Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZX391 (2CPX068561R9999) three-panel-wide SlimLine mounting frame for compatible ABB NH fuse switch-disconnectors. Designed for M(B)L35 distribution field arrangements with a five-row-equivalent configuration. External dimensions 645 x 460 x 83 mm. ABB STRIEBEL & JOHN interior expansion system accessory, supplied as one mounting frame.
£187.51
The ABB ZX391 (2CPX068561R9999) is a purpose-designed three-panel-wide mounting frame for ABB SlimLine NH fuse switch-disconnectors. Developed for compatible ABB STRIEBEL & JOHN electrical distribution systems, it provides a dedicated mechanical mounting arrangement for integrating SlimLine switching equipment into professional low-voltage distribution assemblies.
Designed for a three-field-wide distribution layout, the ZX391 is specifically associated with the M(B)L35 installation arrangement. ABB identifies the mounting frame as suitable for a five-row-equivalent configuration, making it a specialist accessory for distribution panel construction where the positioning and support of NH fuse switch-disconnectors must match the manufacturer's system design.
The frame measures 645 mm wide × 460 mm high × 83 mm deep, providing a defined mounting structure for compatible equipment. Its vertical console-style construction is intended to support the installation of ABB SlimLine NH load-break switching devices within the appropriate distribution field.
Supplied as one mounting frame per pack, the ABB ZX391 is suitable for new switchboard installations, distribution system expansion and replacement projects requiring the specified three-panel-wide SlimLine mounting arrangement. It is a mechanical mounting accessory rather than a complete switch-disconnector, fuse carrier or electrical protection device.
The ABB ZX391 provides a dedicated mechanical mounting solution for ABB SlimLine NH fuse switch-disconnectors within compatible distribution board assemblies. NH fuse switch-disconnectors combine switching and fuse-based circuit protection when fitted with correctly selected fuse links. The ZX391 itself serves only as the mounting structure for the associated equipment.
ABB specifies the ZX391 for a three-field-wide installation, identified by the M(B)L35 distribution field reference. This manufacturer-defined compatibility is important because the mounting arrangement must match the switchgear layout, supporting structure and available installation space.
The frame's 645 mm width corresponds to its intended three-panel-wide mounting configuration. Its 460 mm height and 83 mm depth provide the physical dimensions needed when planning the internal arrangement of a compatible distribution assembly. Installers should allow for the additional space required by the fitted switching equipment, terminals, conductors and any associated accessories.
The vertical mounting arrangement is intended to provide a structured installation position for compatible SlimLine equipment. Correct alignment is important for maintaining the manufacturer's intended mechanical arrangement and ensuring suitable access to the installed switch-disconnectors.
As part of the ABB STRIEBEL & JOHN interior expansion system, the ZX391 is intended for use with specified distribution field components rather than as a universal mounting bracket. Its suitability must therefore be established through the exact ABB system configuration, not simply by matching the external dimensions.
The ZX391 is supplied as a single mounting frame. The associated NH fuse switch-disconnectors, fuse links, electrical connections and any separately required mounting accessories must be specified according to the installation design and the manufacturer's assembly documentation.
The ABB ZX391 should be installed by competent electrical personnel or qualified panel builders familiar with the relevant ABB distribution system. Installation must follow the manufacturer's mounting instructions and the applicable electrical assembly standards.
Before installation, confirm that the distribution field corresponds to the M(B)L35 three-field arrangement and that the intended ABB SlimLine NH fuse switch-disconnectors are suitable for the specified mounting configuration.
The mounting frame must be securely attached to the appropriate supporting structure. The correct fasteners, mounting points and installation method should be taken from ABB's documentation for the complete distribution assembly. Fastening hardware should not be assumed to be included unless confirmed by the supplied product contents.
Careful consideration should be given to cable routing, busbar arrangements, equipment clearances and access for maintenance. The frame's 83 mm depth is the mounting accessory dimension and does not represent the total depth required by a completed SlimLine installation.
Where the installation includes NH fuse switch-disconnectors, the associated electrical equipment must be selected for the system voltage, load current, prospective fault current and fuse protection requirements. The mounting frame itself has no independent electrical current rating or short-circuit breaking capacity.
The completed switchboard or distribution assembly must provide the required protection against electric shock, mechanical hazards and environmental conditions. The ZX391 does not independently establish an IP protection rating for the completed enclosure.
ABB provides mounting frame options for different distribution field widths. The correct version should be selected according to the compatible field arrangement and the intended SlimLine equipment.
The ZX390 and ZX391 are designed for different panel widths and should not be treated as interchangeable without checking the complete ABB distribution system configuration.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Door / Cover / Partition |
The ABB ZX391 is a mounting frame designed for installing compatible ABB SlimLine NH fuse switch-disconnectors in three-panel-wide electrical distribution assemblies.
3PW means three-panel-wide. It identifies the width configuration of the compatible distribution field for which the ZX391 mounting frame is designed.
The ZX391 measures 645 mm wide × 460 mm high × 83 mm deep.
ABB specifies the ZX391 for the M(B)L35 distribution field arrangement, which uses a three-field-wide configuration.
Yes. The ZX391 is specifically identified by ABB as a mounting frame for ABB SlimLine NH fuse switch-disconnectors. Compatibility with the exact switch-disconnector and distribution field must be confirmed before installation.
5 RE identifies the five-row-equivalent installation classification associated with the ZX391 mounting arrangement. It should be interpreted within ABB's distribution field system documentation.
No. The ZX391 is a mechanical mounting frame. It does not include the electrical switching or fuse protection functions of a complete NH fuse switch-disconnector.
No. The ZX391 provides a mounting function only. Overload and short-circuit protection must be provided by the correctly specified electrical protective equipment installed in the completed assembly.
The ZX390 is intended for a two-field-wide SlimLine mounting arrangement compatible with M(B)L25. The ZX391 is intended for a three-field-wide arrangement compatible with M(B)L35.
The ZX391 is listed as an ABB STRIEBEL & JOHN interior expansion system accessory and is associated with compatible CombiLine distribution arrangements. The exact distribution field and mounting configuration must be checked before use.
The ABB ZX391 is supplied as one mounting frame per pack.
No independent current rating is specified for the ZX391 because it is a mechanical mounting accessory. Electrical current and fault ratings relate to the compatible switching and protective devices installed within the assembly.
The ZX391 is an internal mounting frame and does not independently determine the enclosure's IP protection rating. The required ingress protection must be provided by the complete distribution enclosure assembly.
ABB STRIEBEL & JOHN lists Germany as the country of origin for the ZX391 mounting frame.
The ABB order code and product ID are 2CPX068561R9999. The product model is ZX391, and its EAN / GTIN is 4011617685616.
The ABB ZX391 provides a dedicated three-panel-wide mounting frame for compatible ABB SlimLine NH fuse switch-disconnectors. With a 645 × 460 × 83 mm vertical mounting structure, M(B)L35 compatibility and ABB STRIEBEL & JOHN system integration, the 2CPX068561R9999 is a practical mechanical accessory for professional low-voltage distribution panel construction and maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.