Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SDA123192R1 ABB EPX-NLXT4 XT4 Neutral Link >250A Protecta Power
ABB EPX-NLXT4 (1SDA123192R1) is a Protecta Power XT4 neutral link designated for >250 A applications, providing a separate neutral connection for compatible three-pole outgoing MCCB distribution assemblies.
£212.60
Why Choose the ABB EPX-NLXT4 XT4 Neutral Link >250 A?
The ABB EPX-NLXT4 (1SDA123192R1) is a dedicated XT4 neutral link designed for use within ABB Protecta Power low-voltage distribution assemblies. As part of the ABB Protecta Power enclosure and distribution system, this accessory provides a neutral connection arrangement for compatible outgoing moulded case circuit breaker (MCCB) installations.
Specifically identified for ABB Tmax XT4 outgoing MCCB applications, the EPX-NLXT4 supports the organisation of neutral conductors within distribution equipment. Its application in the Protecta Power system helps electrical panel builders establish a coordinated neutral connection arrangement alongside three-pole outgoing circuit breakers.
The EPX-NLXT4 is specified as an XT4 neutral link for >250 A applications under ABB order code 1SDA123192R1. It is intended for appropriately engineered Protecta Power assemblies, including compatible group-mounted Form 4 Type 2/6 arrangements. The neutral link is an electrical connection accessory rather than a protective switching device, and its suitability must be assessed against the complete distribution assembly design.
Key Advantages
- Dedicated neutral link for ABB Tmax XT4 outgoing MCCB installations.
- Designed for integration with ABB Protecta Power distribution assemblies.
- Manufacturer product designation identifies >250 A applications.
- Provides a separate neutral connection arrangement alongside compatible three-pole MCCBs.
- Supports organised neutral conductor connections within low-voltage distribution equipment.
- Suitable for compatible group-mounted Form 4 Type 2/6 switchboard configurations.
- Supports modular panelboard construction, assembly and maintenance.
- ABB-specific accessory identification helps simplify component selection and replacement.
Key Features
- ABB Protecta Power distribution system accessory.
- EPX-NLXT4 neutral link product designation.
- Designed for ABB Tmax XT4 MCCB outgoing applications.
- >250 A application designation as specified for the product.
- Provides a dedicated neutral connection point in compatible distribution assemblies.
- Intended for use alongside three-pole outgoing MCCBs.
- Applicable to compatible group-mounted Form 4 Type 2/6 arrangements.
- Passive electrical connection component without circuit-breaking functionality.
- Designed for integration into appropriately configured Protecta Power enclosures.
- ABB manufacturer order code 1SDA123192R1.
Reliable Neutral Connections for Low-Voltage Power Distribution
Neutral links provide connection points for neutral conductors within electrical distribution systems. Where three-pole moulded case circuit breakers are used to control and protect phase conductors, a separate neutral connection arrangement may be required according to the electrical system design. Correct selection and installation of neutral connection components are important for maintaining conductor continuity and supporting reliable distribution board operation.
The ABB EPX-NLXT4 is designed for the outgoing section of compatible ABB Protecta Power assemblies incorporating Tmax XT4 MCCBs. Its dedicated application within the manufacturer's modular distribution system supports coordinated panel construction and component compatibility. Electrical designers and installers must verify the required neutral conductor capacity, connection arrangement, installation conditions and complete assembly rating before commissioning.
Typical Applications
- ABB Protecta Power low-voltage distribution assemblies.
- Outgoing circuits using ABB Tmax XT4 three-pole MCCBs.
- Commercial electrical power distribution switchboards.
- Industrial low-voltage distribution panels.
- Group-mounted Form 4 Type 2/6 switchgear arrangements.
- Electrical installations requiring separate neutral conductor connections.
- Modular distribution board construction and assembly.
- Maintenance and replacement of compatible Protecta Power neutral connection accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | ABB Protecta Power | |
|---|---|---|
| Device Type | Busbar / Terminal | |
| Product range | Protecta Power | |
| ABB order code | 1SDA123192R1 | |
| Product type | Neutral link | |
| Product designation | XT4 Neutral Link >250 A | |
| Application current designation | >250 A | |
| Compatible circuit breaker family | ABB Tmax XT4 | |
| Associated outgoing device | Three-pole moulded case circuit breaker | |
| Electrical function | Neutral conductor connection | |
| Installation application | Outgoing distribution section | |
| Distribution system | ABB Protecta Power | |
| Compatible assembly arrangement | Group-mounted Form 4 Type 2/6 | |
| Component classification | Electrical distribution accessory | |
| Product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-NLXT4 used for?
The ABB EPX-NLXT4 is a neutral link designed for compatible ABB Protecta Power outgoing distribution sections using Tmax XT4 moulded case circuit breakers.
Which circuit breaker is compatible with the ABB EPX-NLXT4?
The EPX-NLXT4 is specifically associated with the ABB Tmax XT4 MCCB family and is listed for use alongside compatible three-pole outgoing circuit breakers in Protecta Power assemblies.
What does the >250 A designation mean for this neutral link?
The product is identified as an XT4 Neutral Link >250 A. This is the supplied product designation and should not be interpreted as a confirmed continuous-current rating without reference to the applicable ABB assembly specifications.
Is the ABB EPX-NLXT4 a circuit breaker?
No. The EPX-NLXT4 is a passive neutral connection accessory. It does not provide overload protection, short-circuit protection or switching functionality.
Can the EPX-NLXT4 be used in Form 4 distribution assemblies?
Yes. ABB identifies XT4 outgoing neutral links within its Protecta Power system for compatible group-mounted Form 4 Type 2/6 configurations. Installation must follow the relevant assembly design and manufacturer requirements.
Why is a separate neutral link required with a three-pole MCCB?
A three-pole MCCB provides switching and protection for three phase conductors. Where the electrical installation requires a neutral conductor, a separate neutral connection arrangement may be necessary, depending on the system configuration.
What is the ABB order code for the EPX-NLXT4?
The ABB manufacturer order code is 1SDA123192R1, corresponding to the EPX-NLXT4 XT4 Neutral Link >250 A product designation.
Trusted by Electrical Panel Builders and Distribution Professionals
ABB Protecta Power distribution components are designed to support professional low-voltage electrical distribution installations across commercial and industrial environments. The ABB EPX-NLXT4 neutral link provides a dedicated neutral connection accessory for compatible Tmax XT4 outgoing MCCB assemblies, supporting coordinated switchboard construction, electrical distribution design and long-term system maintenance.
