the relevant ABB assembly instructions. The >125 A designation identifies the specified application category rather than an independently established continuous-current rating.
Typical Applications
- ABB Protecta Power low-voltage distribution assemblies.
- Compatible A1 MCCB BP&C installation arrangements.
- Single-phase electrical distribution systems requiring a neutral connection.
- Commercial building electrical distribution panels.
- Industrial control and power distribution equipment.
- Modular electrical panelboard construction.
- Switchgear refurbishment and maintenance projects.
- Replacement of compatible ABB Protecta Power MCCB accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | ABB Protecta Power | |
|---|---|---|
| Device Type | Accessory | |
| Product range | Protecta Power | |
| ABB order code | 1SKV305028S0001 | |
| Product designation | MCCB BP&C A1 (1P+N) >125 A | |
| Product type | MCCB BP&C installation accessory | |
| Accessory configuration | A1 | |
| Pole arrangement | 1P+N | |
| Phase configuration | Single-pole plus neutral | |
| Application current designation | >125 A | |
| Associated equipment | Compatible moulded case circuit breaker installations | |
| Installation application | Low-voltage distribution assemblies | |
| Distribution system | ABB Protecta Power | |
| Component classification | Electrical distribution enclosure accessory | |
| Product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-BPCA1-1P+N used for?
The ABB EPX-BPCA1-1P+N is an MCCB BP&C A1 accessory designed for compatible ABB Protecta Power low-voltage distribution assemblies requiring a single-pole plus neutral arrangement.
What does 1P+N mean on the EPX-BPCA1-1P+N?
The 1P+N designation identifies a configuration incorporating one phase pole and a neutral provision. It does not independently establish whether the neutral is switched or protected.
What does the >125 A designation mean?
The product is identified as MCCB BP&C A1 (1P+N) >125 A. This is the manufacturer's application designation and should not be interpreted as a separately confirmed continuous-current rating.
Which ABB product range includes the EPX-BPCA1-1P+N?
The EPX-BPCA1-1P+N belongs to the ABB Protecta Power Enclosures product group, which includes components and accessories for low-voltage electrical distribution assemblies.
Is the ABB EPX-BPCA1-1P+N a complete MCCB?
No. The EPX-BPCA1-1P+N is identified as an MCCB-related BP&C accessory, rather than a complete protective circuit breaker.
Can the EPX-BPCA1-1P+N be used with any MCCB?
No. The accessory is intended for compatible ABB Protecta Power A1 MCCB arrangements. The circuit breaker model, enclosure configuration and installation requirements must be checked before selection.
What is the ABB order code for the EPX-BPCA1-1P+N?
The ABB manufacturer order code is 1SKV305028S0001, corresponding to the EPX-BPCA1-1P+N MCCB BP&C A1 (1P+N) >125 A accessory.
Trusted by Electrical Panel Builders and Distribution Professionals
ABB Protecta Power enclosure accessories support professional low-voltage distribution board construction and maintenance. The ABB EPX-BPCA1-1P+N provides a manufacturer-specific A1 MCCB BP&C accessory option for compatible single-pole plus neutral installations, helping switchgear professionals achieve coordinated component selection within modular electrical distribution assemblies.
