Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX070387R9999 ABB AH1 Solid Cover 250w x 75h 1PW
ABB AH1 solid cover, order code 2CPX070387R9999, measuring 250 mm wide x 75 mm high with a 1PW configuration for compatible ABB low-voltage electrical sub-distribution assemblies.
£28.23
Why Choose the ABB AH1 Solid Cover 250w x 75h 1PW?
The ABB AH1 (2CPX070387R9999) is a dedicated solid cover measuring 250 mm wide x 75 mm high, designed for integration into compatible ABB low-voltage electrical distribution assemblies. Identified as the AH1 Solid Cover 250w x 75h 1PW, this accessory provides a solid front covering for an appropriately matched section of an electrical distribution panel.
As part of ABB's DESUJ Sub Distribution product group, the AH1 supports the completion and organisation of compatible electrical distribution equipment. Solid covers are important panel accessories, helping to close designated front-facing areas and maintain a consistent appearance across assembled distribution boards and switchgear enclosures.
The ABB AH1 solid cover features a 250 mm width, 75 mm height and 1PW configuration designation. These identifying characteristics help electrical contractors, panel builders and maintenance engineers select the correct cover for their intended assembly. The ABB manufacturer order code 2CPX070387R9999 supports accurate specification, procurement and replacement sourcing.
Key Advantages
- Genuine ABB solid cover accessory for compatible electrical distribution equipment.
- 250 mm wide x 75 mm high dimensions for appropriately matched panel arrangements.
- 1PW configuration for compatible ABB sub-distribution assemblies.
- Provides a solid covering for designated front-facing panel sections.
- Supports a neat, consistent appearance across electrical distribution assemblies.
- Part of ABB's DESUJ Sub Distribution product group.
- Suitable for professional electrical panel-building, refurbishment and maintenance applications.
- Manufacturer order code enables accurate product identification and procurement.
Key Features
- ABB AH1 solid cover.
- 250 mm nominal width.
- 75 mm nominal height.
- 1PW configuration designation.
- Solid cover design for a compatible electrical distribution panel section.
- Designed for integration into appropriately specified ABB sub-distribution assemblies.
- Supports the completion of compatible panel front arrangements.
- Suitable for new installations and replacement cover requirements.
- Classified within DESUJ Sub Distribution.
- Identified by ABB manufacturer order code 2CPX070387R9999.
Solid Panel Covers for Organised Electrical Distribution Assemblies
Solid covers are used in electrical distribution assemblies to close designated sections of a panel front where the equipment design requires an uninterrupted covering. They contribute to an organised panel layout and help provide a consistent finish alongside other appropriately specified covers and installation accessories.
The ABB AH1 Solid Cover 250w x 75h 1PW is identified by its 250 mm width, 75 mm height and 1PW designation. These specifications make it possible to distinguish the AH1 from other cover sizes and configurations when selecting components for compatible ABB distribution assemblies.
A solid cover may form part of an enclosure's intended protective arrangement, but the AH1's individual ingress protection, impact resistance and electrical safety performance are not established by its product designation alone. Installers should verify the compatible enclosure system, fixing method, installation position and any applicable protection requirements using ABB's technical documentation. The completed distribution assembly must meet the relevant electrical installation and enclosure requirements.
Typical Applications
- Compatible ABB electrical sub-distribution assemblies.
- Low-voltage electrical distribution boards.
- Commercial building electrical distribution panels.
- Industrial switchgear and power distribution cabinets.
- Covering designated front-facing sections of compatible panel assemblies.
- Electrical panel-building and enclosure completion projects.
- Panel arrangements requiring a 250 mm x 75 mm solid cover with a 1PW designation.
- Replacement, refurbishment and maintenance of compatible distribution panel covers.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine | |
| Product designation | AH1 | |
| Manufacturer order code | 2CPX070387R9999 | |
| Product group | DESUJ Sub Distribution | |
| Product type | Solid cover | |
| Accessory category | Electrical distribution panel cover accessory | |
| Nominal width | 250 mm | |
| Nominal height | 75 mm | |
| Configuration designation | 1PW | |
| Cover format | Solid | |
| Primary function | Covering a compatible section of an electrical distribution assembly | |
| Intended equipment | Compatible ABB electrical sub-distribution assemblies | |
| Application | Low-voltage electrical distribution panel construction and maintenance |
Frequently Asked Questions
What is the ABB AH1 2CPX070387R9999 used for?
The ABB AH1 is a solid cover intended to close a designated section of a compatible ABB electrical sub-distribution panel. It supports the completion of the panel front arrangement.
What are the dimensions of the ABB AH1 solid cover?
The ABB AH1 is designated as 250 mm wide x 75 mm high. These dimensions should be matched to the intended panel arrangement, with fitting details confirmed against ABB's technical documentation.
What does 1PW mean in the ABB AH1 product designation?
1PW is the configuration designation specified for the ABB AH1 solid cover. It should be matched to the appropriate ABB distribution assembly documentation rather than treated as confirmation of universal compatibility.
Does the ABB AH1 solid cover provide a specific IP protection rating?
A specific IP protection rating cannot be established from the AH1 product designation alone. The protection achieved depends on the complete compatible enclosure assembly and its installation. Check the applicable ABB technical documentation for confirmed protection ratings.
How can I confirm that the ABB AH1 cover fits my distribution panel?
Check the AH1 product designation, 250 mm x 75 mm dimensions, 1PW configuration and ABB manufacturer order code 2CPX070387R9999 against the parts list and assembly instructions for the intended distribution panel. Confirm the fixing arrangement and installation requirements before fitting.
Trusted ABB Electrical Distribution Cover Accessories
ABB supplies electrical distribution components and installation accessories for professional low-voltage switchgear and panel-building applications. The AH1 Solid Cover 250w x 75h 1PW, order code 2CPX070387R9999, provides a clearly identified solid cover for compatible ABB sub-distribution assemblies, supporting accurate component selection, organised panel construction and maintenance.
