Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SDA123191R1 ABB EPX-NLXT2 XT2 Neutral Link >160A
ABB EPX-NLXT2 1SDA123191R1 is an XT2 neutral link accessory designated for applications above 160 A and designed to provide a separate neutral connection within compatible ABB Protecta Power outgoing distribution arrangements.
£178.85
Why Choose the ABB EPX-NLXT2 XT2 Neutral Link?
The ABB EPX-NLXT2, manufacturer order code 1SDA123191R1, is a dedicated XT2 neutral link accessory for ABB Protecta Power electrical distribution enclosures. Designed for use with compatible ABB Tmax XT2 moulded case circuit breaker (MCCB) outgoing arrangements, this component provides a dedicated neutral connection within low-voltage power distribution assemblies.
As part of the ABB Protecta Power enclosure and distribution accessory range, the EPX-NLXT2 supports the organisation and termination of neutral conductors associated with outgoing circuits. Its application-specific design helps electrical panel builders and installation engineers configure distribution equipment with suitable neutral connection facilities while maintaining an orderly internal assembly.
The ABB EPX-NLXT2 is identified as an XT2 neutral link for applications above 160 A in the supplied product specification. It is intended for compatible Protecta Power outgoing sections incorporating three-pole XT2 MCCB arrangements, where a separate neutral connection is required. The neutral link is an accessory rather than a protective circuit breaker and must be selected according to the complete assembly design and applicable electrical ratings.
Key Advantages
- Dedicated neutral link for ABB Protecta Power distribution enclosures.
- Designed for compatible ABB Tmax XT2 MCCB outgoing arrangements.
- Provides a separate neutral connection for associated outgoing circuits.
- Identified for applications above 160 A in the supplied product description.
- Supports organised neutral conductor termination within distribution assemblies.
- Suitable for compatible group-mounted outgoing sections.
- Supports Protecta Power configurations incorporating Form 4 Type 2/6 separation.
- Application-specific accessory for electrical panel builders and installation engineers.
- Helps maintain consistency when assembling or modifying ABB Protecta Power equipment.
Key Features
- ABB Protecta Power enclosure accessory.
- EPX-NLXT2 XT2 neutral link.
- Manufacturer order code 1SDA123191R1.
- Designed for compatible Tmax XT2 three-pole MCCB outgoing devices.
- Provides a dedicated neutral connection separate from the three protected phases.
- Intended for installation within compatible outgoing distribution sections.
- Associated with ABB Protecta Power group-mounted distribution arrangements.
- Supports appropriate neutral conductor management within electrical assemblies.
- Passive electrical connection accessory without an integrated switching or protection mechanism.
- Suitable for new distribution assembly construction and compatible maintenance applications.
Reliable Neutral Connections for Electrical Distribution Systems
In three-phase electrical distribution systems, neutral conductors may be required to complete the supply arrangement for connected loads. Where a three-pole moulded case circuit breaker provides protection and switching for the phase conductors, a separate neutral connection may be incorporated into the distribution assembly. The ABB EPX-NLXT2 is designed to fulfil this connection function within compatible Protecta Power outgoing arrangements.
The ABB Protecta Power range includes enclosure systems and accessories for constructing low-voltage electrical distribution assemblies. Its outgoing neutral link accessories are intended for use alongside designated MCCB configurations, helping panel builders establish suitable connections while supporting the internal organisation of the assembly.
The EPX-NLXT2 is associated with the ABB Tmax XT2 outgoing device arrangement. Selection and installation should account for the neutral conductor requirements, the rated characteristics of the complete assembly and the manufacturer's applicable installation instructions. The >160 A designation in the supplied product description should not be interpreted as a verified continuous-current rating for the neutral link without confirmation of the complete assembly specification.
Typical Applications
- ABB Protecta Power low-voltage electrical distribution enclosures.
- Compatible Tmax XT2 MCCB outgoing circuit arrangements.
- Three-phase distribution systems requiring separate neutral connections.
- Commercial building electrical distribution boards.
- Industrial low-voltage power distribution assemblies.
- Electrical panel building and switchboard construction.
- Group-mounted MCCB outgoing sections.
- Compatible Form 4 Type 2/6 distribution arrangements.
- Electrical distribution enclosure maintenance and refurbishment.
- Power distribution installations requiring designated ABB neutral connection accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar / Terminal | |
|---|---|---|
| Product Series | ABB Protecta Power | |
| Product family | Protecta Power Enclosures | |
| Series | ABB Protecta Power | |
| ABB order code | 1SDA123191R1 | |
| Product description | EPX-NLXT2 XT2 Neutral Link >160A | |
| Product type | Neutral link accessory | |
| Accessory category | Electrical distribution neutral connection | |
| Associated circuit breaker family | ABB Tmax XT2 | |
| Associated outgoing device | 3-pole MCCB | |
| Current designation | >160 A | |
| Application | Outgoing neutral connection | |
| Compatible enclosure family | ABB Protecta Power | |
| Assembly arrangement | Compatible group-mounted outgoing sections | |
| Associated separation arrangement | Form 4 Type 2/6 | |
| Installation location | Electrical distribution enclosure outgoing section | |
| Function | Neutral conductor connection | |
| Manufacturer product group | Protecta Power Enclosures |
Frequently Asked Questions
What is the ABB EPX-NLXT2 used for?
The ABB EPX-NLXT2 is a neutral link accessory used to provide a dedicated neutral connection within compatible ABB Protecta Power outgoing distribution sections associated with Tmax XT2 MCCB arrangements.
Which ABB circuit breaker range is the EPX-NLXT2 associated with?
The EPX-NLXT2 is designed for compatible ABB Tmax XT2 three-pole moulded case circuit breaker outgoing arrangements within the Protecta Power distribution system.
What does the >160 A designation mean?
The supplied product description identifies the EPX-NLXT2 as an XT2 neutral link for applications above 160 A. The designation should be checked against the complete distribution assembly specification before selecting the component for a particular current requirement.
Does the ABB EPX-NLXT2 provide circuit protection?
No. The EPX-NLXT2 is a passive neutral connection accessory and does not provide overload or short-circuit protection. Circuit protection is provided by appropriately selected protective devices within the electrical installation.
Where is the ABB EPX-NLXT2 installed?
The neutral link is intended for installation within a compatible ABB Protecta Power outgoing distribution section, alongside the associated MCCB arrangement and in accordance with the manufacturer's assembly instructions.
Trusted ABB Power Distribution Solutions
ABB Protecta Power distribution systems provide a coordinated range of enclosures, circuit breaker arrangements and connection accessories for low-voltage electrical installations. The ABB EPX-NLXT2 neutral link supports dedicated neutral connections within compatible Tmax XT2 outgoing arrangements, helping panel builders create organised and application-appropriate electrical distribution assemblies.
